- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate

The wind speed alarm PCE-WSAC 50W 24-ICA is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. Due to the integrated 4 ... 20-mA analogue output of the wind speed alarm, the measured data can also be transferred to other controllers for evaluation.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s 
- Incl. ISO calibration certificate

- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s

The wind speed alarm controller PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the wind speed alarm controller means stormy gusts can also be monitored.

- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s

Wind meter KWS1 for, for example, PCE-WL windlogger. Simple cross-hair anemometer with pulse output and wind direction sensor. Wind measuring device for the measurement of the wind speed and the wind direction of the horizontal air flow. The shutter speed is scanned free of contact and wear and has a particularly light start-up. The wind flap position is detected by resistance. The digital measuring signals from the wind meter can be evaluated directly.

- Measuring range: 0.9 ... 40 m/s / 5 ... 355 °
- Output signal: 0 ... 100 Hz Pulse / 0 ... 1000 Ohm
- Installation: mast mounting 31 mm drm.
- Heating: No

PCE-WSAC 50 is an Wind Alarm Controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This Wind Speed Alarm allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.

- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

 

Compact wind sensor CWG1 for weather monitoring. Basic cup anemometer with 4 … 20 mA output.

- Output: 4 … 20 mA
- Measurement reading range: 0 … 50 m/s
- Accuracy: ± 0,5 m/s or 3 % v.M

 

Basic wind transmitter for monitoring tasks. Ideal measuring transducers for basic requirements and appropriate for cost effective solutions.

- Output: 0 … 10 V
- Measurement reading range: 0.9 … 40 m/s
- Accuracy: ± 0.5 m/s or 5 % v. M

 

The wind speed sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

- Output signal: 4 … 20-mA  
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s  … 50 m/s (1.1 ... 111.8 mph)

 

The wind speed sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form. With heating.

- Output signal: 0 … 10V
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

 

The wind speed sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form.

- Output signal: 4 … 20-mA
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)

 

The wind speed sensor is compatible with and can be mounted on to a wide variety of available measuring equipment. The sensor will detect even the minutest movements of air and the results are then output in analogue form.

- Output signal: 0 … 10V
- Operating voltage: 12 … 36V DC
- Measurement reading range: 0.5 m/s … 50 m/s (1.1 ... 111.8 mph)