Industrial Measurement Products and Solutions
Order no.: CA-C113

The Current Clamp from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Current Clamp can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Current Clamp via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 10 mA ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in plug

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-Y3N

The Y-Series Current Clamp Adapter is designed to be used with multimeters or oscilloscopes and can measure up to 600 A, with a maximum enclosure diameter of 30 mm (1.2 in). his universally applicable Current Clamp Adapter does not need its own power supply, just connect the instrument with the test leads to the meter, removing the need to worry about the battery charge. The Current Clamp Adapter comes manufacturer calibrated.
- Measuring range: 4 A ... 600 A AC
- Accuracy: 3%
- Transformer ratio (E:A): 100 : 1

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C112

The Current Clamp from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Current Clamp can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Current Clamp via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 10 mA ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in sockets

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-E3N

The CA-E Series Current Clamp for multimeters and oscilloscopes is a small current transformer with a clamp diameter of 8 mm (0.3 in) with a measuring range of 5 mA to a maximum of 150 A and a frequency range of up to 100 kHz.
- Measuring range: 0.05 A ... 100 A AC / DC
- Conversion ratio: 1 A / 10 mV
- BNC connector

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C107

The Current Clamp from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Current Clamp can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Current Clamp via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in plug
- Output: AC voltage

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C122

The Current Clamp from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Current Clamp can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Current Clamp via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 1 A ... 1000 A
- Transformer Ratio: 1000 / 5
- Connection: 4 mm / 0.2 in sockets

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer
Order no.: CA-C106

The Current Clamp from the C1XX series for multimeters has a diameter of 52 mm (2.0 in), maximum 1000 A AC, and is designed for power and harmonics measurement. The Current Clamp can be connected via 4 mm (0.2 in) safety plugs to a multimeter. It is also possible to connect the Current Clamp via the 4 mm (0.2 mm) sockets or the BNC connector to a data acquisition system. The test instrument comes manufacturer calibrated. As all instruments, it can be certified to ISO as an option.
- Measuring range: 0.1 A ... 1000 A
- Transformer Ratio: 1000 / 1
- Connection: 4 mm / 0.2 in socket
- Output: AC voltage

Manufacturer: Chauvin Arnoux GmbH
Test Instruments manufacturer