Order no.: PCE-MFI 400
The material flow tester is used for rapid testing of the melt mass flow rate of plastics. The material flow tester device is designed for both incoming goods inspection and continuous production monitoring.

- Melting rate: 0.1 to 400.0 g / 10 min
- Heating temperature: 120 ... 400°C / 248 ... 752°F
- Measuring accuracy temperature: ± 0.2°C / 0.36°F
- Resolution: 0.1°C / 0.18°F
- Large 7" TFT touch display
- Already pre-set materials
- Various weights included
- Standards: ISO1133-1997, ASTM 1238-04C, GB / T3682-2000
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 800

PCE-VE 800 is a handheld articulating condition monitoring borescope inspection camera with video recording and image capture functionality. Equipped with adjustable built-in LED lighting on the waterproof camera tip, the PCE-VE 800 condition monitoring  inspection camera features a high interpolated resolution of 200,000 pixels and a large integrated 4.3" LCD for easy viewing and navigation.

 

- Flexible cable with 4-way articulating tip
- 1.5 m / 4.9 ft cable length
- 2.8 mm / 0.11 in cable diameter

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 800

PCE-VE 800 is a handheld articulating borescope inspection camera with video recording and image capture functionality. Equipped with adjustable built-in LED lighting on the waterproof camera tip, the PCE-VE 800 borescope features a high interpolated resolution of 200,000 pixels and a large integrated 4.3" LCD for easy viewing and navigation.

 

- Flexible cable with 4-way articulating tip
- 1.5 m / 4.9 ft cable length
- 2.8 mm / 0.11 in cable diameter

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 800

PCE-VE 800 is a handheld articulating borescope inspection camera with video recording and image capture functionality. Equipped with adjustable built-in LED lighting on the waterproof camera tip, the PCE-VE 800 inspection camera features a high interpolated resolution of 200,000 pixels and a large integrated 4.3" LCD for easy viewing and navigation.

 

- Flexible cable with 4-way articulating tip
- 1.5 m / 4.9 ft cable length
- 2.8 mm / 0.11 in cable diameter

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VE 800

PCE-VE 800 is a handheld articulating videoscope inspection camera with video recording and image capture functionality. Equipped with adjustable built-in LED lighting on the waterproof camera tip, the PCE-VE 800 video borescope features a high interpolated resolution of 200,000 pixels and a large integrated 4.3" LCD for easy viewing and navigation.

 

- Flexible cable with 4-way articulating camera tip
- 1.5 m / 4.9 ft cable length
- 2.8 mm / 0.11 in camera cable diameter

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: MLE-F 10

The MLE-F Series Force Gauge is used for the non-legal weighing of machines, containers, or similar standing loads. An estimation of the location of the center of gravity is also possible. The mobile Force Gauge can be used separately for load measuring. The Force Gauge consists of a power pressure sensor and strain gauge. The test instrument is delivered manufacturer calibrated and can additionally be certified to ISO standards.


- Measurement area: 4 x 10 t
- Surface pressure per track line: 20 N/mm² for 10 t
- Maximum angle: 3 mm/m
- Maximum load: 150 %

 

Manufacturer: A.S.T. Angewandte System-Technik GmbH
Test Instruments manufacturer
Order no.: PCE-PQC 35EU
The particle counter PCE-PQC 35EU is the most advanced particle counter on the market. This particle counter PCE-PQC 35EU stores up to 45,000 measured values ​​with time stamp.

- Measuring range: 0.3 ... 25 μm
- Measurement channel sizes: 0.3, 0.5, 1.0, 2.5, 5.0, 10.0 μm
- Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
- Interface: Ethernet, USB
- Includes high-quality PID (Photo Ionization Detector) sensor
- Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 220

Moisture sensor for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture sensor for liquid materials has a processing unit with RS232/RS485 interfaces.


- Measurement range: 0 ... 100 %
- Temperature range: +5 ... +80 °C  (+41 ... +176 °F)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 220

Moisture analyzers for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture analyzer for liquid materials has a processing unit with RS232/RS485 interfaces.


- Measurement range: 0 ... 100 %
- Limits of permissible absolute error of the measurements: Δ= 0,035 +0,05·W
- Temperature measurement range: -40 ... +150 °C

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 220

Moisture meter for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture meter for liquid materials has a processing unit with RS232/RS485 interfaces.


