- Up to 15 gases
- For flammable gases
- 500 mm / 19.6" sensor
- Visual, audible and haptic alarm

- Formaldehyde in mg / m³
- Measurement of TVOC
- Temperature measurement
- Alarm function
- Mass concentration

With the environmental tester you can ensure the right climate in your office. The environmental tester measures the CO2 content of the air, the relative humidity and the room temperature. The environmental tester shows carbon dioxide concentrations up to 9999 ppm, temperatures from -10… 50 °C, and relative humidity values from 20… 95%.

- Large CO2 measuring range up to 9999 ppm
- Traffic light function for carbon dioxide
- Measures temperature and humidity
- Network operation
- Suitable for classrooms, offices, lecture halls

- Large CO2 measuring range up to 5000 ppm
- Traffic light function for carbon dioxide
- Measures temperature and humidity
- 5 h graph for long-term monitoring
- Battery and power adapter operation
- Suitable for classrooms, nurseries/kindergartens, lecture halls

   ozin², ftH2O, cmH2O, kgcm², bar

The PCE-THB 38 Environmental Tester is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the Environmental Tester is sent out manufacturer calibrated. An ISO certification is available optionally.

- HCHO measuring range: 0.00 … 5.00 mg/m³
- TVOC measuring range: 0.00 … 9.99 mg/m³
- Temperature measuring range: 0 … 50 °C / 32 … 122 °F
- Humidity measuring range: 0 … 100% RH
- Memory for 5000 measuring points
- Battery and mains operation

- Infrared measuring range: -35 ... 330°C / -31 ... 626°F
- Type of measurement puncture sensor measuring range: -20 ... 260°C / -4 ... 500°F
- Measurement spot ratio: 4: 1
- For frozen, cold and hot foods
- Incl. ISO calibration certificate

- Measuring range PM2.5: 0 ... 500 μg / m³
- Measuring range temperature: -10 ... 50°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Pictograms indicate air quality
- Battery operation
- Micro USB for charging

- Air temperature: -20 ... 60 °C / -4 ... 140 °F
- Humidity: 0 … 100% RH
- Wet bulb temperature, dew point
- Data memory for 32,000 readings
- Type K thermocouple

- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67
- Incl. ISO calibration certificate

The environmental tester is a handheld digital device to measure temperature in the HVAC sector, as for instance in heating ducts, air conditioning vents, insulation, crawl spaces, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The environmental tester is very easy to use, with small dimensions and short response time.

- Measuring range:  -40 ... 250°C / -40 ... 482°F
- Indication of max. and min. values
- Data function
- Lock for continuous operation
- Measured value in ºC or ºF
- incl. ISO-Calibration Cerificate

This environmental tester with outside sensor is a real all-rounder. The wireless environmental tester with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless environmental tester and outside sensors. The weather data of the environmental tester with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.

- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...