Order no.: PCE-MSV 30

The mobile condition monitoring sound level meter PCE-MSV 30 is used for sound detection in real-time, creating a visual map to a sound’s source. The PCE-MSV 30 class 2 condition monitoring sound level meter is used for pinpointing the source of sound in all stages of production, engineering and research. The condition monitoring sound level meter PCE-MSV 30 also has a threshold level measurement. Here, a limit value can be set in the settings and the measuring device records a sound image when the limit value is exceeded.

 

- Measuring range: 30 ... 130 dB A
- 7 Band frequency filters
- Limit measurement function
- Frequency range: 160 … 6000 Hz
- Real-time image recording
- Several measuring microphones
- For visual sound detection

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 30

The mobile decibel meter PCE-MSV 30 is used for sound detection in real-time, creating a visual map to a sound’s source. The PCE-MSV 30 class 2 decibel meter is used for pinpointing the source of sound in all stages of production, engineering and research. The decibel meter PCE-MSV 30 also has a threshold level measurement. Here, a limit value can be set in the settings and the measuring device records a sound image when the limit value is exceeded. 

- Measuring range: 30 ... 130 dB A
- 7 Band frequency filters
- Limit measurement function
- Frequency range: 160 … 6000 Hz
- Real-time image recording
- Several measuring microphones
- For visual sound detection

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 30

The easy-to-use PCE-MSV 30 noise meter / sound meter visualizes sound in real time, and therefore pinpoints the source of a sound. The lightweight PCE-MSV 30 class 2 noise meter / sound meter can be used in many different applications in manufacturing and engineering. Recorded images and videos can be transferred via a WLAN to a computer for further analysis. When using the included sound measuring microphone, the PCE-MSV 30 also can be used as a general noise meter / sound meter without visualization. 

- Measuring range: 30 ... 130 dB A
- 7 Band frequency filters
- Limit measurement function
- Frequency range: 160 … 6000 Hz
- Real-time image recording
- Several measuring microphones
- For visual sound detection

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 30

The mobile sound level meter PCE-MSV 30 is used for sound detection in real-time, creating a visual map to a sound’s source. The PCE-MSV 30 class 2 sound level meter is used for pinpointing the source of sound in all stages of production, engineering and research. The sound level meter PCE-MSV 30 also has a threshold level measurement. Here, a limit value can be set in the settings and the measuring device records a sound image when the limit value is exceeded. 

- Class 2
- Measuring range: 30 ... 130 dB A
- 7 Band frequency filters
- Limit measurement function
- Frequency range: 160 … 6000 Hz
- Frequency weighting: A and linear
- Real-time image recording
- Several measuring microphones
- For visual sound detection

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MSV 30

The mobile SPL meter PCE-MSV 30 is used for sound detection in real-time, creating a visual map to a sound’s source. The PCE-MSV 30 class 2 SPL meter is used for pinpointing the source of sound in all stages of production, engineering and research. The SPL meter PCE-MSV 30 also has a threshold level measurement. Here, a limit value can be set in the settings and the measuring device records a sound image when the limit value is exceeded. 

- Measuring range: 30 ... 130 dB A
- 7 Band frequency filters
- Limit measurement function
- Frequency range: 160 … 6000 Hz
- Real-time image recording
- Several measuring microphones
- For visual sound detection

Manufacturer: ACB Engineering
Test Instruments manufacturer
Order no.: iPR HR²
The automatically operating digital process refractometer iPR HR² (High Resolution) measures the refractive index continuously and thus, the concentration of a binary or quasi-binary liquid mixture. They are especially developed for the checking of liquids with very low solid concentrations (e.g., Light drinks). The iPR HR² has a very high resolution and precision.

- Measuring range: 1.3320 - 1.3720 / 0 - 25 Brix 
- Resolution: 0.000005 nD / 0.002 Brix
- Accuracy: ±0.00004 nD, ±0.02 Brix
- Suitable for applications in Pharmacy, Nutraceuticals, Diet drinks, and Salinity
- Stainless head IP69K rated for chemicals and food

Manufacturer: SCHMIDT + HAENSCH
Test Instruments manufacturer
Order no.: iPR FR²
In-line process digital refractometer iPR FR² with extremely short reaction time for continuous measurement and real-time process control with an analogue data output. It is characterized by minimal size and weight and has an excellent price-performance ratio.


- Measuring range: B1: 1.3320 - 1.5300 / 0 - 100 Brix
- Resolution: 0.00001 nD 0.01 Brix
- Accuracy: ± 0.00007 nD ±0.05 Brix (at 20 °C / 68 °F)
- Explosion-proof version: ATEX Class Ex II 1G Ex ia II C T4

Manufacturer: SCHMIDT + HAENSCH
Test Instruments manufacturer
Order no.: PCE-PIC 120
The condition monitoring inspection camera PCE-PIC 120 is used to inspect channels and pipes. The condition monitoring inspection camera has a fiber optic push cable of 120 m / 393.7 ft. At the end of the condition monitoring inspection camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter: 60 mm / 2.4 in
- Cable length: 120 m / 393.7 ft
- Pipe diameter from & to: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 120
The drain camera is used to inspect waste water channels and pipes. This drain camera has a fiber optic push cable of 120 m / 393.7 ft. At the end of the drain camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter: 60 mm / 2.4 in
- Cable length: 120 m / 393.7 ft
- Pipe diameter from & to: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 120
The sewer inspection camera is used to inspect waste water channels and pipes. This sewer inspection camera has a fiber optic push cable of 120 m / 393.7 ft. At the end of the inspection camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter: 60 mm / 2.4 in
- Cable length: 120 m / 393.7 ft
- Pipe diameter from & to: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable cars
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 120
The HVAC meter PCE-PIC 120 is used to inspect channels and pipes. The HVAC meter has a fiber optic push cable of 120 m / 393.7 ft. At the end of the HVAC meter, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter: 60 mm / 2.4 in
- Cable length: 120 m / 393.7 ft
- Pipe diameter from & to: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 120
The industrial borescope PCE-PIC 120 is used to inspect channels and pipes. The industrial borescope has a fiber optic push cable of 120 m / 393.7 ft. At the end of the industrial borescope, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter: 60 mm / 2.4 in
- Cable length: 120 m / 393.7 ft
- Pipe diameter from & to: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 120
The NDT tester inspection camera PCE-PIC 120 is used to inspect channels and pipes. The NDT tester inspection camera has a fiber optic push cable of 120 m / 393.7 ft. At the end of the NDT tester inspection camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter: 60 mm / 2.4 in
- Cable length: 120 m / 393.7 ft
- Pipe diameter from & to: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PIC 120
The videoscope PCE-PIC 120 is used to inspect channels and pipes. The videoscope has a fiber optic push cable of 120 m / 393.7 ft. At the end of the videoscope, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter: 60 mm / 2.4 in
- Cable length: 120 m / 393.7 ft
- Pipe diameter from & to: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: HOMMEL ETAMIC W20

The Hommel-Etamic W20 skidless probe system has been designed specifically for mobile roughness measurement. It not only measures all common roughness parameters, but also evaluates the waviness and total profile of your surface. The measuring instrument is particularly compact and portable.


- Measurement range: ±300 µm
- Resolution: 12 nm*
- Total deviation according to DIN 4772: Class 1 

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer
Order no.: HOMMEL ETAMIC W20

The Hommel-Etamic W20 skidless probe system has been designed specifically for mobile roughness measurement. It not only measures all common roughness parameters, but also evaluates the waviness and total profile of your surface. The measuring instrument is particularly compact and portable.


- Measurement range: ±300 µm
- Resolution: 12 nm*
- Total deviation according to DIN 4772: Class 1 

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer
Order no.: HOMMEL ETAMIC W20

The Hommel-Etamic W20 skidless probe system has been designed specifically for mobile roughness measurement. It not only measures all common roughness parameters, but also evaluates the waviness and total profile of your surface. The measuring instrument is particularly compact and portable.


- Measurement range: ±300 µm
- Resolution: 12 nm*
- Total deviation according to DIN 4772: Class 1 

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer
Order no.: HOMMEL ETAMIC W20

The Hommel-Etamic W20 skidless probe system has been designed specifically for mobile roughness measurement. It not only measures all common roughness parameters, but also evaluates the waviness and total profile of your surface. The measuring instrument is particularly compact and portable.


- Measurement range: ±300 µm
- Resolution: 12 nm*
- Total deviation according to DIN 4772: Class 1 

 

Manufacturer: JENOPTIK Industrial Metrology Germany GmbH
Test Instruments manufacturer
Order no.: IPR Basic3

The fully automatic process digital refractometer IPR Basic3 continuously measures the refractive index and thus the concentration of solids in solutions or the mixing ratios of binary or quasi-binary liquid mixtures. The measurement is independent of process air, turbidity, colour of the process solution and the light intensity of the LED.


- Measuring range: 1.32000 – 1.52000 nD 0 – 90 Brix
- Resolution: 0.00001 nD 0.01 Brix
- Accuracy: ±0.00014 nD ±0.1 Brix (at 20 °C / 68 °F)
- IP69K protection TÜV tested

Manufacturer: SCHMIDT + HAENSCH
Test Instruments manufacturer
Order no.: PCE-PIC 60
The condition monitoring inspection camera PCE-PIC 60 is used to inspect channels and pipes. The condition monitoring inspection camera has a fiber optic push cable of 60 m. At the end of the condition monitoring inspection camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Manufacturer: PCE Instruments
Test Instruments manufacturer