Industrial Measurement Products and Solutions
Order no.: PCE-EM 30

PCE-EM 30 is a digital portable 3-axis environmental electromagnetic radiation tester or EMF detector used to measure electromagnetic radiation generated by electronic devices and electric installations. This triple-axis EMF meter provides greater precision than single-axis models as well as affords the ability to assess EMFs from more than one source at a time.


- Measuring range: 0 to 199.99 V/m, 0 to 99.999 W/m², 0 to 9.9999 mW/cm²
- EMF bandwidth: 100 kHz to 3 GHz
- Comes with two external sensor probes (for low and high frequency ranges)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WL 1-ICA

The Environmental Tester PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use the environmental tester for mobile applications. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The Environmental Tester PCE-WL 1 helps you determine these profits.


- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- Battery life up to 3 years
- 512 MB microSD card incl.
- incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-AQD 20
The environmental tester PCE-AQD 20 is an ideal measuring device for monitoring the air quality at workplaces. The PCE-AQD 20 health and environmental tester is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WL 1

The Environmental Tester PCE-WL 1 is an ideal tool to measure and store the wind speed for a long time. The battery enables you to use the wind recorder in situ. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The wind speed meter PCE-WL1 helps you determine these profits.


- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- Battery life up to 3 years
- 512 MB microSD card incl.

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: LXT-ICA
The environmental tester consists of a measuring sensor with handle, a wall bracket with a 1.5 m / 4.9 ft cable, a light transmitter and a digital display. The main field of application of the environmental tester is the continuous light measurement and light monitoring of photo laboratories and production areas, such as food or drug production.

- Measuring range: 0 ... 50,000 lx
- Resolution: 0.1 / 1 lx
- For permanent installation
- Relay and control output
- Incl. ISO calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-330-ICA

PCE-330 is an environmental tester or hygro-thermometer with a quick-response sensor for determining ambient temperature, relative humidity and dew point temperature. Equipped with an easy-to-read dual display, this data-logging indoor air quality (IAQ) meter features a large internal memory with storage for up to 16,000 recorded values.


- Temperature range: -20 ... 60°C / -4 ... 140°F
- Relative humidity range: 0 ... 100% RH
- Resolution: 0.1° / 0.18°F
- Accuracy: ± 0.8°C / ± 1.5°F, ± 2.0 ... 4.0% RH
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WB 20SD

PCE-WB 20SD is a data-logging environmental tester used to measure indoor / outdoor wet bulb globe temperature (WBGT), black globe temperature (TG), wet bulb temperature (WB), dew point temperature, air temperature (TA) and relative humidity. Thus, this multipurpose data-recording device is an ideal tool for evaluating heat stress risks in different work environments.


- Programmable WBGT alarm setting with audible and visual alerts
- Manual (push-button) or automatic (adjustable 1 ... 3600 sec) sampling
- SD card memory (1 ... 16 GB) allows for quick and easy data transfer to a PC

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VDL 16I
The environmental tester PCE-VDL 16I from PCE Instruments measures and stores the relevant measured variables: temperature, relative humidity, air pressure, light as well as acceleration in three axes by means of a vibration sensor. Therefore, this environmental tester is ideal for monitoring vibrations on machines while simultaneously measuring and recording the relevant environmental conditions of the system.

- 3-Axis acceleration up to 800 Hz
- 32 GB SD memory card
- Evaluation software
- Small design: 86.8 x 44.1 x 22.2 mm / 3.4 x 1.7 x 0.87 in
Temperature, Humidity, Air pressure, Vibration, and Light

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-WSAC 50

PCE-WSAC 50 is an environmental tester alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. This environmental tester alarm controller allows measurement of the slightest of wind movements. PCE-WSAC 50 is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing.


- Pre-alarm and full alarm with visual and audible warnings
- Optional RS-485 modbus interface for data communication
- Measuring range: 0 ... 50 m/s or 0 ... 110 mph
- Incl. ISO calibration certificate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MFM 3500
The electromagnetic environmental tester is a reliable measuring device for measuring the existing magnetic field. This electromagnetic environmental tester is suitable for measuring both static and alternating magnetic fields.

Measuring function:
- Measuring range up to 30,000 G
- DC Milli Tesla
- DC Gauss
- AC Milli Tesla
- AC Gauss
- Temperature
- Switchable AC / DC measurement
- Memory: Manual / Automatic
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G 2
The Environmental Tester PCE-G 2 is used to measure the environmental parameters of temperature and humidity. The environmental tester is used in warehouses, open-plan offices, schools, etc.

- Measuring range temperature: -40 ... 85 °C
- Measuring range humidity: 0 ... 99 % r.H.
- 55 mm character height
- Up to 30 m reading distance
- External sensor (wired)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RAM 10

The Environmental Tester PCE-RAM 10 measures α-, β-, γ- and X-rays and offers a high measurement accuracy and convenient design. Using the integrated Bluetooth interface in the Environmental Tester, the measured values can be sent in real time to a PC and analyzed with the included software.


- Α-, β-, γ- and X-rays
- Bluetooth interface
- Internal memory
- Software Included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 300
The environmental tester PCE-HT 300 is a laboratory data logger for temperature, dew point and humidity. The environmental tester stores the measurement data on an internal 16 GB memory in CSV format. 

Measuring function
- Temperature: -10 ... 80°C / 14 ... 176°F
- Dew point: -10 ... 80°C / 14 ... 176°F
- Humidity: 0 ... 100% RH
- 16 GB of memory
- Storage as CSV
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: LXT-TRM-ICA

The environmental tester consists of a measuring sensor with handle, a wall bracket with a 1.5 m / 4.9 ft cable, and a light transmitter. The main field of application of the light meter is the continuous light measurement and light monitoring of photo laboratories and production areas, such as food or drug production.  

 

- Measuring range: 0 ... 50,000 lux in three ranges
- Resolution: 0.1 lx / 1 lx
- Accuracy: ± 5% of the reading
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-228LIQ-ICA
The environmental tester PCE-228LIQ-ICA is a very easy-to-use pH / mV / °C / °F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred directly from the environmental tester to a PC via the RS-232 interface. You can buy the environmental tester PCE-228LIQ-ICA here in our shop.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Especially for beer, blood, milk products
- Incl. ISO calibration 
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-228SLUR-ICA
The environmental tester PCE-228SLUR-ICA is a very easy-to-use pH / mV / °C / °F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred directly from the environmental tester to a PC via the RS-232 interface. You can buy the environmental tester PCE-228SLUR-ICA here in our shop.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Especially for measurements in mud and earth
- Incl. ISO calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 12
The environmental tester PCE-RCM 12 is used for indicative testing of environmental parameters. The environmental tester PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the environmental tester provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-172-ICA

The PCE-172 environmental tester is used for accurate measuring of brightness in the industrial sector, commercial sector, agricultural sector, and for research.


- Range: 40 ... 400,000 lux
- Accuracy: ± 5% of reading ± 10 digits (10,000 lux)
- 3.5-digit LCD display
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-AQD 10
The environmental tester PCE-AQD 10 is used to measure air quality. The environmental tester PCE-AQD measures 10 carbon dioxide, temperature and humidity. The CO2 sensor from the environmental tester is disconnected from the main unit with a connection cable.

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% rh
- Measuring range: 0 ... 50°C / 32 ... 122°F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT110-ICA

The PCE-HT110-ICA Environmental Tester or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110-ICA is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.


- Measurement ranges: 0 … 50°C / 32 ... 122°F, 10 ... 90% RH
- Resolution: 0.1°C / 0.18°F, 0.1% RH
- Data format: .XLS (compatible with Microsoft Excel)
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer