The temperature meter PCE-893-ICA is suitable for simple temperature measurements. The emissivity of the surface can be adjusted on the PCE-893-ICA temperature meter. Thus, the temperature meter PCE-893-ICA is suitable for almost all surfaces.

Infrared measurement

• Measuring range: -50 … 1200 °C / -58 … 2192 °FThermoelement  
• Measuring range: -50 … 1370 °C / -58 … 2498 °F
• Optical resolution 50:1 infrared optics
• Adjustable emissivity
• Thermocouple type-K can be connected
• includes ISO Calibration Certificate

With the non-contact temperature meter you get a measuring device with which you can perform a wide range of measuring tasks. On the one hand, you can directly measure and read the temperature of bodies without contact, on the other hand you can also save the measured values internally in the data logger and transfer them to a PC or laptop via the RS-232 interface.

• Range: -40 … +500 °C / -40 … 932 °F
• Resolution: 0.1 °C / 0.18 °F
• Accuracy: ±2%
• Memory: 4 x 99 values
• E-factor: 0.3 … 1.0 (adjustable)
• incl. software and RS-232 cable
• incl. ISO calibration certificate

• Temperature: 0 ... +50 ºC / 32 ... 122 ºF
• Ambient humidity: 0 ... 100% RH
• Atmospheric pressure: 300 ... 2000 hPa
• CO2: 0 ... 40000 ppm
• 32 GB data storage
• E-paper display with histogram display
• Good / medium / bad rating
• Battery life: approx. 10 months
• incl. ISO-Calibration Certificate

• measurement range: -10 ... +400 °C
• resolution: 0.1 °C
• accuracy: ±2 °C
• frame rate: 25 Hz
• Display resolution: 120 x 90 pixels
• thermal sensitivity: 0.06 °C
• field of view: 38 ° (H) x 50 ° (V)

The PCE-VA 20 is a versatile multifunction temperature meter for determining environmental conditions such as wind, temperature and humidity. It is additionally used to test heating, ventilation and air conditioning / cooling (HVAC) systems. This triple thermometer-hygrometer-anemometer device has a 10 cm / 3.9" Ø fan impeller and a clear backlit LCD. Available functions include display hold, average / maximum / minimum value, auto shutdown, low-battery warning, and metric / imperial choice.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±  (3% of measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1
• Incl. ISO Calibration Certificate

The Temperature Meter is a highly accurate 1-channel temperature measuring device. The Temperature Meter is ideally suited to operate various PT-100 sensors and thus for condition monitoring. By using four-wire technology, the response time is particularly fast and accurate.

• Measuring range: -100 … +400 °C / -148 … 752 °F
• Accuracy: ± 0.05% + 0.1 °C / 0.18 °F (at 18 to 28 °C / 64.4 … 82.4 °F) device only
• Resolution: 0.01 °C / 0.018 °F
• PT-100 sensor

The PCE-JR-911 temperature meter with Thermometer is a versatile tool in that it can measure the temperature of objects without contact and readings can be stored in memory and transferred to a computer by way of its RS-232 interface and software. This temperature meter comes complete with a Thermometer, allowing the user to program specific time intervals for taking measurements, such as over an entire week. Each temperature meter comes manufacturer calibrated and can be certified according to the ISO standards as an option.

• Temperature range: -40 to 500°C / -40 … 932°F
• Resolution: 0.1°C / 0.18°F
• Accuracy: ±2% of reading or ±2°C / 3.6°F
• Optical resolution: 8:1
• Emissivity: 0.3 to 1.0 (adjustable)
• Interface: RS-232
• Display: LCD