The automotive tester PCE-VE 390N is the ideal snake videoscope or inspection camera for the analysis of buildings (walls, supports, eaves, gutters, attics, crawl spaces), plumbing (pipes, drains, sewers, wells) and heating, ventilation, air conditioning and refrigeration (HVACR) systems (ducts, furnaces, chimneys, boiler and condenser tubes). The IP68-rated cable of this inspection camera is waterproof and heavy duty, making the automotive tester well suited for use in tough environments such as construction sites and industrial installations.
- Camera head diameter: 28 mm / 1.1" - Camera cable length: 10 m / 32 ft 9" - Interface: Mini-USB 1.1 and AV out - Memory: 8 GB SD memory card (incl.) - Especially suitable for chimneys, downpipes, ventilation ducts etc.
The Automotive Tester PCE-CBA 10 can be used as a car battery tester. To test the battery, the automotive tester can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.
The Automotive Tester tests 12V and 24V starter batteries. The vehicle battery tester checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling.
The PCE-AT 5 automotive tester / handheld ignition-tachometer is a portable device used to measure revolutions per minute (rpm) in one-cylinder two-stroke and eight-cylinder four-stroke combustion engines with electric ignition starters. The PCE-AT 5 handheld automotive ignition-tachometer features an easy-to-read, backlit digital LCD display and flashlight functionality for low-light applications.
The PCE-S 41 Mechanics Stethoscope is battery powered and easy to use. This Mechanics Stethoscope can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.
- Frequency range: 100 Hz to 10 kHz - Headphones, 70 mm long sensor, 290 mm long sensor, battery, carrying case - Weight: 240 g, with battery - Dimensions: 206 mm x 50 mm x 32 mm
The automotive-testing mechanics stethoscope PCE-S 42 is designed for listening to individual machine parts. The industrial stethoscope is used to perform maintenance and repair work. The use of an industrial stethoscope thus facilitates the interception of acoustic phenomena on bearings and motors to prevent failures.
- Frequency range: 30 Hz ... 15 KHz - For preventative maintenance and servicing - Sound suppressing headphones included - Easy operation - Headphones, 70 mm long sensor, 280 mm long sensor, battery, carrying case
PCE-SG is an automotive tester or handheld refractometer used to determine the specific gravity (sg) of electrolyte solution batteries as well as the freezing point of propylene or ethylene glycol-based coolants in degrees Celsius (°C). This refractometer works well for measuring cleaning products too. The instrument also gives indication of the charge level in battery acid.
Measurement ranges: -50 ... 0 °C for coolant or antifreeze 1.15 ... 1.30 sg for battery acid -40 ... 0 °C for cleaner
The motion analysis of rotating machines is quick and easy with our automotive tester / stroboscope. The automotive tester / stroboscope is equipped with 3 high-power LEDs, collectively producing a light intensity of 11,730 Lux at 20 cm / 1000 Hz. With the automotive tester / stroboscope, you can adjust the flash frequency in both FPM and Hz. Additionally, it is compact, portable, and operates independently thanks to the built-in battery.
The motion analysis of rotating machines is quick and easy with our automotive tester / stroboscope. The automotive tester / stroboscope is equipped with 3 high-power LEDs, collectively producing a light intensity of 11,730 Lux at 20 cm / 1000 Hz. With the automotive tester / stroboscope, you can adjust the flash frequency in both FPM and Hz. Additionally, it is compact, portable, and operates independently thanks to the built-in battery.
Motion analysis of rotating machines is quick and easy with our automotive tester / stroboscope. The automotive tester / stroboscope is equipped with 3 UVA high-power LEDs, which together generate a light intensity of 202 μW/cm² at a distance of 30 cm.
Motion analysis of rotating machines is quick and easy with our automotive tester / stroboscope. The automotive tester / stroboscope is equipped with 3 high-power UVA LEDs (385 nm), which together generate a light intensity of 317 μW/cm² at a distance of 30 cm.
- Flash frequency 60 ... 300000 FPM
- Light colour: UV light (380 ... 390 nm)
- Accuracy: 0.001 %
- Digital pulse width modulation
- Phase shift - 360 ° ... + 360 °
- Quick adjustment with x2 and ÷2 button - 3 UVA high-power LEDs
The automotive tester / tachometer has a contact speed measurement. The measuring range of the contact speed measurement with the automotive tester / tachometer is 0.5 ... 99,999 RPM. In addition to the contact measurement, the speed can also be measured optically with the automotive tester / tachometer.
- Measuring range contacting: 0.5 ... 99,999 RPM
- Measuring range optical: 5 … 99,990 RPM
- Temperature measurement: Type K, PT1000
- Strobe for speed determination
- Temperature measurement in °C and °F
The automotive tester / tachometer has a contact speed measurement. The measuring range of the contact speed measurement with the automotive tester / tachometer is 0.5 ... 99,999 RPM. In addition to the contact measurement, the speed can also be measured optically with the automotive tester / tachometer.
- Measuring range contacting: 0.5 ... 99,999 RPM
- Measuring range optical: 5 … 99,990 RPM
- Temperature measurement: Type K, PT1000
- Strobe for speed determination
- Temperature measurement in °C and °F
- incl. ISO Calibration Certificate
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the automotive tester also has the option of removing the rotational contacts and measuring temperatures.
- Optical tachometer - Measuring range: 5 ... 99999 rpm - Contact tachometer - Stroboscope LED - Temperature measurement: Type K, PT 1000, Infrared
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the automotive tester also has the option of removing the rotational contacts and measuring temperatures.
- Optical tachometer - Measuring range: 5 ... 99999 rpm - Contact tachometer - Stroboscope LED - Temperature measurement: Type K, PT 1000, Infrared - LED Flash frequency: 100 ... 99990 FPM
- Temperature measurement: Type K, PT 1000
- Infrared
- Incl. ISO calibration certificate (only for the tachometer function)
The automotive tester is a multimeter with a multitude of different functions. Thus, with the automotive tester, current measurements up to 200 A AC can be carried out without contact. This current range of the automotive tester already covers a large range of current measurements.
Measurement function:
- AC
- DC
- DC voltage
- AC voltage
- LowZ AC / DC
- Resistance
- Continuity test
- Diode test
- Capacities
- Temperature (type K)
- Frequency (with the current clamp)
- Frequency (during voltage measurement)
- frequency (direct measurement)
- Duty cycle
The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.
- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via wifi and USB
- Two different probes for NFe and Fe (included)
The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.
- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 161-464902-5 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
