- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!

The temperature data logger has two measuring inputs. Each measuring input from the temperature data logger can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the temperature data logger shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points
- incl. ISO Calibration Certificate

This handheld, portable, professional Class II noise level meter or decibel (dB) meter has built-in data-logging or data-recording functionality. Thus, the sound level data logger is ideal for real-time noise measurement as well as for long-term noise exposure monitoring over time. This sound level data logger is supplied with with an ISO calibration certificate (PCE-322A-ICA).

- Sound measuring range: 30 ...130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Memory: Stores up to 32,700 readings
- Sampling rate: 2 times per second
- Incl. ISO Calibration Certificate

The humidity / temperature / CO2 / CO data logger has a CO² measuring range of 0 ... 9999 ppm. In addition to the carbon dioxide measurement, the data logger also has a carbon monoxide (CO) sensor with a measuring range of 0 ... 1000 ppm and a temperature and humidity sensor.

- Carbon monoxide (CO): 0 … 1000 ppm
- Carbon dioxide (CO²): 0 … 9999 ppm
- Temperature: 0 … 50 °C / 32 … 122 °F
- Humidity: 0 … 100% RH
- Data memory for 5000 measuring points
- Data export CSV
- Power supply: rechargeable battery

Measuring function
- Temperature: -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% rh (external)
- Memory for 25,920 readings
- Saves as PDF
- Incl. ISO calibration certificate

- Air temperature: -20 ... 60 °C / -4 ... 140 °F
- Humidity: 0 … 100% RH
- Wet bulb temperature, dew point
- Data memory for 32,000 readings
- Type K thermocouple
- incl. ISO Calibration Certificate

The air flow / temperature data logger measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the air flow / temperature data logger can measure the volume flow and the ambient temperature.

- Measuring range: 0.3 ... 30.0 m/s / 0.98 ... 98.4 ft/s
- Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
- Probe diameter: Ø0.8 ... 1.2 mm / 0.031 x 0.047"
- Data memory for 960 measured values
- Wind speed
- Volume flow
- Temperature measurement

This weather data logger with outside sensor is a real all-rounder. The wireless weather data logger with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless weather data logger and outside sensors. The weather data of the weather data logger with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.

- 3 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km/h, m/s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

The sound level data logger is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The sound level data logger has a logger function which enables the storage of up to 32,700 measured values.

- Automatic range: 30 ... 130 dB
- Manual ranges: 30 ... 80/50 ... 100/80 ... 130 dB
- Resolution: 0.1 dB
- Accuracy: ±1.4 dB
- Data logger function for 32,000 values
- Including sound calibrator

Sound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.

Class II Acoustic Sound Calibrator
- Sound pressure level 94, 104, 114 db
- For weighting filters A, B, C and D
- 1/2 inch microphone connection
- Class II

The PCE-T390 multi channel temperature data logger is a digital device with four input channels for type K and type J temperature sensors and two input channels for PT100 temperature sensors. The PCE-T390 multi channel data logger has a SD card slot (from 1 ... 16 GB) for storing the measured data. The data is stored in xls format on the SD card of the data logger so that no additional software is needed for further analysis. This temperature logging test instrument comes manufacturer calibrated. An ISO calibration certificate can be purchased as an optional accessory.

- 4 input channels for type-K, J temperature sensors
- 2 input channels for Pt100 temperature sensors
- 2 x type-K TF-500 temperature sensors are included in the package
- Sampling rate of 1 sec.
- SD card memory (1 ... 16 GB)

 

Measuring function
- Temperature: -30 ... 65°C / -22 ... 149°F (Internal)
                          -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% RH (Internal & External)
- Memory for 25,920 readings
- Saves as PDF
- Incl. ISO calibration certificate

The Temperature / Humidity / Barometric Pressure Data Logger records the air temperature as well as the relative humidity and the barometric pressure and saves them internally on an SD card. The compact device with a large memory (up to max. 16 GB SDHC card) is primarily used for long-term registration in the food sector (refrigerated counters in department stores, refrigerated transports, warehouses) as well as for measurement and recording in industry (heating and cooling processes, machine temperatures, product storage, etc.).

Measuring ranges
- Temperature: 0 ... 50 °C /  32 ... 122 °F
- Relative humidity: 10 ... 90% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar)
- Selectable pressure unit: hPa, mmHg and inHg
- Real-time data storage

- Noise level range: Auto 30 ... 130 dB
- Resolution: 0.1dB
- Accuracy: ±1.4dB
- Frequency range: 31.5 Hz...8 kHz
- Frequency Rating: A and C
- Data interface: USB, Bluetooth 4.0
- Free app
- Accuracy class: IEC61672-1 Class 2

The PCE-HT 71N Data Logger detects air temperature and humidity and stores readings in its internal memory. The Data Logger has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.

- Measurement range: 0 ... 100% RH / -35 ... 70°C / -31 ... 176°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))
- Incl. ISO calibration certificate 

The PCE-HT 71N humidity / temperature data logger detects air temperature and humidity and stores readings in its internal memory. The humidity / temperature data logger has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.

- Measurement range: 0 ... 100% RH / -35 ... 70°C / -31 ... 176°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))
- Incl. ISO calibration certificate 

The temperature data logger has two measuring inputs. Each measuring input from the temperature data logger can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the temperature data logger shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points