Thickness Meter

PCE-FD 20 is a portable ultrasonic tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.

• Operating frequency range: 1 … 10 MHz
• Measured time interval range: 6 … 1000 microseconds (µs)
• Sound velocity: 1000 … 9999 m/s 

PCE-CT 27FN is a Thickness Meter that takes non-destructive measurements of nonmagnetic coating, insulating layer and dry film thickness (DFT) on metal substrates such as steel and aluminum. Ideal for surface testing, automotive paint inspection, material testing and manufacturing quality control applications.

• Measuring range of 0 … 1250 µm / 0 … 50 mils
• Accuracy of ±(2 % + 2 µm) / ±(2 % + 0.1 mils)
• Features a resolution of 0.1 µ / 0.1 mils 

The PCE-CT 28 Thickness Meter for cars is for measuring the thickness of paint and plastic on ferrous or non-ferrous materials without damaging the coating's surface. The Thickness Meter stands out due to its high range of measurement.

• Measurement range: 0 … 1250 µm / 49.2 mils
• Resolution: 0.1 µm / 0.004 mils (in a range of 0.0 µm … 99.9 µm / 3.9 mils)  1 µm / 0.04 mils (above the range)
• Accuracy: ± 2% or 2.5 µm / 0.1 mils (highest reading is valid)
• Display: LCD with 4 mm x 10 mm (0.2 in x 0.4 in) high digits

• Measuring range: 0 … 2000 µm
• Resolution: 0.1 µm (0 … 99.9 µm), 1 µm (100 … 2000 µm)
• Accuracy: ≤ ±(3% of reading + 2 µm)
• Automatic base material detection
• Automatic selection of measuring method
• Measuring method: magnetic induction (Fe) / eddy current (NFe)
• Units: µm, mm, mil
• Internal memory for up to 30 measured values

PCE-TG 250 is a portable Thickness Meter with an easy-to-read 4-digit display. This ultrasound-based Thickness Meter uses a contact transducer (included) to measure the thickness of coated and uncoated ferrous and non-ferrous metal, glass, plastic, and other homogeneous materials including aluminum, brass, copper, iron, lead, nickel, steel, gold, titanium, pyrex and quartz glass, nylon, polyethylene, and silicone rubber.

- Measurement range: 1 mm ... 250 mm / 0.04 in ... 9.84 in (uncoated steel), 2.5 mm ... 20 mm / 0.1 in ... 0.79 in (coated surfaces)
- Accuracy: ±0.5% of measured value + 0.02 mm / 0.0008 in
- Resolution: 0.01 mm / 0.0004 in (Less than 100 mm / 3.9 inch); 0.1 mm / 0.004 in (over 100 mm / 3.9 inch)
- Sound velocity: 1000 m/s ... 9999 m/s / 3280 ft/s ... 32805 ft/s

• Measurement range: 1.20 ... 300.0 mm
• Resolution: 0.01 mm at ≤99.99 mm
• Accuracy: ±0.5 % of Rd. + 0.05 mm
• Memory capacity: 1500 measured values
• Calibration reference on housing
• Probe temperature range: -10 ... 60 °C
• Thickness measurement of cast materials

The PCE-TG 100 is a compact ultrasonic thickness meter for homogeneous materials. This ultrasonic thickness meter PCE-TG 100 works with an external ultrasonic probe; this probe conducts ultrasonic waves into the material to be tested. Different materials conduct ultrasound at different speeds, so you can choose different ultrasonic speeds on the PCE-TG 100 Ultrasonic Thickness Meter.

- Measurement range: 0.8 mm ... 225 mm / 0.03 in ... 8.86 in (displays in mm only)
- Adjustable sound velocity
- Suitable for metals, glass, plastics
- 5 MHz probe
- External sensor
- Material thickness

• Measurement range: 1.20 ... 300.0 mm
• Resolution: 0.01 mm at ≤99.99 mm
• Accuracy: ±0.5 % of Rd. + 0.05 mm
• Memory capacity: 1500 measured values
• Calibration reference on housing
• Probe temperature range: -10 ... 60 °C
• Thickness measurement of cast materials
• incl. ISO-Calibration Certificate

• For FE metals
• Wireless interface for Windows, iOS and Android
• OLED display
• IP54 housing

• Measuring range: 2 ... 5000 µm
• Accuracy: 1 µm
• FE / nFE metals
• Wireless interface for Windows, iOS and Android
• OLED display
• Swiveling probe
• IP54 housing

• Measuring range: 2 ... 1000 µm
• Resolution: 0.1 µm
• for FE metals
• Wireless interface for Windows, iOS and Android
• OLED display
• IP64 housing

• Layer thickness: 2 ... 5000 µm
• Resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 px)
• Data storage
• USB and wireless
• Standard FE probe with sliding sleeve and prism

• Layer thickness: 2 ... 5000 µm
• Resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Standard FE probe with sliding sleeve and prism, swiveling

• Layer thickness: FE: 2 ... 5000 µm
• Coating thickness: NF: 2 ... 2000 µm
• Resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Dual probe with sliding sleeve and prism

• Layer thickness: 2 ... 7000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• FE probe for thick layers with sliding sleeve and prism

• Layer thickness: 2 ... 1000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 px)
• Data storage
• USB and wireless
• Rod-shaped transversal probe for small indoor spaces

• Layer thickness: 2 ... 6000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Rod-shaped transversal probe for interiors and pipes

• Layer thickness: 2 ... 1000 µm
• smallest resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 px)
• Data storage
• USB and wireless
• Spring-loaded measuring probe for small parts and complex surfaces

• Layer thickness: FE: 2 ... 5000 µm
• Coating thickness: NF: 2 ... 2000 µm
• Resolution: 0.1 µm
• Accuracy: ±1 % (100 ... 1000 µm)
• Single measurement, scan measurement, duplex measurement
• Color touch screen (320 × 480 pixels)
• Data storage
• USB and wireless
• Dual probe with sliding sleeve and prism, swiveling

• Coating thickness: 13 ... 5500 µm
• Material thickness: 300 ... 14800 µm
• Resolution: 1 µm
• Accuracy: 3% of the weight
• Multilayer measurements
• Waveform display
• Adjustable sonic velocity
• Continuous measurement possible
• Internal memory for 999 data records
• PC software

• Coating thickness: 13 ... 5500 µm
• Material thickness: 300 ... 14800 µm
• Resolution: 1 µm
• Accuracy: 3% of the weight
• Multilayer measurements
• Waveform display
• Adjustable sonic velocity
• Continuous measurement possible
• Internal memory for 999 data records
• PC software
• incl. ISO Calibration Certificate

PCE-CT 65 is a Thickness Meter that uses magnetic induction (ferrous) or eddy current (non-ferrous) to take non-destructive measurements of coating and dry film thickness (DFT) on metal substrates such as steel and aluminum. This Thickness Meter is ideal for painted and powder-coated surface testing, automotive paint inspection, coated material testing, and manufacturing quality control applications.

• Measuring range of 0 … 1350 µm / 0 … 53 mils
• Accuracy of ±2.5 % ±2 µm for 0 … 1000 µm / ±3.5 % for 1000 µm … 1350 µm / ±2 % ±0.08 mils for 0 … 39.3 mils / ±3.5 % for 39.3 mils … 53.1 mils
• Saves up to 1500 measurements to memory