Vibration Data Logger PCE-VM 5000-KIT
£ 2,536.00
Price excl. VAT &. delivery

The 4-channel PCE-VM 5000 vibration data logger performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration data logger is able to record vibrations at different points of the component to be tested.


  • Frequency range: 10 Hz … 1 kHz
  • Measurement of acceleration, velocity and displacement
  • Connection of up to 4 sensors simultaneously
  • Data storage on SD card
  • Including 2 additional sensors for vibration

Data Logger PCE-830-2
£ 2,403.00
Price excl. VAT &. delivery

The PCE-830-2 Data Logger is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logger also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


  • PCE-830 + PCE-6802 amp clamp (1000 A)
  • Electrical conductor pick-up: 55 mm / 2.1 in diameter
  • Range selection: manual (10 A, 100 A, 1000 A)
  • Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
  • Sampling rate: 2 sec.
  • Memory size: 512 kB (max. 52,000 values (single phase)

Vibration Data Logger PCE-VM 22
£ 2,397.00
Price excl. VAT &. delivery

The vibration data logger has a measuring range of 0 … 200 m/s² for acceleration. In addition to acceleration, the vibration data logger can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

  • Acceleration
  • Velocity
  • Displacement
  • Frequency
  • Tachometer
  • Infrared temperature measurement   
  • 4 GB data memory
  • FFT analysis and wave view of the vibration

Data Logger / Data Logging Instrument PCE-SLM 50-ICA incl. ISO-Calibration Certificate
£ 2,306.00
Price excl. VAT &. delivery
ISO Calibration
The Data Logger / Data Logging Instrument is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The Data Logger / Data Logging Instrument also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer.

  • Measuring range: 21 ... 143 dBA
  • Resolution: 0.1 dB
  • Class 1 accuracy IEC61672-1:2013
  • Frequency range: 10 Hz ... 20 kHz
  • Frequency weighting: A, C, Z
  • Time weighting: S, F, I
  • Ethernet, WiFi, USB Type-C
  • Internal memory: 8 GB
  • External SD card support: 32 GB / 64 GB
  • Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
  • 4-inch TFT touch display
  • PC software
  • incl. ISO-Calibration Certificate
Vibration Data Logger PCE-VM 5000-ICA Incl. ISO Calibration Certificate
£ 2,296.00
Price excl. VAT &. delivery
ISO Calibration

The 4-channel PCE-VM 5000-ICA Vibration Data Logger performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.


  • 4 channels / inputs
  • Frequency range: 10 Hz … 1 kHz
  • Measurement of acceleration, velocity, displacement
  • Connection of up to 4 sensors simultaneously, 2 included
  • Data storage on SD card
  • Sampling rate: minimum 1 sec.
  • Incl. ISO calibration certificate

Data Logger / Data Logging Instrument PCE-SLM 50
£ 2,221.00
Price excl. VAT &. delivery
The Data Logger / Data Logging Instrument is certified in accordance with IEC 61672-1:2013, Class 1 and is ideally suited for professional use in noise monitoring. With a wide frequency range from 10 Hz to 20 kHz and extensive filter options, the device enables precise measurements in almost all areas of application. The Data Logger / Data Logging Instrument also impresses with its comprehensive connectivity: Ethernet, WiFi and USB Type-C enable flexible and uncomplicated data transfer.

  • Measuring range: 21 ... 143 dBA
  • Resolution: 0.1 dB
  • Class 1 accuracy IEC61672-1:2013
  • Frequency range: 10 Hz ... 20 kHz
  • Frequency weighting: A, C, Z
  • Time weighting: S, F, I
  • Ethernet, WiFi, USB Type-C
  • Internal memory: 8 GB
  • External SD card support: 32 GB / 64 GB
  • Measurement parameters: Lp, Lmax, Lmin, Leq, Lpeak
  • 4-inch TFT touch display
  • PC software
Sound Level Data Logger w/GPS PCE-432-ICA incl. ISO Cal. Cert.
£ 2,136.00
Price excl. VAT &. delivery
ISO Calibration

PCE-432-ICA is a class 1 sound level data logger that meets IEC 60651:1979, IEC 60804:2000, IEC 61672-1:2013, ANSI S1.4-1983 and ANSI S1.43-1997 requirements. This portable high-accuracy sound level data logger is equipped with GPS functionality, allowing measured values to be assigned to a precise geographic location. The sound level data logger calculates the equivalent continuous sound level Leq (LXeq).

  • Measuring range: 22 … 136 db(A)
  • LXY (SPL), Leq (LXeq), LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN
  • Frequency weighting: A, B, C and Z
  • Time weighting: Fast (125 ms), slow (1 sec) and impulse (35 ms), decay (1500 ms)
  • GPSreceiver for location determination
  • Adjustable data-recording interval from 1 s … 24 h
  • 1/1 octave band filter (optional 1/3 octave band filter upgrade)
  • incl. ISO Calibration Certificate

Data Logger PCE-830-3
£ 2,134.00
Price excl. VAT &. delivery

The PCE-830-3 Data Logger is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logger also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


  • PCE-830 + PCE-3007 flexible amp clamp (3000 A)
  • Electrical conductor pick-up: 170 mm / 6.69 in diameter
  • Length of electrical conductor: 610 mm / 24.0 in
  • Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
  • Sampling rate: 2 sec.
  • Memory size: 512 kB (max. 52,000 values - single phase)

Data Logger PCE-830-1
£ 2,133.00
Price excl. VAT &. delivery

The PCE-830 Data Logger is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logger also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


  • PCE-830 + PCE-6801 amp clamp (100 A)
  • Electrical conductor pick-up: 30 mm / 1.1 in diameter
  • Range selection: manual (1 A, 10 A, 100 A)
  • Clamp dimensions: 210 mm x 62 mm x 36 mm / 8.2 in x 2.4 in x 1.4 in
  • Sampling rate: 2 sec.
  • Memory size: 512 kB (max. 52,000 values (single phase)