Order no.: PCE-PHD 1-R

The redox meter PCE-PHD 1-R is a multifunction meter for checking water quality. The portable redox meter is very well suited for controlling the redox value in water.


- Redox: 1999 ... 0 ... 1999 mV
- Real-time data logger
- SD card memory (16 GB max.)
- RS-232 interface for online data transmission
- BNC connector
- Electrode for redox included

Manufacturer: PCE Instruments
£ 356.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-PHD 1

The PCE-PHD 1 pH / Conductivity / Salt / Oxygen Water Quality Data Logger is a portable and effective measuring device with multiple capabilities for inspecting water quality. Offering extraordinary precision at an affordable price, the data logger is used for laboratory and in situ testing of the pH value, redox, conductivity, salt content, oxygen level and temperature of water.


- Parameter: pH, Redox, Conductivity, TDS, Salt, Oxygen, Temperature
- Automatic temperature compensation
- Sampling rate of 1 sec.
- SD card memory (16 GB max.)
- Interface: RS-232
- 3 point calibration
- Electrodes for pH and conductivity included

Manufacturer: PCE Instruments
£ 343.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-WB 20SD

PCE-WB 20SD is a multifunction wet bulb temperature data logger used to measure indoor / outdoor wet bulb globe temperature (WBGT), black globe temperature (TG), wet bulb temperature (WB), dew point temperature, air temperature (TA) and relative humidity. Thus, this multipurpose data recording device is an ideal tool for evaluating heat stress risks in different work environments.


- Programmable WBGT alarm setting with audible and visual alerts
- Manual (push-button) or automatic (adjustable 1 ... 3600 sec) sampling
- SD card memory (1 ... 16 GB) allows for quick and easy data transfer to a PC

 

Manufacturer: PCE Instruments
£ 342.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-VDL 16I
The data logger PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this data logger is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Manufacturer: PCE Instruments
£ 338.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-PHD 1-PH

The pH meter PCE-PHD 1-PH is for checking the water quality. The portable pH meter is very well suited for controlling the water parameter pH.


- pH-value: 0.00 ... 14.00 pH
- Real-time data logger
- SD card memory (16 GB max.)
- Adjustable measuring rate
- Automatic calibration
- pH electrode and temperature sensor included

Manufacturer: PCE Instruments
£ 338.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-RAM 10

The radioactivity data logger PCE-RAM 10 measures α-, β-, γ- and X-rays and offers a high measurement accuracy and convenient design. Using the integrated Bluetooth interface in the data-logging radiation detector, the measured values can be sent in real time to a PC and analyzed with the included PC software.


- α-, β-, γ- and X-rays
- Bluetooth interface
- Internal memory
- PC software included

 

Manufacturer: PCE Instruments
£ 338.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-HT 420
The temperature / humidity data logger records humidity and air temperature and stores it internally. This compact and robust data logger in mini format and with a large memory (up to a maximum of 32,000 values ​​/ 16,000 values ​​per parameter) is mainly used for long-term registration (refrigerated counters in department stores, refrigerated transport, warehouses, PC climate control rooms).

- Temperature: -40 ... 70 °C / -40 ... 158 °F
- Humidity: 0 ... 100%
- Dew point calculation (accuracy ± 2°C / 3.6 °F)
- Operating temperature: -40 ... 80 °C / -40 ... 176 °F, max. 80% rH
- Datalogger for temperature and humidity
- LCD display
- E-mail when value is exceeded
- Ethernet
- Power supply or PoE (selectable)
Manufacturer: PCE Instruments
£ 338.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-HT 420IoT
The temperature / humidity data logger records humidity and air temperature and stores it internally. This compact and robust data logger in mini format and with a large memory (up to a maximum of 32,000 values ​​/ 16,000 values ​​per parameter) is mainly used for long-term registration (refrigerated counters in department stores, refrigerated transport, warehouses, PC climate control rooms).

