Industrial Measurement Products and Solutions
Order no.: PCE-TG 110

The thickness meter PCE-TG 110 is a thickness gauge with external high-temperature probe for ferrous and non-ferrous metals etc. The PCE-TG 110 is an ideal thickness meter for water pipes, steam pipes and pipes for chemicals. 


- Measurement range: 2.5 mm ... 200 mm / 0.10 in ... 7.87 in  (displays in mm only)
- Suitable for homogeneous materials such as metals, glass, ...
- Including special coated 5 MHz probe (usable up to 400°C / 752°F)
- External sensor

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TG 50

PCE-TG 50 is a compact ultrasonic thickness meter or gauge used to measure the thickness of metal, glass, plastic and other homogeneous materials. This portable handheld material thickness gauge operates with an external ultrasonic contact transducer sensor probe and requires the use of coupling gel or paste.

 

- Measurement range: 1.2 ... 200 mm / 0.05 ... 7.87 " (steel)
- Accuracy: ± 0.5% v. Mw. ± 0.1 mm / ± 0.0039 inch
- Resolution: 0.1 mm / 0.001 "
- Ultrasound velocity (adjustable): 800 ... 9950 m/s / 2624 ... 32644 ft/s
- External sensor
- RS-232 interface
- incl. calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-USC 20

PCE-USC 20 is a portable or benchtop ultrasonic tester or ultrasonic thickness gauge with a 5.7" TFT color LCD screen. This ultrasound-based thickness meter uses one or two contact transducers (four different probes included; 90 °, 70 °, 60 °, 45 °) to measure material or wall thickness, detect flaws or defects in welds, and monitor the effects of corrosion on pipes and tanks.


- Measurement range: 0.5 ... 9999 mm (steel; longitudinal wave)
- Operating frequency range: 0.5 ... 20 MHz
- Sound velocity: 1000 ... 15000 m/s (continuously adjustable)
- AVG and DAC evaluation methods, display and probes delay, damping and
  reinforcing functions, export and reporting functions 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 50-ICA

PCE-CT 50 is a Thickness Meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils ±3.5 % of
  1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 50

PCE-CT 50 is a Thickness Meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only non-ferrous metal substrates such as aluminum, brass, stainless steel and anodized aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 5000 microns (µm) / 200 mil
- Accuracy of ±(1 µm / 0.04 mils +2 %) of 0 µm ... 999 µm / 40 mils
  ±3.5 % of 1001 µm ... 5000 µm / 40 mils ... 200 mils
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 40-ICA

The PCE-CT 40 is a Thickness Meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only ferrous metal substrates such as steel. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 5000 µm / 200 mil
- Accuracy of ± (1 µm / 0.04 mils + 2 %) of 0 ... 999 µm ( 40 mils) / ± 3.5 % of
  1001 µm to 5000 µm (40 mils ... 200 mils)
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm
- incl. ISO Calibration Certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 40

The PCE-CT 40 is a Thickness Meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on only ferrous metal substrates such as steel. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.


- Measuring range of 0 ... 5000 µm / 200 mil
- Accuracy of ± (1 µm / 0.04 mils + 2 %) of 0 ... 999 µm (40 mils) / ± 3.5 % of
  1001 µm to 5000 µm (40 mils ... 200 mils)
- Resolution of 0.1 µm / 0.01 mil / 0.01 mm

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-FD 20

PCE-FD 20 is a portable ultrasonic tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


- Operating frequency range: 1 ... 10 MHz
- Measured time interval range: 6 ... 1000 microseconds (µs)
- Sound velocity: 1000 ... 9999 m/s 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000-ICA

The PCE-CT 5000 Thickness Meter is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Thickness Meter goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 0 ... 5000 µm / 0 ... 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)
- incl. ISO Calibration Certificate

 

Calibration certificates are issued specifically for the customer and are excluded from the right of return.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 5000

The PCE-CT 5000 Thickness Meter is an instrument for a nondestructive thickness measurement of coatings, such as varnishes, paints, etc. on steel / iron and non-ferrous metals. The extremely wide measuring range of the Thickness Meter goes up to 5000 µm or 200 mils. Gumming or plastic coatings for shock and impact protection can be controlled just as the thin paint coatings.


- Measuring range: 5000 µm / 196.8 mils
- Ferrous metals (Fe)
- Non-ferrous metals (NFe)
- Accuracy: ± 2 % or 2.5 µm / 0.1 mils (the highest value is valid)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TG 300
The PCE-TG 300 is a thickness meter with special sensors for various applications. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. For damping or scattering materials such as plastic or cast a special sensor is available.

Measuring range:
PE: pulse-echo mode 0.65 ... 600 mm (steel)
EE: echo-echo mode 2.50 ... 60 mm
Accuracy:
± 0.04 mm H [mm] (<10 mm); ± 0.4% H [mm] (> 10 mm)
H refers to the material thickness of the workpiece
Resolution: 0.1 mm / 0.01 mm / 0.001 mm (adjustable)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CT 25

The PCE-CT 25 Thickness Meter is used for quickly detecting the thickness of metals, such as steel and iron (F) as well as non-ferrous metals (N) in the automotive sector. The PCE-CT 25 Thickness Meter is used to detect damages in cars (the coating thickness of paint can say if the car has suffered any damage) to establish if the car has been in an accident and the resulting value of the car in the used car market.


- Measurement range: 0 µm ... 1000 µm / 40 mils
- Resolution: 0.1 mils / 1 µm
- Display: 3 1/2 digit LCD display
- Operating conditions: 0 ... 50°C / 32 ... 122°F 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer