Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

 

Measuring function
- DC DC
- AC voltage AC (TRMS)
- AC + DC TRMS voltage
- DC DC
- AC AC (TRMS)
- 4 ... 20-mA %
- AC AC / Rogowski coil
- Resistance
- Frequency
- Duty cycle
- Capacity
- Temperature / thermocouple
- Interface: Bluetooth BLE

Measuring function
- DC DC
- AC voltage AC (TRMS)
- AC + DC TRMS voltage
- DC DC
- AC AC (TRMS)
- 4 ... 20-mA %
- AC AC / Rogowski coil
- Resistance
- Frequency
- Duty cycle
- Capacity
- Temperature / thermocouple

The Electrical Tester tests 12V and 24V starter batteries. The vehicle battery tester checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling. 

 

- Measurement object:  12V / 24V starter batteries

- Battery standards: DIN, JIS, EN, SAE

- Power supply: 9 ... 35V DC via test voltage

Measurement function:
- AC
- DC
- DC voltage
- AC voltage
- LowZ AC / DC
- Resistance
- Continuity test
- Diode test
- Capacities
- Temperature (type K)
- Frequency (with the current clamp)
- Frequency (during voltage measurement)
- frequency (direct measurement)
- Duty cycle

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation

The PCE-DC1 Electrical tester has been designed to detect, indirectly, AC/DC current and frequency. The Electrical tester has a flashlight integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.

- AC current (50/60 Hz): 200 A / 0.1 A or 100-mA / ±3.0% + 8 digits
- DC current: 200 A / 0.1 A or 100-mA / ±2.8% + 8 digits
- AC test voltage (without contact):100 VAC to 600 VAC 50 / 60 Hz
- Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

 

Measuring function:
- DC voltage
- AC voltage
- Alternating current
- Resistance
- Capacity
- Frequency
- Type K temperature measurement
- Diode test
- Continuity test

- For 12V starter batteries
- Cold start current CCA:  100 ... 1700 A
- Battery capacity:  30 Ah ... 100 Ah
- Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

- CAT III 600V
- Bluetooth interface
- DC and AC voltage
- DC and AC
- Resistance
- TRMS (50 ... 400 Hz)
- Capacity
- Temperature (type K thermocouple)
- Frequency

The handy electrical tester PCE-HDM 5 is ideally suited for beginners in electrical engineering. Due to its small dimensions, the PCE-HDM 5 electrical tester can fit in any drawer or in the glove compartment of a car. Both AC voltage and current as well as DC voltage and current can be measured with the PCE-HDM 5 electrical tester. The resistance measurement, the diode test and the continuity test are also part of the functionality of the PCE-HDM 5.

- CAT III 600V
- Bluetooth interface
- DC and AC voltage
- DC and AC
- Resistance
- Diode test
- TRMS (50/60 Hz)
- Capacity
- Temperature (type K thermocouple)
- Operating conditions 5 ... 40°C / 41 ... 104°F, max. 80% rh
- Frequency

Measuring function
- Voltage measurement DC
- Voltage measurement AC
- Resistance
- Capacity
- Current measurement DC
- Temperature measurement (K-type)
- Overvoltage protection

Measuring function:
- DC voltage
- AC voltage
- Capacity
- Transistor test
- Direct current
- Alternating current
- Resistance
- Diode test
- Continuity test
- Function generation

 

Measuring function:
- DC voltage
- AC voltage
- Direct current
- Alternating current
- Capacity
- Frequency
- Type K temperature
- Diode test
- Continuity test