- Temperature: -40 ... 70 °C / -40 ... 158 °F
- Humidity: 0 ... 100%
- Dew point calculation (accuracy ± 2°C / 3.6 °F)
- Operating temperature: -40 ... 80 °C / -40 ... 176 °F, max. 80% rH
- Datalogger for temperature and humidity
- LCD display
- E-mail when value is exceeded
- Ethernet with MQTT function
- Power supply or PoE (selectable)
Manufacturer: PCE Instruments
£ 338.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-007-ICA

This Data Logger meter is very economical. With this Data Logger meter you can measure wind speed and air temperature.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 325.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-PHD 1-LF

The Conductivity Data-logging Meter PCE-PHD 1-LF is for checking the water quality. The portable conductivity meter is very suitable for controlling the conductivity in the water.


- Conductivity: 0 ... 200,0 µS/cm, 0,2 ... 2,000 mS/cm ...
- Real-time data logger
- SD card memory (16 GB max.)
- RS-232 interface for online data transmission
- Adjustable measuring rate
- Electrode for conductivity included

Manufacturer: PCE Instruments
£ 321.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-RCM 12
The CO2 data logger PCE-RCM 12 is used for indicative testing of environmental parameters. The CO2 data logger PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the CO2 data logger provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
£ 320.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: GS-2

Data Logger with acoustic signal, internal memory and software.


- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Müller counting tub
- Internal memory: 2 KB
- Radiation types: Alpha 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV

Manufacturer: Gamma-Scout
£ 320.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-HT 422
The data logger is used to measure and store environmental data such as temperature, humidity, illuminance, CO2 content and TVOC concentration. The climate data logger also calculates the dew point, absolute humidity and the water vapor content in the air. The data logger is used for stationary monitoring of laboratories, greenhouses, medicine and food stores, museums, etc.

- Temperature measuring range: -20… +60 °C
- Relative humidity measuring range: 0 ... 95%
- CO2, TVOC and light measurement
- Ethernet interface: PoE compatible
- Alarm: acoustic, email, visual
- Memory: 4 GB
- Adjustable sampling / storage rate
- FTP, HTTP server
Manufacturer: PCE Instruments
£ 320.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-313A-ICA

The PCE-313A Humidity/Temp Data Logger measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313A Humidity/Temp Data Logger can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the Humidity/Temp Data Logger to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)
- Incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 320.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-322ALEQ
The noise datalogger PCE-322ALEQ is particularly suitable for measuring noise in the field of industrial, health, safety and environmental monitoring. The PCE-322ALEQ noise datalogger has a logger function, which allows storage of up to 32700 readings.


- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation


Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Manufacturer: PCE Instruments
£ 316.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-174-ICA

The PCE-174 Data Logger with memory for up to 16,000 readings is used for measuring light in industry, agriculture, and research. The Data Logger is also used for determining illumination in the workplace, shop window displays, and by designers.


- Easy to use
- Minimum, maximum and hold functions
- Backlight display
- Sampling rate: 2 sec.
- Memory size: 16,000 readings
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 307.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-HPT 1

The Data Logger with microprocessor is a high precision 1-channel temperature gauge. The Data Logger with microprocessor is ideal for use with various Pt100 sensors. These temperature logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.


- 1 channel temperature recorder
- Automatic shutdown
- High accuracy of ± 2% r.H.
- Sampling rate of 2 / sec
- Memory size: 5,000 values

Manufacturer: PCE Instruments
£ 307.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-313 S

The PCE-313 S Data Logger has been designed for professional use in fields such as the air-conditioning sector. The PCE-313 S Data Logger determines both relative humidity and ambient temperature. The PCE-313 S Data Logger can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. These logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.54 ... 120°F

 

Manufacturer: PCE Instruments
£ 298.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-SLD 10-ICA
The sound level data logger PCE-SLD 10 is used for permanent monitoring of the sound level. In addition to storing the measured values, the PCE-SLD 10 sound level data logger is able to display the measured values ​​on a display and output them as a 4 ... 20-mA analog value.

- Measuring range: 30 ... 130 dB
- Measurement accuracy: Based on class 2 according to IEC61672
- Resolution: 0.1 dB
- LC display
- SD card memory up to 16 GB
- External microphone
- Analog output with 4 ... 20-mA
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 298.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-HT71N-5

The PCE-HT 71N Data Logger detects air temperature and humidity and stores readings in its internal memory. The Data Logger has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a Data Logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.


- Measurement range: 0 ... 100% RH / -35 ... 70°C / -31 ... 158°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

Manufacturer: PCE Instruments
£ 294.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer