Industrial Measurement Products and Solutions
Order no.: PCE-A-315

The PCE-A-315 inline moisture sensor provides exceptionally accurate grain moisture measurement in real time. The PCE-A-315 in-process moisture meter uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


- Boasts a measurement range of 5% to 40% for moisture
  content during continuous mass flow
with an error of just ±0.5%
  from 5% to 18% grain moisture
- Lowers energy costs by enabling shorter drying times and
  reduces labor costs by automating the moisture monitoring
  process
- Provides nearly maintenance-free operation, delivering
  consistently accurate moisture readings over time
- Analog output of 4 to 20 mA can be converted to digital for dryer control


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 220

Moisture sensor for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture sensor for liquid materials has a processing unit with RS232/RS485 interfaces.


- Measurement range: 0 ... 100 %
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 240-B

Suitable for determining the humidity of bulk substances, this absolute moisture sensor can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.

- PCE-MWM 240-B Rod sensor (custom length 500 ... 1500 mm)

- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 240-A

Designed specifically for use in humidity measurement of bulk materials, this moisture sensor is installed in bins, silos, troughs, bunkers case, distributors, augers and conveyors. Material in bulk or flowing mass, such as fibrous materials, gravel, sawdust, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, seed, pastes, ... is continuously measurable.

- Stainless sensor rod (250 mm length)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 210

For industrial continuous production of wood pellets, chips, sawdust and similar materials when in-line moisture measurement for monitoring and controlling the mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 210 moisture sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)
- Questionnaire starts evaluation process  

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 200

The moisture sensor is a sensor for measuring moisture of sand consisting of a central probe surrounded by four other probes. The probes and sensor housing are made of stainless steel AISI 321. Our moisture sensor is ideally suited for installation in tanks with liquid materials such as fuel oil, sludge from cement production, fuels (CWF).


- Readability mass fraction of water: 0 ... 100%
- Moisture measurement range: ± 0.1 ... 100% (water mass fraction))
- Maximum permissible absolute error moisture measurement: Varies by material, lab test required
- Temperature range: +5 ... +80 °C

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 300P

For industrial continuous production of wood pellets, chips, sawdust and similar materials when on-line moisture measurement for monitoring and controlling the drying and mixing process is important. Consistent quality of every batch, reduction of the consumption of materials, and shortest possible drying and mixing times are the criteria which are important in materials production. The PCE-MWM 300P moisture test sensor of PCE Instruments helps meet those criteria through highly accurate moisture measurement.


- Measuring range: 0 ... 100%
- The maximum permissible error (absolute): Lab analysis of your sample determines % error
- Temperature range: -40 ... +150 °C  (-40 ... +302 °F)
- Current consumption: 200 mA
- Power supply : 24 (18 ... 36) VDC
- Questionnaire starts evaluation process
- Application: pellets, wood chips

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 230

VHF-Band Moisture sensor Crushed soil, sand, stone, Gravel, Ore. The device is resistant to corrosion (stainless steel and dielectric materials) and can operate in the conditions deviating from the norm, for example, at temperatures of 250 °C. The moisture sensor probe can be mounted on the walls in the hoppers, in pipelines or on trays in conveyors. Due to pluggable design this version of the moisture sensor can also be used for soil moisture control.


- Measurement range: 0 ... 100 %
- Limits of error: <0.5% below 10% moisture
- Range of working temperatures:
  0 ... +90 °C (industrial version)
  0 ... +115 °C (extended temperature range)
  0 ... +250 °C (drying kilns)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: FS-3

Absolute Moisture Meter FS-3 measures the moisture content in corn and legumes very accurate. Thanks to these test instruments, the user is now able to determine the water content in freshly delivered materials.


