Industrial Measurement Products and Solutions
Order no.: PCE-MCA 50-ICA
The digital multimeter PCE-MCA 50 is intended for calibration and maintenance. This digital multimeter PCE-MCA 50 enables the measurement and simulation of electrical quantities. Due to the battery operation, the digital multimeter PCE-MCA 50 can be used in different locations.

- Simulation
- Pulse generation
- Pulse count
- Frequency generation
- Frequency measurement
- Extreme value and average measurement
- Continuity test
- USB interface
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,691.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GPA 50-ICA
The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 619.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GPA 62-ICA

This three-phase digital multimeter is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The three-phase digital multimeter is equipped with data logger. The test instrument is delivered manufacturer calibrated (ISO or certification as an option).


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Datalogger for 50,000 readings / software/ USB interface 
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 797.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-123-ICA

PCE-123 is a digital multimeter used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multimeter provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multimeter useful in a wide range of applications.


- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 511.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-BDM 20-ICA
This is a digital multimeter for a stationary workplace. In addition to measuring the current, voltage and resistance, the PCE-BDM 20-ICA digital multimeter can also measure the temperature using two thermocouples and also determine the conductivity.

Parameter:
- AC voltage, DC voltage
- AC / DC
- Resistance, conductivity
- Capacitance measurement, temperature
- Frequency measurement , duty cycle ratio
- Pulse width, continuity test
- Diode test
Manufacturer: PCE Instruments
£ 427.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LCT 3-ICA
The digital multimeter is the ideal measuring device to measure leakage currents. This is made possible by the extensive measuring range of the digital multimeter.

Measuring function
- AC current measurement
- DC voltage
- AC voltage
- Resistance
- Continuity test
- Temperature
- Capacity
- Diode test
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 266.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-OCM 10-ICA
The digital multimeter is characterized by the OLED display. The OLED display on this digital multimeter allows the display itself to be read in the dark, as it is self-luminous.

- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 245.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HVAC 6-ICA
The digital multimeter PCE-HVAC 6-ICA was specially developed for the tradesman in the field of heating, ventilation and air conditioning technology. This PCE-HVAC 6-ICA digital multimeter is ideal for many inspection and maintenance jobs in this area.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 236.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 41-ICA

The digital multimeter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the digital multimeter, or you can use the integrated clamp mechanism. By using the clamp of the digital multimeter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 218.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 50-ICA
The digital multimeter PCE-DC 50-ICA is a measuring device for measuring currents of up to 1000 A AC / DC. In addition to current measurement, the digital multimeter can also measure and test voltage, frequency, duty cycle, resistance, continuity test, capacitors and diodes.

- Current measurement up to 1000 A
- Cover of the measuring sockets
- Voltage measurement up to 600V
- Temperature measurement via 2 thermocouples
- Bluetooth interface
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 226.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 9EV-ICA
The digital multimeter is a measuring device for the precise determination of electrical currents. With a current clamp diameter of 25 mm and a measuring range of 0 … 1000 A AC/DC, the digital multimeter covers a large part of all measurement tasks. The digital multimeter can be used to monitor the wallbox of an electric vehicle on both the primary and secondary side.

- Wallbox monitoring (primary/secondary)
- Measuring range: 0 ... 1000 A AC/DC
- Inductive current measurement
- Direct current
- Alternating current
- Frequency
- Inrush AC
- AC low-pass filter (LPF)
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 244.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LCT 1-ICA
With the PCE-LCT 1-ICA digital multimeter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The PCE-LCT 1-ICA digital multimeter captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 200.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CM 40-ICA
The flexible digital multimeter PCE-CM 40-ICA is suitable for current measurements up to 3000 A AC. In addition to TRMS current measurement, the flexible digital multimeter PCE-CM 40-ICA can be used to measure inrush currents. The measurement of the current takes place via a flexible Rogowski coil. 

- Measuring range up to 3000 A AC
- LC display
- Inrush function
- Frequency measurement
- Data memory
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 191.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC3-ICA
This digital multimeter was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this digital multimeter.

- AC/DC current, AC voltage and frequency measurement
- AC voltage test (contactless test):
   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
- DCA zero point function
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 175.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 20-ICA
The AC/DC digital multimeter is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the AC/DC digital multimeter.

Measurement functions
- DC current
- AC current
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 182.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC2-ICA

Digital Multimeter for measuring AC/DC current, AC voltage and resistance. This digital multimeter is designed to indirectly detect AC/DC current and ohms. The multimeter  has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The multimeter comes manufacturer calibrated and can optionally be certified according to ISO or standards.


- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 166.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC1-ICA
This digital multimeter was developed for the indirect acquisition of AC / DC currents as well as the frequency. A non-contact voltage tester function and a flashlight for illuminating the measuring point were also integrated in this digital multimeter.

- AC / DC current, AC voltage and frequency measurement
- Integrated measuring point illumination
- Non-contact voltage tester
- Automatic range selection
- Forceps opening: 18 mm
- Automatic switch-off
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 143.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CM 5-ICA
The digital multimeter is a multimeter with a multitude of different functions. Current measurements up to 200 A AC can be carried out with the current clamp without contact. This current range of the digital multimeter covers a large range of current measurements.

Measurement function:
- AC current
- DC current
- DC voltage
- AC voltage
- LowZ AC/DC
- Resistance
- Continuity test
- Diode test
- Capacitances
- Temperature (type K)
- Frequency (with current clamp)
- Frequency (with voltage measurement)
- Frequency (direct measurement)
- Duty cycle
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 148.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-DC 10-ICA
The digital multimeter is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a digital multimeter must be connected in series to the load.

Measuring function
- AC current
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 145.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CM 3-ICA
The PCE-CM 3 digital multimeter is used for quick and easy AC measurements. For current measurement, the PCE-CM 3 digital multimeter is plugged over the live conductor. The digital multimeter PCE-CM 3 is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 141.00

Price excl. VAT &. delivery
2 year Warranty