PCE-PCO 2 is a portable handheld air quality particle counting meter or particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature, dew point and relative humidity.

- PM channels: PM 2.5, PM 10, including mass concentration mode (µg/m³)
- Particle sizes (in micrometers): 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
- Temp. measuring range: 0 ... +50 °C / +32 ... +122 °F
- Humidity measuring range: 0 ... 100 % RH
- Built-in camera for image and video recording
- Free software download on PCE Software web page

This Air Quality Meter Gas-Pro-1 can gauge with its sensors a maximum of four different gases. Because of this versatility, the Air Quality Meter Gas-Pro-1 is ideal for use in a variety of applications, such as: near canals, sewage treatment plants, drains, wastewater facilities, dumps/landfills, chemical/oil plants, shipping ports and more.

- Purpose: Personal protection
- Sensor type: CO / H2S / O2 / CH4
- Memory: Yes
- Interface: USB
- Includes suction pump
- Other gas sensors available upon request. (Please email jmu@pce-instruments.com (UK) or jwe@pce-instruments.com (US) for details!)

 

The air quality temperature humidity meter is a measuring device for stationary measurement of relative humidity and temperature. This air quality temperature humidity meter consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
- Voltage supply: 230 V AC
- with analogue output 4 ... 20 mA

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)

The air quality meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the air quality meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

- Measurable particle sizes: PM2.5 / PM10
- Particle sizes: 0.3 / 0.5 / 1.0 / 2.5 / 5.0 and 10 µm
- Mass concentration
- Particle counter
- Temperature
- Humidity (RH)
- Flash memory for approx. 12 measurement runs

This Air Quality Meter is designed to detect formaldehyde in air. The Air Quality Meter shows the formaldehyde-concentration on site and thereby avoids time-consuming and expensive analysis in laboratories. The formaldehyde Air Quality Meter runs with the help of an electromechanical sensor and is designed to determine the current permitted limit.

- Measuring range: 0 … 10 ppm
- Short reaction time
- Real-time display
- Manual and auto data storage
- High-speed USB
- Software for Online Data transfer

PCE-PCO 1 is a handheld particle-counting air quality meter or dust measuring device for measuring the concentration of particles in the air. The PCE-PCO 1 hygienic dust measuring device:

- Measures 6 sizes of particles: 0.3 µm, 0.5 µm, 1.0 µm, 2.5 µm, 5.0 µm, 10 µm
- Offers a robust, 80 MB internal memory
- Features a large, full-color LCD display with backlight
- Includes a built-in camera for image and video recording
- Contains sensors for measuring air temperature, dew point and relative
  humidity
- Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)

The Air Quality Meter Gasman-PH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.

 
- Non-rechargeable, 1-year battery
- For PH₃ (Phosphine)
- Dust and water resistant - IP 65/67
- 0 ... 5 ppm

 

The Air Quality Carbon Dioxide Meter PCE-WMM 100-ICA consists of a main unit and a remote display. The air quality carbon dioxide meter is used to measure carbon dioxide and oxygen in a fixed location. The air quality carbon dioxide meter has two relays that can be used to control alarm lights or sounders.

- Measuring range CO2: 0 .... 50000 ppm
- Measuring range O2: 0 ... 30 %
- Measuring range temperature: 0 ... 50 °C / 32 ... 122 °F
- Main and remote unit
- Alarm relay
- 4 ... 20 mA analog outputs
- Acoustic alarm
- incl. ISO Calibration Certificate

The Air Quality Meter Gasman-NH3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For NH₃ (Ammonia Gas)
- Dust and water resistant - IP 65/67
- 0 ... 100 ppm

 

The Air Quality Meter Gasman-O3 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.

- For O3 (Ozone)
- Dust and water resistant - IP 65/67
- 0 ... 1 ppm
- Non-rechargeable, 1-year battery

 

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate

- Measurable particle sizes: PM2.5 / PM10
- Measuring range Mass concentration: 0 ... 2000 μg / m³
- Measurable particle sizes: 0.3, 2.5 and 10 μm
- Display with graphic real-time diagram
- Data memory up to 5000 data sets

The air quality carbon dioxide meter PCE-WMM 100 consists of a main unit and a remote display. The CO2 air quality meter PCE-WMM 100 is used to measure carbon dioxide and oxygen in a fixed location. The air quality carbon dioxide meter PCE-WMM 100 has two relays that can be used to control alarm lights or sounders.

- Measuring range CO2: 0 .... 50000 ppm
- Measuring range O2: 0 ... 30 %
- Measuring range temperature: 0 ... 50 °C / 32 ... 122 °F
- Main and remote unit
- Alarm relay
- 4 ... 20 mA analog outputs
- Acoustic alarm

The Air Quality Meter Gasman-NO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For NO₂ (Nitrogen Dioxide)
- Dust and water resistant - IP 65/67
- 0 ... 10 ppm

 

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function

The Air Quality Meter Gasman-H2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Air Quality Meter warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Air Quality Meter fulfills all the European and international norms, even ATEX and UL standards.

- Non-rechargeable, 1-year battery
- For H₂ (Hydrogen)
- Dust and water resistant - IP 65/67
- 0... 1000 ppm