The Ultrasonic testing device is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the Ultrasonic testing device considerably easier.
The Ultrasonic testing device is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm.
The ultrasonic thickness gauges can measure material thicknesses of up to 225 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic thickness gauges.
The ultrasonic thickness gauges can measure material thicknesses of up to 225 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic thickness gauges.
The Ultrasonic testing device can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the Ultrasonic testing device.
The Ultrasonic testing device is the ideal measuring device to determine the fill level of a silo. Thanks to the 4 … 20-mA output signal, the Ultrasonic testing device can also be connected to the operational process control.
The Ultrasonic testing device can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the Ultrasonic testing device.
Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
The Ultrasonic testing device is the ideal measuring device to determine the filling level of a silo. Thanks to the 4 … 20 mA output signal, the Ultrasonic testing device can also be connected to the operational process control.
The Ultrasonic testing device can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the Ultrasonic testing device.
Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
Probe temperature range: -10 … 60 °C / 14 … 140 °F
The Ultrasonic testing device can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the Ultrasonic testing device.
With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN10 / 3/8" and various pipe materials such as steel, copper, aluminum, and plastics.
With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN15 / 1/2" and various pipe materials such as steel, copper, aluminum, and plastics.
With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN20 / 3/4" and various pipe materials such as steel, copper, aluminum, and plastics.
With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN25 / 1" and various pipe materials such as steel, copper, aluminum, and plastics.
With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN4 / 1/8" and various pipe materials such as steel, copper, aluminum, and plastics.
With our Ultrasonic testing device, you have the capability to measure flow rates from ±0.1 m/s to ±5 m/s. The Ultrasonic testing device is suitable for small pipes with a diameter of DN8 / 1/4" and various pipe materials such as steel, copper, aluminum, and plastics.
The Ultrasonic testing device can measure material thicknesses up to 300 mm. So that the material thickness of a wide variety of homogeneous materials can be measured, it is possible to store the corresponding sound velocity in the Ultrasonic testing device.
Measuring range: 1.20 … 300.0 mm / 0.04 … 11.81"
Accuracy: ±0.5% of measured value + 0.05 mm
Memory capacity: 1500 measured values
Calibration reference on housing
High temperature probe: -10 … 350 °C / 14 … 662 °F
The material thickness gauge can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the material thickness gauge.
