PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

- Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
- Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
- Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
- Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
- Memory size: 1,000 groups for measurement data and 20 groups for calibration data
- Different probe types (also automatic motorized probes) available

PCE-USC 20 is a portable or benchtop ultrasonic thickness tester or ultrasonic thickness gauge with a 5.7" TFT color LCD screen. This ultrasound-based thickness meter uses one or two contact transducers (four different probes included; 90 °, 70 °, 60 °, 45 °) to measure material or wall thickness, detect flaws or defects in welds, and monitor the effects of corrosion on pipes and tanks.

- Measurement range: 0.5 ... 9999 mm (steel; longitudinal wave)
- Operating frequency range: 0.5 ... 20 MHz
- Sound velocity: 1000 ... 15000 m/s (continuously adjustable)
- AVG and DAC evaluation methods, display and probes delay, damping and
  reinforcing functions, export and reporting functions 

 

PCE-FD 20 is a portable ultrasonic thickness tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.

- Operating frequency range: 1 ... 10 MHz
- Measured time interval range: 6 ... 1000 microseconds (µs)
- Sound velocity: 1000 ... 9999 m/s 

 

The ultrasonic flow tester is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow tester works according to the transit time difference method. The measuring principle of the ultrasonic flow tester is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 ... 4")
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1, TDS-S1
- Incl. evaluation software
- Incl. 2-channel temperature datalogger
- Incl. ISO Calibration Certificates

The UCI hardness tester PCE-3000UL can be used for quickly checking the hardness of components even after installation, two probes are included. The device offers a wide measurement range, easy handling, robust design, and a temperature resistance up to 40 °C (104 °F). Measures hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC. The tester comes with two probes, one UCI probe for non-destructive testing and one Leeb probe for rebound testing.

- Non-destructive hardness testing
- Ultrasonic + Leeb hardness test method
- Ideal for thin metals, complex shapes, hardened layers, or requiring very small indentation
- Fast measurement times with very high accuracy
- 2 probes for UCI and Leeb rebound testing

 

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.

- Probe is 50 Newtons / 11.2 lbf force, 10 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting

 

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting 

 

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.

- Probe is 98 Newtons / 22 lbf force, 10 and 50 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting 

 

The measuring principle of the two devices is quite simple. The ultrasonic flow tester can be used for measuring on metallic pipes, plastic pipes or rubber pipes, while the ultrasonic material thickness tester can be used for metals, glass and homogeneous plastics.

Ultrasonic flow tester
- Measuring range: -32 ... +32 m/s
- Resolution: 0.0001 m/s
- Flow sensors for 20 ... 108 mm (approx. 3/4 … 4") pipe diameter
- Flow sensors for 50 ... 700 mm (approx. 2 … 28") pipe diameter
- Incl. ISO calibration certificates
Ultrasonic thickness tester
- Measuring range: 1.2 ... 200.00 mm (steel)
- Accuracy: ±0.5 % ±0.1
- Resolution: 0.1 mm
- Incl. ISO calibration certificate

The ultrasonic flow tester is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow tester works according to the transit time difference method. The measuring principle of the ultrasonic flow tester is quite simple. 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 ... 4")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-S1
- Incl. evaluation software
- Incl. 2-channel temperature datalogger
- Incl. ISO Calibration Certificates

The ultrasonic flow tester is required as part of a control measurement or to quickly determine the flow in a pipeline and is a portable / easy-to-install measuring system. The ultrasonic flow tester works according to the transit time difference method. The measuring principle of the flow tester is quite simple.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe sizes: 50 … 720 mm (approx. 1.9 … 28")
                      20 …108 mm (approx. 0.8 … 4.2")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-HM and TDS-HS on rails
- Incl. ISO Calibration Certificate

The ultrasonic flow tester is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow tester works according to the transit time difference method. The measuring principle of the ultrasonic flow tester is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 ... 4")
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1, TDS-S1
- Incl. evaluation software
- Incl. 2-channel temperature datalogger

The ultrasonic flow tester is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow tester works according to the transit time difference method. The measuring principle of the ultrasonic flow tester is quite simple. 

 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 50 … 700, 57 … 720 mm (approx. 2 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-M1
- Incl. evaluation software
- Incl. temperature datalogger
- Incl. ISO Calibration Certificates

- Measurement according to UCI method
- Testing of HRC, HRB, HV, HB, MPa
- Measuring direction 360 °
- Large LCD
- USB interface
- Incl. 50 N / 11.2 lbs UCI probe

The ultrasonic flow tester can be used to measure on metallic pipes, plastic pipes or rubber pipes. This set consists of an ultrasonic flow tester and an ultrasonic material thickness tester for metals, glass and homogeneous plastics.

Ultrasonic flow meter
- Measuring range: -32 ... +32 m/s
- Resolution: 0.0001 m/s
- Pipe size: DN 50 … 700, 57 … 720 mm
- Incl. sensors TDS-M1
- Incl. ISO calibration certificate
Ultrasonic material thickness meter
- Measuring range: 1.2 ... 200.00 mm (steel)
- Accuracy: ±0.5 % ±0.1
- Resolution: 0.1 mm
- Incl. ISO calibration certificate

This set consists of an ultrasonic flow tester and an ultrasonic material thickness tester for metals, glass and homogeneous plastics. The ultrasonic flow tester can be used to measure on metallic pipes, plastic pipes or rubber pipes.

Ultrasonic flow tester
- Measuring range: -32 ... +32 m/s
- Resolution: 0.0001 m/s
- Pipe size: DN 15 … 100, 20 … 108 mm
- Incl. sensors TDS-S1
- Incl. ISO calibration certificate
Ultrasonic thickness tester
- Measuring range: 1.2 ... 200.00 mm (steel)
- Accuracy: ±0.5 % ±0.1
- Resolution: 0.1 mm
- Incl. ISO calibration certificate

The ultrasonic flow tester is required as part of a control measurement or to quickly determine the flow in a pipeline and is a portable / easy-to-install measuring system. The ultrasonic flow tester works according to the transit time difference method. The measuring principle of the flow tester is quite simple.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe sizes: 50 … 720 mm (approx. 1.9 … 28")
                      20 …108 mm (approx. 0.8 … 4.2")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, Z
- Incl. sensors TDS-HM and TDS-HS on rails

The ultrasonic flow tester is required as part of a control measurement or to quickly determine the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow tester works according to the transit time difference method. The measuring principle of the ultrasonic flow tester is quite simple. 

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 100, 20 … 108 mm (approx. 3/4 ... 4")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-S1
- Incl. evaluation software
- Incl. 2-channel temperature datalogger

The measuring principle of the two devices is quite simple. The ultrasonic flow tester can be used for measuring on metallic pipes, plastic pipes or rubber pipes, while the ultrasonic material thickness tester can be used for metals, glass and homogeneous plastics.

Ultrasonic flow tester
- Measuring range: -32 ... +32 m/s
- Resolution: 0.0001 m/s
- Flow sensors for 20 ... 108 mm (approx. 3/4 … 4") pipe diameter
- Flow sensors for 50 ... 700 mm (approx. 2 … 28") pipe diameter
Ultrasonic thickness tester
- Measuring range: 1.2 ... 200.00 mm (steel)
- Accuracy: ±0.5 % ±0.1
- Resolution: 0.1 mm

PCE-TDS 100HSH-ICA is a portable handheld clamp-on ultrasonic flow tester used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4 in ... 4in. Software sold separately - see accessories for details.

- Measuring range: -32 ... 32 m/s, -105 ... 105 ft/s
- Resolution: 0.0001 m/s, 0.00033 ft/s
- Pipe size: DN 15 … 700, 20 … 720 mm (approx. 3/4 … 28")
- Sensor temperature range: 0 ... 160°C / 32 ... 320°F
- Sensor installation: V, (N,W)
- Incl. sensors TDS-M1 and TDS-S1
- Incl. ISO Calibration Certificate