The Multi Channel Data Logger PCE-KD9 can be applied to either capture, visualize, save or control measuring data and processes. This multi channel data logger is a device for universal application based on Linux operating systems. Through three slots, each with inputs, the multi channel data logger can be equipped with up to 72 analogue inputs, 72 binary inputs, 36 TC inputs (e.g. type K thermal element), 18 RTD inputs (e.g. PT100 probes), 36 relay / SSR- inputs or 24 analogue outputs.

- Max. 72 analogue and binary inputs
- Graphics-capable 5.7" TFT display with touch screen
- Transmitter power supply 24 V DC / 200 mA
- 8 integrated PID controllers
- Interface RS485 / Modbus RTU
- Dimensions: 144 x 144 mm

Note: This item must be configured before ordering!

The PCE-HT 71N Data Logger detects air temperature and humidity and stores readings to its internal memory. This Data Logger is compact and has enough memory to store up to 32,000 readings, 16,000 for each parameter, and is used above all as a Data Logger, in supermarket refrigeration units, refrigerated transport, warehouses and other temperature controlled environments. These temperature and humidity logging test instruments are manufacturer calibrated. An ISO calibration certificate is an option.

- Measurement range: 0 ... 100% RH / -35 ... 80°C / -31 ... 176°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))

Data logger to measure air temperature and velocity with calculation of volume of air current and RS-232. These logging test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

- Measurement range: 0.2 ... 20.0 m/s
- Measurement range: 0.0 ... 50.0°C / 32 ... 122°F (sensor)
- Volume of air current:  0 ... 36,000 m³/min
- Internal memory: 16,000 values
- Sampling rate: 1 sec

PCE-KD3-WGH is an eight channel data logger or display recorder designed to record analog measurements of 4 ... 20 mA sensors or RTD (PT100, PT500 and PT1000) temperature sensors. In addition, PCE-KD3-WGH is a multichannel universal indicator that visualizes readings graphically on its LCD screen. The instrument can be mounted on a wall via its IP65-protected housing.

- Analog inputs: 4 ... 20 mA, RTD (selectable)
- Digital input: 24 V DC
- Resolution: 12 bits
- Measuring channels: Maximum 8 (selectable)
- Memory: 8 MB, approx. 2 million readings

The data logger PCE-PDA 1000L measures the relative pressure on machines and systems. The relative pressure is measured by this data logger in the range between -100 ... 2000 kPa. The data logger PCE-PDA 1000L has a quick coupling connection with which the air pressure or water pressure can be directly applied to the device.

- Measuring range pressure: -100 ... 2000 kPa relative / -14.5 ... 290 PSI
- Resolution: 0.01 kPa, 0.1 kPa
- Accuracy: <± 0.5% of the measuring range
- USB interface
- Data logger
- Adjustable measuring units: Pa, hPa, kPa, MPa, mbar, bar, ATM, kg / cm², mmH2O, cmH2O, inH2O, mmHg, inHg, Torr, PSI, PSF

The pH / Conductivity / Salt / Oxygen Water Quality Data Logger PCE-PHD-1-KIT1 is a true all-rounder for checking water quality. The portable data logger is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Storage, electrolyte, conductance and calibration solutions are included in this comprehensive kit. 

- Measuring range: pH value: 0.00 ... 14.00 pH
- Conductivity: 0 ... 200 µS/cm, 0.2 ... 2.0 mS/cm, 2 ... 20.0 mS/cm, 20 ... 200 mS/cm
- TDS: 0 ... 132 ppm, 132 ... 1320 ppm, 1320 ... 13200 ppm, 13200 ... 132000 ppm
- Oxygen: 0 ... 20.0 mg/l 
- Temperature: 0 ... 60.0 °C / 32 ... 140 ºF
- 2 point calibration, pH4 + pH7

- incl. Storage solution
- incl. pH4 + pH7
- incl. Electrolyte solution
- incl. Conductance solution
- incl. Carrying case

PCE-KD5 is a display recorder or data logger for the capturing, monitoring and controlling of process parameters. The data logger is based on a Linux operating system and has three slots that can be equipped with several different inputs and outputs. Depending on your specific needs, it is possible to equip the PCE-KD5 data logger with up to 48 analog or binary inputs, 24 thermocouple inputs, 12 resistance temperature detector (RTD) inputs, 16 relays / solid state relays (SSRs) or 8 analog outputs.

- Up to 48 analog or binary inputs
- Up to 24 thermocouple inputs
- Up to 12 inputs for RTDs
- Up to 16 relays / SSRs
- Maximum sampling rate of 10 Hz
- 1.5 GB internal memory

 **Not eligible for 30-day return policy due to custom configuration**

The PCE-JR-911 Data Logger is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This Data Logger comes complete with a Data Logger, allowing the user to program specific time intervals for taking measurements, such as over an entire week.

This kind of temperature logging testers is manufacturer calibrated and the ISO certificate is delivery included.

- Non-Contact temperature measurement (infrared)
- Sampling rate: 1/ sec.
- Memory size: 12,000 values
- Adjustable date and time
- Printer, memory, data Logger integrated
- Incl. ISO calibration certificate

The data logger PCE-KD3 was developed to measure and record measured values ​​of standard analog signals or temperature sensors. In addition, the data logger PCE-KD3 can visualize the measured values ​​graphically. The PCE-KD3 is optionally equipped with 1, 4 or 8 measuring channels.

- Analog inputs: 4 ... 20-mA / 0 ... 10V, RTD / TC (selectable)
- Digital input: 24V DC
- Resolution: 12 bits
- Measuring channels: Maximum 8 (selectable)

Note: This item must be configured before ordering!

The Data Logger with microprocessor is a high precision 1-channel temperature gauge. The Data Logger with microprocessor is ideal for use with various Pt100 sensors. The temperature logging test instruments are manufacturer calibrated (ISO calibration certificate is included).

- High precision: ±2% r.H.
- 1 channel temperature Recorder
- Automatic shutdown
- Memory size: 5,000 values
- Sampling rate: 2/sec.
- Incl. ISO calibration certificate

- Automatic range: 30 ... 130 dB
- Manual range: 30 ... 80 / 50 ... 100 / 80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory capacity: 32700 values
- incl. software for LEQ calculation
- incl. ISO calibration certificate

Important! The LEQ value is only calculated by the software after the data transfer from the device to the PC or laptop.

Data Logger with acoustic signal, internal memory and software.

- Measurement ranges: 0.01 µSv / h - 1000 µSv / h
- Radiation detector: Geiger-Muller counting tub
- Internal memory: 2 KB
- Radiation types: Alpha 4 MeV, Beta 0.2 MeV, Gamma 0.02 MeV.
- Online, to transfer data to a PC , with pulse interval of 10, 30 or 60 sg
- With additional alarm and acoustic pulse indicator