Paint Thickness Tester PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificate
£ 637.00
Price excl. VAT &. delivery
ISO Calibration
The paint thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

  • Measuring range: 1.20 … 300.0 mm  / 0.04 … 11.81"
  • Accuracy: ±0.5% of measured value + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
  • Probe temperature range: -10 … 60 °C / 14 … 140 °F
  • incl. ISO Calibration Certificate
Paint Thickness Tester PCE-CT 80-FN0D5
£ 616.00
Price excl. VAT &. delivery
The paint thickness tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics …) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the paint thickness tester, measuring points that are difficult to access can also be easily reached.

  • Measuring range: Fe: 0 … 500 µm, NFe: 0 … 500 µm
  • Accuracy after foil calibration: ±(1% of reading + 1 µm)
  • For many materials such as: iron, steel, aluminum, copper, brass, stainless steel
  • Diameter: 17mm / 0.67"
Paint Gloss Tester PCE-RM 100
£ 599.00
Price excl. VAT &. delivery
The gloss or opacity meter PCE-RM 100 is used to measure the reflection properties of surfaces related to opacity. The gloss meter PCE-RM 100 is used in tinting glass, film quality, opacity of paper, light shading and the hiding power of various paints, inks, and coatings. 

  • Measuring range: 0 … 100 (0 is transparent and 100 is fully opaque)
  • Optical measurement angle: 45º degree angle
  • Measuring accuracy: ± 1
  • Resolution: 0.1
  • Battery operation
  • Interface and software
Paint Thickness Tester PCE-CT 28-ICA incl. ISO Calibration Certificate
£ 570.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-CT 28 Thickness Gauge for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Thickness Gauge stands out due to its high range of measurement.


  • Measurement range: 0 … 1250 µm / 49.2 mils
  • Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm … 99.9 µm / 3.9 mils)  1 µm / 0.04 mils (above the range)
  • Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
  • Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits
  • Incl. ISO Calibration Certificate

Paint Gloss Tester PCE-PGM 60
£ 557.00
Price excl. VAT &. delivery

PCE-PGM 60 is a portable handheld gloss meter or gloss tester used to evaluate the shine on different material surfaces. The gloss tester includes a 3.5" TFT touchscreen display, internal memory and PC-compatible software for detailed analysis.


  • Measuring geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Includes PC-compatible software for detailed analysis
  • Light source: D65
  • Wave length: 400-700 nm

Paint Gloss Tester PCE-GM 75-ICA Incl. ISO Calibration Certificate
£ 552.00
Price excl. VAT &. delivery
ISO Calibration
The gloss meter has a measuring surface of Ø 4.5 mm. Thanks to this small measuring surface, the gloss meter enables measurements on particularly small surfaces. With a maximum inaccuracy of 1%, the gloss meter is a high-precision measuring instrument for fast and easy measurements on surfaces.

  • Measuring range up to 1000 GU
  • For measurements on small surfaces
  • Precise measurements thanks to high accuracy
  • Micro-USB interface for the PC connection
  • Data memory for later evaluations
  • Data memory: 1,245 measured values- Incl. ISO calibration certificate
Paint Gloss Tester PCE-GM 80
£ 548.00
Price excl. VAT &. delivery
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
Paint Thickness Tester PCE-TG 150 F2.5
£ 531.00
Price excl. VAT &. delivery
The paint thickness tester can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the paint thickness tester.

  • Measuring range: 1.20 … 300.0 mm  / 0.04 … 11.81"
  • Accuracy: ±0.5% of measured value + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
  • Probe temperature range: -10 … 60 °C / 14 … 140 °F
Paint Gloss Tester PCE-GM 60Plus-ICA incl. ISO calibration certificate
£ 505.00
Price excl. VAT &. delivery
ISO Calibration

The PCE-GM 60Plus gloss meter is a portable handheld 60 degree gloss meter. This coating and paint gloss meter measures the gloss units (GU) on a material's surface. The rechargeable gloss meter or gloss tester uses reflected light for gloss measurement per ISO 2813, GB/T 9754, ASTM D523 and ASTM D2457 standards.


  • Measuring geometry: 60° degree angle
  • Measuring range: 0 … 200 GU
  • Measuring accuracy ±1.5 GU
  • 3.5" TFT touchscreen display
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate