Order no.: HOMMEL ETAMIC W20

The Hommel-Etamic W20 skidless probe system has been designed specifically for mobile roughness measurement. It not only measures all common roughness parameters, but also evaluates the waviness and total profile of your surface. The measuring instrument is particularly compact and portable.


- Measurement range: ±300 µm
- Resolution: 12 nm*
- Total deviation according to DIN 4772: Class 1 

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer
Order no.: HOMMEL ETAMIC W20

The Hommel-Etamic W20 skidless probe system has been designed specifically for mobile roughness measurement. It not only measures all common roughness parameters, but also evaluates the waviness and total profile of your surface. The measuring instrument is particularly compact and portable.


- Measurement range: ±300 µm
- Resolution: 12 nm*
- Total deviation according to DIN 4772: Class 1 

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer
Order no.: IPR Basic3

The fully automatic process digital refractometer IPR Basic3 continuously measures the refractive index and thus the concentration of solids in solutions or the mixing ratios of binary or quasi-binary liquid mixtures. The measurement is independent of process air, turbidity, colour of the process solution and the light intensity of the LED.


- Measuring range: 1.32000 – 1.52000 nD 0 – 90 Brix
- Resolution: 0.00001 nD 0.01 Brix
- Accuracy: ±0.00014 nD ±0.1 Brix (at 20 °C / 68 °F)
- IP69K protection TÜV tested

Manufacturer: SCHMIDT + HAENSCH
Test Instruments manufacturer
Order no.: PCE-PIC 60
The condition monitoring inspection camera PCE-PIC 60 is used to inspect channels and pipes. The condition monitoring inspection camera has a fiber optic push cable of 60 m. At the end of the condition monitoring inspection camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 60
The drain camera PCE-PIC 60 is used to inspect channels and pipes. The drain camera has a fiber optic push cable of 60 m. At the end of the drain camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 60
The HVAC meter PCE-PIC 60 is used to inspect channels and pipes. The HVAC meter has a fiber optic push cable of 60 m. At the end of the HVAC meter, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 60
The industrial borescope PCE-PIC 60 is used to inspect channels and pipes. The industrial borescope has a fiber optic push cable of 60 m. At the end of the industrial borescope, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 60
The inspection camera PCE-PIC 60 is used to inspect channels and pipes. The inspection camera has a fiber optic push cable of 60 m. At the end of the inspection camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 60
The NDT tester inspection camera PCE-PIC 60 is used to inspect channels and pipes. The NDT tester inspection camera has a fiber optic push cable of 60 m. At the end of the NDT tester inspection camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 60
The videoscope PCE-PIC 60 is used to inspect channels and pipes. The videoscope has a fiber optic push cable of 60 m. At the end of the videoscope, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable cars
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 20

The easy-to-use PCE-MSV 20 condition monitoring sound level meter visualizes sound in real time, and therefore pinpoints the source of a sound. The lightweight PCE-MSV 20 class 2 condition monitoring sound level meter can be used in many different applications in manufacturing and engineering. Recorded images and videos can be transferred via a WLAN to a computer for further analysis. When using the included sound measuring microphone, the PCE-MSV 20 also can be used as a general sound level meter without visualization.


- Measuring range: 30 ... 130 dB A
- 7 Band frequency filters
- Frequency range: 160 … 6000 Hz
- Real-time image recording
- Several measuring microphones
- For visual sound detection

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 20

The easy-to-use PCE-MSV 20 decibel meter visualizes sound in real time, and therefore pinpoints the source of a sound. The lightweight PCE-MSV 20 class 2 decibel meter can be used in many different applications in manufacturing and engineering. Recorded images and videos can be transferred via a WLAN to a computer for further analysis. When using the included sound measuring microphone, the PCE-MSV 20 also can be used as a general decibel meter without visualization.


- Measuring range: 30 ... 130 dB A
- 7 Band frequency filters
- Frequency range: 160 … 6000 Hz
- Real-time image recording
- Several measuring microphones
- For visual sound detection

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 20

The easy-to-use PCE-MSV 20 noise meter / sound meter visualizes sound in real time, and therefore pinpoints the source of a sound. The lightweight PCE-MSV 20 class 2 noise meter / sound meter can be used in many different applications in manufacturing and engineering. Recorded images and videos can be transferred via a WLAN to a computer for further analysis. When using the included sound measuring microphone, the PCE-MSV 20 also can be used as a general noise meter / sound meter without visualization.


- Measuring range: 30 ... 130 dB A
- 7 Band frequency filters
- Frequency range: 160 … 6000 Hz
- Real-time image recording
- Several measuring microphones
- For visual sound detection

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 20

The easy-to-use PCE-MSV 20 sound level meter visualizes sound in real time, and therefore pinpoints the source of a sound. The lightweight PCE-MSV 20 class 2 sound level meter can be used in many different applications in manufacturing and engineering. Recorded images and videos can be transferred via a WLAN to a computer for further analysis. When using the included sound measuring microphone, the PCE-MSV 20 also can be used as a general sound level meter without visualization.


- Class 2
- Measuring range: 30 ... 130 dB A
- 7 Band frequency filters
- Frequency range: 160 … 6000 Hz
- Frequency weighting: A and linear
- Real-time image recording
- Several measuring microphones
- For visual sound detection

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 20

The easy-to-use PCE-MSV 20 SPL meter visualizes sound in real time, and therefore pinpoints the source of a sound. The lightweight PCE-MSV 20 class 2 SPL meter can be used in many different applications in manufacturing and engineering. Recorded images and videos can be transferred via a WLAN to a computer for further analysis. When using the included sound measuring microphone, the PCE-MSV 20 also can be used as a general SPL meter without visualization.


- Measuring range: 30 ... 130 dB A
- 7 Band frequency filters
- Frequency range: 160 … 6000 Hz
- Real-time image recording
- Several measuring microphones
- For visual sound detection

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: 220300

This process viscometer (also know as an in-line viscometer, on-line viscometer or in-process viscometer) is a rotating viscometer for use on the production line. The RM 100 L Touch viscometer is ideal for measuring the viscosity of chemical and petroleum products, cosmetics and pharmaceuticals, food products, building materials, paint, ink and coatings. PT 100 temp sensor input, 7-inch touchscreen and RS 232 and USB ports. Control box can be up to 15 m/ 49 ft from the measuring head.


- Rotational speed: Unlimited number of speeds between 5 ... 600 rpm
- Viscosity range: 1 ... 500,000 mPa.s / cP
- Accuracy: ±1 % full scale (FS)
- Analog output signal 4 ... 20 mA
- 7" touchscreen

 

Manufacturer: LAMYRHEOLOGY
Test Instruments manufacturer
Order no.: PCE-VE 800N4
The condition monitoring inspection camera has a 1.5 m / 4.9 ft long endoscope cable. With a diameter of only 2.8 mm, cavities with the smallest access can be viewed with the help of this condition monitoring inspection camera. The camera head of this condition monitoring inspection camera can move freely in 4 directions.

- Cable / head diameter: 2.8 mm
- Direction of movement camera head: 4-way
- Camera head length: 8 mm
- Bending radius: 7 mm
- 1.5 m / 4.9 ft endoscope cable
- 5" monitor
- Image and video memory
- IP 58 camera cable
- 400 x 400 pixel image resolution
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 800N4
The industrial borescope has a 1.5 m / 4.9 ft long endoscope cable. With a diameter of only 2.8 mm, cavities with the smallest access can be viewed with the help of this industrial borescope. The camera head of this industrial borescope can move freely in 4 directions.

- Cable / head diameter: 2.8 mm
- Direction of movement camera head: 4-way
- Camera head length: 8 mm
- Bending radius: 7 mm
- 1.5 m / 4.9 ft endoscope cable
- 5" monitor
- Image and video memory
- IP 58 camera cable
- 400 x 400 pixel image resolution
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 800N4
The inspection camera has a 1.5 m / 4.9 ft long endoscope cable. With a diameter of only 2.8 mm, cavities with the smallest access can be viewed with the help of this inspection camera. The camera head of this inspection camera can move freely in 4 directions.

- Cable / head diameter: 2.8 mm
- Direction of movement camera head: 4-way
- Camera head length: 8 mm
- Bending radius: 7 mm
- 1.5 m / 4.9 ft endoscope cable
- 5" monitor
- Image and video memory
- IP 58 camera cable
- 400 x 400 pixel image resolution
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 800N4
The snake camera has a 1.5 m / 4.9 ft long endoscope cable. With a diameter of only 2.8 mm, cavities with the smallest access can be viewed with the help of this snake camera. The camera head of this snake camera can move freely in 4 directions.

- Cable / head diameter: 2.8 mm
- Direction of movement camera head: 4-way
- Camera head length: 8 mm
- Bending radius: 7 mm
- 1.5 m / 4.9 ft endoscope cable
- 5" monitor
- Image and video memory
- IP 58 camera cable
- 400 x 400 pixel image resolution
Manufacturer: PCE Instruments
Test Instruments manufacturer