Wind Measurer

The wind measurer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the wind measurer can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement

The wind measurer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the wind measurer can measure the volume flow and the ambient temperature.

• Measuring range: 0.3 … 30.0 m/s / 0.98 … 98.4 ft/s
• Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
• Probe diameter: Ø0.8 … 1.2 mm / 0.031 x 0.047"
• Data memory for 960 measured values
• Wind speed
• Volume flow
• Temperature measurement
• incl. ISO Calibration Certificate (wind speed function only)

This wind measurer station with outside sensor is a real all-rounder. The wireless wind measurer station with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless wind measurer station and outside sensors. The weather data of the wind measurer station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.

• 3 displays
• Indoor temperature in Celsius or Fahrenheit
• Outside temperature in Celsius or Fahrenheit
• Indoor air humidity / outdoor air humidity
• Air pressure gauge in inHg or hPa
• Absolute or relative air pressure display selectable
• Precipitation indication in mm or inch
• Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
• Wind speed in mph, km/h, m/s, knots …
• Wind direction indicator
• Wind chill temperature gauge
• Weather forecast, trend indicator, storm warning
• and much more…

This airwheel wind measurer is very economical. With this airwheel wind measurer you can measure wind speed and air temperature.

• Speed measurement up to 45 m/s or 100 mph
• Wind speed: 0.01 m/s, accuracy ±3% ±0.1
• Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
• Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
• Incl. ISO calibration certificate

The Wind Measurer PCE-VA 11 is an extensively used measuring instrument. This wind measurer offers the opportunity to determine air speeds, air temperature and infrared temperature. The illuminated LCD allows comfortable readings and facilitates use in dimly lit areas.

• Air speed range: 0.4 … 30 m/s / 0.9 … 67 mph
• Air flow range: 0 … 9999 CFM / CMM
• Air temperature range: -10 … 60°C / 14 … 140°F
• IR temperature range: -50 … 500°C / -58 … 932°F

PCE-VA 20 is a multifunction wind measurer for assessing wind, weather, indoor / outdoor environmental climate conditions as well as for testing heating, ventilation and air conditioning or cooling (HVAC) systems. This combination anemometer-hygrometer-thermometer features a 10 cm / 3.9" Ø fan impeller, easy-to-read backlit LCD, and functions such as display hold, average value, maximum value, minimum value, battery-saving automatic power off, low-battery indicator, and metric or imperial unit selection.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1

PCE-HVAC 2 is a high-velocity multifunction wind measurer or anemometer with a pitot tube. This portable wind measurer can be used to determine air speed, air pressure, air flow, differential pressure and ambient temperature. The pitot tube allows access through tiny openings to take measurements in small pipe systems and other confined spaces.-

• Measures air velocities up to 80 m/s / 262 ft/s, 2.24 … 178.66 MPH  
• Zero, minimum, maximum, average, record and hold functions
• Stores to memory up to 99 measurement values per parameter

The Multifunction Wind Measurer PCE-THA 10 is easy to operate with one hand thanks to its compact size, the new structure and integrated impeller. In addition to the wind speed, the wind measurer measures the temperature, humidity, dew point, the wet bulb temperature and the air volume. Average wind speed values can be determined with the wind measurer from the 20 preset points.

- Temperature measuring range: -15 ... 50°C / 5 ... 122°F
- Humidity range: 5 ... 95% RH
- Air speed: 0.4 ... 35 m / s
- Air flow: 0 ... 9.999 m³ / s
- Incl. ISO Calibration Certificate