- Measuring range: 5 ... 40 %
- Resolution: 0.1 %
- Accuracy: ±0.4 %
- Sample amount up to 300 mg
- 10000 values data storage
- Automatic Temperature Compensation (ATC)
- Interface module, printer and different characteristic curves
  as an additional option

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: PCE-MA 200

The absolute moisture meter PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The absolute moisture meter dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
Accuracy to 0.01 %

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MA 100

The absolute moisture meter PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the absolute moisture meter dries the material to be weighed, and then calculates the moisture content from the weight difference.


- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: FMD 6

The FMD 6 is a handy and versatile absolute moisture meter for reliable measurement of the moisture content of paper, wood and construction materials. The absolute moisture meter has preset characteristic curves for the moisture measurement of specific materials. The moisture meter needs external sensors (sold separately - please see accessory list) to operate. The sensors can be positioned on the surface of a material or inserted into a material, thereby permitting either non-destructive or destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%
- Memory stores up to 1,000 measurement values for transfer to PC using
  included software

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: BLL-1

With the moisture meter, you can easily and quickly determine the water content even in deep layers of bulk material. The water content is of great importance for the calorific value of the goods, so the moisture meter helps in the quality control process.


- Very long piercing probe
- Sample temperature measurement
- Temperature unit switchable
- Hold function
- Huge LCD display

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: PCE-MA 202

The PCE-MA 202 is an oven-drying absolute moisture meter for weighing and heating material samples to determine moisture content. The heating chamber warms up to 199 °C / 390 °F with the use of halogen lamps. Drying of the sample to be weighed takes place within the chamber of the absolute moisture meter and the moisture content is subsequently calculated from the difference between the initial and final weight.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 10 mg / 0.01 g / 0.1%
- Adjustable drying temperature and time

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MA 110

PCE-MA 110 is an absolute moisture meter or halogen moisture analyzer that functions on the gravimetric or loss on drying (LOD) principle. The absolute moisture meter uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the absolute moisture meter can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.01 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.1 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: FS-2

Absolute Moisture Meter FS-2 measures the moisture content in corn and legumes very accurately. Thanks to the Absolute Moisture Meter, the user is now able to determine the water content in freshly delivered materials. All test instruments come manufacturer calibrated. ISO certification can be ordered as an option.


- Measuring range: 5 ... 40 %
- Resolution: 0.1 %
- Accuracy: ±0.4 %
- Sample amount up to 300 mg
- 10000 values data storage
- Automatic Temperature Compensation (ATC)

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: FME

FME is a handheld absolute moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: PCE-WM1

PCE-WM1 is a multi-function absolute air humidity meter used to determine relative humidity (% RH), absolute humidity (g/m³), air temperature, dew-point temperature and surface temperature (°C). This Metric-only measuring instrument comes complete with an external sensor probe for taking the surface temperature of different materials.


- Temperature range: -20 ... 80°C 
- Relative humidity range: 10 ... 95% RH
- Absolute humidity range: 0.5 ... 74.4 g/m³

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: FMC

The Absolute Moisture Meter FMC can accurately measure absolute moisture in diverse building materials. To detect moisture, the test instrument has a connection for external sensors which can either be inserted into the building material or placed on it.


- Measuring range: 5-99% wood / 0-99% building materials
- Resolution: 0.1 % / Accuracy: ±0.3 %
- Sensor not included
- External probe
- For wood, paper and building materials

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: RH5

RH5 is a penetrating, nondestructive, capacitive absolute moisture meter used to measure temperature and moisture in reels, stacks and piles of paper or cardboard. Featuring data logger and PC interface capabilities, this high-tech paper humidity measuring device measures relative humidity from 0 ... 100% rh, temperature from -10 ... 60°C / 14 ... 140°F, and dew point from -55 ... 60°C / -67 ... 140°F. Affording a large graphic display and multi-language menu, the easy-to-use RH5.


- Measuring range 0...100% rH, -10 ... 60°C / 14 ... 140°F
- Offers an accuracy of ± 1.5% r.h. and ± 0.1%°C / 0.3°F
- Supplied with a 295 mm / 11.6 in aluminum sword sensor
- Stores up to 10,000 measured values 

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer