Ultrasonic Thickness Gauges / Ultrasonic Wall Thickness Gauges

Non-destructive material testing by means of an ultrasonic testing device. Whether for quality inspection of the end products, for spot checks in the production process or in incoming inspection – assess the quality of your materials or workpieces using an ultrasonic tester. PCE Instruments offers testing devices for non-destructive material testing for the wall thickness measurement, hardness measurement, examination of weld seams (weld seam testing), detection of cracks and inclusions in workpieces of all kinds or for leak testing or leak detection. All ultrasonic meters operate completely non-destructively. Thus, they do not generate any additional waste during material and workpiece testing by means of ultrasound.

A portable ultrasonic measuring device already covers 90 % of all workpiece inspections for the essential measuring parameters and inspection situations in industry. In addition, there are application-specific options for ultrasonic flaw detection as well as online/inline flaw detection systems for the continuous use in production. Detect cracks, voids and inclusions, inspect welds and forgings, detect leaks and reproducibly measure the hardness of your workpieces – all with the ultrasonic flaw detector from PCE Instruments.

If you have any questions, please contact us at or +1 (561) 320-9162.

Ultrasonic Thickness Gauges PCE-TG 75

US$ 521.00

ex. VAT, ex. delivery costs

The ultrasonic thickness gauges can measure material thicknesses up to 225 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the ultrasonic thickness gauges.

- Measuring range: 1.00 ... 225.0 mm / 0.04 ... 8.85"
- Resolution: 0.01 mm at ≤99.99 mm
0.1 mm at ≥100.0 mm
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 500 measured values
- Calibration reference on housing

Ultrasonic Wall Thickness Gauges PCE-TG 75-ICA incl. ISO Calibration Certificate

US$ 681.00

ex. VAT, ex. delivery costs

The ultrasonic wall thickness gauges can measure material thicknesses up to 225 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the ultrasonic wall thickness gauges.

Ultrasonic Wall Thickness Gauges PCE-TG 150

US$ 693.00

ex. VAT, ex. delivery costs

The ultrasonic wall thickness gauges can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the ultrasonic wall thickness gauges.

- Measuring range: 1.00 ... 300.0 mm / 0.04 ... 11.81"
- Resolution: 0.01 mm at ≤99.99 mm
0.1 mm at ≥100.0 mm
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing

Ultrasonic Wall Thickness Gauges PCE-TG 150-ICA incl. ISO Calibration Certificate

US$ 1,011.00

ex. VAT, ex. delivery costs

Wall Thickness Gauge PCE-TG 150 HT-ICA incl. ISO Calibration Certificate

US$ 1,254.00

ex. VAT, ex. delivery costs

- Measuring range: 1.20 ... 300.0 mm / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- High temperature probe: -10 ... 350 °C / 14 ... 662 °F
- incl. ISO Calibration Certificate

Wall Thickness Meter PCE-TG 150 HT

US$ 1,254.00

ex. VAT, ex. delivery costs

The wall thickness meter can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the wall thickness meter.

Ultrasonic Thickness Gauges PCE-TG 150 F2.5

US$ 787.00

ex. VAT, ex. delivery costs

The ultrasonic thickness gauges can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the Ultrasonic Thickness Gauges.

- Measuring range: 1.20 ... 300.0 mm / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- Probe temperature range: -10 ... 60 °C / 14 ... 140 °F

Ultrasonic Wall Thickness Gauges PCE-TG 150 F2.5-ICA incl. ISO Calibration Certificate

US$ 787.00

ex. VAT, ex. delivery costs

- Measuring range: 1.20 ... 300.0 mm / 0.04 ... 11.81"
- Accuracy: ±0.5% of measured value + 0.05 mm
- Memory capacity: 1500 measured values
- Calibration reference on housing
- Probe temperature range: -10 ... 60 °C / 14 ... 140 °F
- ICA incl. ISO Calibration Certificate

Ultrasonic Thickness Gauges PCE-FD 20

US$ 6,071.00

ex. VAT, ex. delivery costs

PCE-FD 20 is a portable ultrasonic thickness gauges or ultrasonic wall thickness gauges with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based ultrasonic thickness gauges uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.

- Operating frequency range: 1 ... 10 MHz
- Measured time interval range: 6 ... 1000 microseconds (µs)
- Sound velocity: 1000 ... 9999 m/s

Ultrasonic Thickness Gauge PCE-TG 300-P5EE

US$ 1,683.00

ex. VAT, ex. delivery costs

The PCE-TG 300-P5EE is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

- Measuring range: P-E: 2 ... 600 mm / 0.07 ... 23.62", E-E: 2.5 ... 100 mm / 0.09 ...3.93"
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5MHz
- Bluetooth

Ultrasonic Thickness Gauge PCE-TG 300-P5EE-ICA incl. ISO calibration certificate

US$ 1,835.00

ex. VAT, ex. delivery costs

Ultrasonic Thickness Gauge PCE-TG 300-NO5/90

US$ 1,319.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5/90 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Sensor at 90° angle
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth

Ultrasonic Thickness Gauge PCE-TG 300-NO5

US$ 1,346.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO5 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

- Measuring range: 1 ... 600 mm / 0.039 ... 23.62" (steel)
- Diameter: 10mm / 0.39"
- Minimum diameter of pipes: 20 x 3 mm / 0.787 ... 0.118"
- Frequency: 5 MHz
- Bluetooth

Ultrasonic Thickness Gauge PCE-TG 300-NO7

US$ 1,392.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO7 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

- Measuring range: 0.65 ... 200 mm / 0.025 ... 7.87" (steel)
- Diameter: 6 mm / 0.23"
- Minimum diameter of pipes: 15 x 2 mm / 0.59 x 0.07"
- Frequency: 7 MHz
- Bluetooth

Ultrasonic Thickness Gauge PCE-TG 300-NO2

US$ 1,399.00

ex. VAT, ex. delivery costs

The PCE-TG 300-NO2 is an ultrasonic thickness gauge for measuring wall thickness. In general, the wall thicknesses of all homogeneous materials can be measured with the ultrasonic thickness gauge. Wall thicknesses under a coating can also be measured with the ultrasonic thickness gauge.

- Measuring range: 3.0 … 300.0 mm / 0.118 ... 11.81" (steel)
- Diameter: 14 mm / 0.55"
- Minimum diameter of pipes: 30 mm / 1.18"
- Frequency: 2.5 MHz
- Bluetooth

Ultrasonic Thickness Gauge PCE-TG 300-NO5/90-ICA incl. ISO calibration certificate

US$ 1,478.00

ex. VAT, ex. delivery costs

Ultrasonic Thickness Gauge PCE-TG 300-NO5-ICA incl. ISO calibration certificate

US$ 1,505.00

ex. VAT, ex. delivery costs

Ultrasonic Thickness Gauge PCE-TG 300-NO7-ICA incl. ISO calibration certificate

US$ 1,551.00

ex. VAT, ex. delivery costs