- Measurement range: 0 ... 100 %
- Limits of permissible absolute error of the measurements: Δ= 0,035 +0,05·W
- Temperature measurement range: -40 ... +150 °C

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 220

Moisture sensor for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture sensor for liquid materials has a processing unit with RS232/RS485 interfaces.


- Measurement range: 0 ... 100 %
- Limits of permissible absolute error of the measurements: Δ = 0,035 +0,05·W
- Temperature measurement range: -40 ... +150 °C

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 220

Moisture analyzer for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture Analyzer for liquid materials has a processing unit with RS232/RS485 interfaces.

- Measurement range: 0 ... 100 % moisture in pumped liquids
- Absolute error of the measurement: Δ= 0,035 +0,05·W
- Temperature measurement range: -40 ... +150 °C

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 240-B

Suitable for determining the humidity of bulk substances, this absolute moisture sensor can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.

- PCE-MWM 240-B Rod sensor (custom length 500 ... 1500 mm)

- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 240-B

Suitable for determining the humidity of bulk substances, this bulk material moisture analyser can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.

- PCE-MWM 240-B Rod sensor (custom length 500 ... 1500 mm)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 240-B

Suitable for determining the humidity of bulk substances, this in-process moisture meter for bulk materials can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.

- PCE-MWM 240-B Rod sensor (custom length 500 ... 1500 mm)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 240-B

Suitable for determining the humidity of bulk substances, this moisture sensor can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances.

- PCE-MWM 240-B Rod sensor (custom length 500 ... 1500 mm)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-MWM 240-B

Suitable for determining the humidity of bulk substances, this moisture test instrument can be fitted into containers and systems such as troughs, bunkers, distributors, augers, conveyors, bins and silos. This permits 24/7 moisture measurement of fibrous materials, sawdust, gravel, fly ash (mineral), wood chips (surface to 5 cm) feed grain, flour, pastes, seed, or similar bulk or flowing substances. These test instruments / test sensors are mainly for use in manufacturing processes to give the opportunity of process optimization to the manufacturer or to insure the moisture content of the final product.

- PCE-MWM 240-B Rod sensor (custom length 500 ... 1500 mm)
- Lab analysis of your sample determines % error
- Measuring range: 0 ... 100%
- Material temperature range: -0 ... +80 °C  (+41 ... +176 °F)
- Analog and digital signal output

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: iPR-C2 S

Compact in-line refractometer iPR-C2 S with extremely short reaction time for continuous measurement and real-time process control with an analogue data output. It is characterized by minimal size and weight and has an excellent price-performance ratio.

- Process temperature (max.): Stainless steel: +80 °C / 176 °F
- Measuring range: 1.3320 - 1.4209 nD 0 - 50 Brix
- Resolution: 0.0001 nD 0.05 Brix
- Accuracy: ± 0.0002 nD ±0.15 Brix (at 20 °C / 68 °F)
- Select connecting flange appropriately!

Manufacturer: SCHMIDT + HAENSCH
Test Instruments manufacturer
Order no.: MLE-F 5

The MLE-F Series Force Gauge is used for the non-legal weighing of machines, containers, or similar standing loads. An estimation of the location of the center of gravity is also possible. The mobile Force Gauge can be used separately for load measuring. The Force Gauge consists of a power pressure sensor and strain gauge. The test instrument is delivered manufacturer calibrated and can additionally be certified to ISO standards.


- Measurement area: 4 x 10 t
- Surface pressure per track line: 20 N/mm² for 10 t
- Maximum angle: 3 mm/m
- Maximum load: 150 %

 

Manufacturer: A.S.T. Angewandte System-Technik GmbH
Test Instruments manufacturer
Order no.: PCE-CSM 22
PCE-CSM 22 is a handheld spectrophotometer color meter used for high-quality color measurement. Featuring a dual aperture 8 mm and 4 mm, and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 22 offers a long battery life, a 18-color lamp with UV light, and an easy-to-use portable design. The PCE-CSM 22 covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- Bluetooth 4.0 and USB cable for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Illuminant: D65, A, C, D50, D55, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12
- Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB
- Combined LED and UV light
Manufacturer: PCE Instruments
Test Instruments manufacturer