Ultrasonic Tester / Ultrasonic Testing

Ultrasonic Thickness Tester PCE-FD 20
US$ 6,071.00
ex. VAT, ex. delivery costs

PCE-FD 20 is a portable ultrasonic thickness tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


  • Operating frequency range: 1 … 10 MHz
  • Measured time interval range: 6 … 1000 microseconds (µs)
  • Sound velocity: 1000 … 9999 m/s 

Ultrasonic Thickness Tester PCE-UFD 50
US$ 4,609.00
ex. VAT, ex. delivery costs
The ultrasonic thickness tester is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the ultrasonic thickness tester considerably easier.

  • Test range: 0 … 10000 mm
  • Pulse shift: -20 … +3400 µs
  • Single or dual probe measurement
  • AVG and DAC evaluation methods
  • Speed of sound 1000 … 15000 m/s
  • USB interface and software
  • Memory for up to 100 data records
Ultrasonic Thickness Gauge PCE-UFD 50
US$ 3,545.00
ex. VAT, ex. delivery costs
The ultrasonic thickness gauge is used for non-destructive material testing. With adjustable frequencies between 0.5 … 20 MHz and sound velocities between 1000 … 15000 m/s, measurements can be carried out in steel in the range between 0 … 10000 mm. DAC and AVG evaluation methods, display and probe delay, attenuation and amplification functions, export and report generation functions as well as numerous other setting options make non-destructive material testing with the ultrasonic thickness gauge considerably easier.

  • Test range: 0 … 10000 mm
  • Pulse shift: -20 … +3400 µs
  • Single or dual probe measurement
  • AVG and DAC evaluation methods
  • Speed of sound 1000 … 15000 m/s
  • USB interface and software
  • Memory for up to 100 data records
Ultrasonic Tester / Ultrasonic Testing PCE-UCD 100
US$ 6,930.00
ex. VAT, ex. delivery costs
The ultrasonic tester / ultrasonic testing sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this ultrasonic tester / ultrasonic testing enables accurate verification of concrete piles, concrete beams, and other components. This innovative ultrasonic tester / ultrasonic testing not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

  • Measurement range: -1677700 µs to +1677700 µs
  • Resolution: 0.05 µs
  • Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
  • Includes a camera for measuring crack width
  • Bandwidth: 1 to 500 kHz
  • Display: 10.1" TFT touchscreen display
  • Internal storage: 8 GB
Ultrasonic Thickness Tester PCE-TG 75A
US$ 528.00
ex. VAT, ex. delivery costs
The ultrasonic thickness gauges can measure material thicknesses of up to 225 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic thickness gauges.

  • Measuring range: 1.00 … 225.0 mm
  • Resolution: 0.01 mm at ≤99.99 mm
  • Accuracy: ±0.5 % of Mw. + 0.05 mm
  • Memory capacity: 500 measured values
  • Calibration reference on housing
Ultrasonic Thickness Tester PCE-TG 100
US$ 629.00
ex. VAT, ex. delivery costs

The PCE-TG 100 is a compact ultrasonic thickness tester for homogeneous materials. This ultrasonic thickness tester PCE-TG 100 works with an external ultrasonic probe; this probe conducts ultrasonic waves into the material to be tested. Different materials conduct ultrasound at different speeds, so you can choose different ultrasonic speeds on the PCE-TG 100 Ultrasonic Thickness Tester.


- Measurement range: 0.8 mm ... 225 mm / 0.03 in ... 8.86 in (displays in mm only)
- Adjustable sound velocity
- Suitable for metals, glass, plastics
- 5 MHz probe
- External sensor
- Material thickness

Ultrasonic Thickness Tester PCE-TG 75A-ICA incl. ISO calibration certificate
US$ 686.00
ex. VAT, ex. delivery costs
ISO Calibration
The ultrasonic thickness gauges can measure material thicknesses of up to 225 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic thickness gauges.

  • Measuring range: 1.00 … 225.0 mm
  • Resolution: 0.01 mm at ≤99.99 mm
  • Accuracy: ±0.5 % of Mw. + 0.05 mm
  • Memory capacity: 500 measured values
  • Calibration reference on housing
  •  incl. ISO calibration certificate
Ultrasonic Thickness Tester PCE-TG 150A
US$ 699.00
ex. VAT, ex. delivery costs
The ultrasonic thickness tester can measure material thicknesses of up to 300 mm. In order to measure the material thickness of a wide variety of homogeneous materials, it is possible to store the corresponding sonic velocity in the ultrasonic thickness tester.

  • Measuring range: 1.00 … 300.0 mm
  • Resolution: 0.01 mm at ≤99.99 mm
  • Accuracy: ±0.5 % of Mw. + 0.05 mm
  • Memory capacity: 1500 measured values
  • Calibration reference on housing
Ultrasonic Thickness Tester PCE-TG 110
US$ 749.00
ex. VAT, ex. delivery costs

The Ultrasonic Thickness Tester PCE-TG 110 is a thickness gauge with external high-temperature probe for ferrous and non-ferrous metals etc. The PCE-TG 110 is an ideal ultrasonic thickness tester for water pipes, steam pipes and pipes for chemicals.


- Measurement range: 2.5 mm ... 200 mm / 0.10 in ... 7.87 in (displays in mm only)
- Suitable for homogeneous materials such as metals, glass, ...
- Including special coated 5 MHz probe (usable up to 400°C / 752°F)
- External sensor