Monday - Friday
9 am - 5 pm ET
(561) 320-9162
2-Year Warranty
All PCE-Brand Devices Include a 2-Year Warranty Against Manufacturer Defects
CAT III 1000V / for insulation resistance up to 2000 MΩ.
- Measuring ranges AC voltage: 0 ... 750V
- Resolution AC voltage: 1V
- Accuracy AC voltage: ± 1.2% ± 10 dgts
- Complies with IEC1010-1, CAT III 1000V
- Large display with backlight
- Individual measurement and duration measurement
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
ex. VAT, ex. delivery costs
Insulation Meter for high tension up to 5,000.
- For professionals
- 6 digit LCD
- Measurements according to VDE 0413 part 1
- Test tension up to 5,000V
ex. VAT, ex. delivery costs
Insulation Meter for high tension up to 10,000 volts.
- For professionals
- 6 digit LCD
- Measurements according to VDE 0413 part 1
- Test tension up to 10,000V
ex. VAT, ex. delivery costs
The PCE-ITE 50 is a robust insulation tester with a large 3.5" TFT color LCD display. The insulation tester PCE-ITE 50 also offers, in addition to the various measuring modes such as insulation resistance, grounding resistance, loop impedance, voltage, low-impedance measurement and RCD test with the camera function, the possibility of documenting suitable photos with the measurements.
- 3.5" color TFT LCD display
- Loop resistance L-N, L-PE and N-PE
- Adjustable FI test current
- SD card and Bluetooth
- Dual display
- Good / bad FI test
- Low Ohm measurement
- Up to 1000V terminal voltage
ex. VAT, ex. delivery costs
An insulation measuring device is an important measuring instrument for testing the supply lines in order to ensure the safety of the consumers and perfect functionality of household appliances or entire electrical systems. In order for the current to flow properly through the switches, connecting cables and, for example, relays, these must be insulated from one another with the materials. With the help of the insulation meter it is measured then whether the ohmic resistance between the components and connection lines is as high as possible. In this way, before the initial commissioning or the repeat test, it can be checked whether the correct insulation value is available.
When carrying out a measurement, the insulation measuring device must first be connected to the supply line. It is important to pay attention that each connection line is tested with one another. During the test, a high test voltage is given to the supply line to be measured. The insulation measuring device then shows the electrical resistance. The result of the insulation measurement must be as high-resistance as possible to ensure proper functioning. Insulation measurement is an important part of standard VDE 0701-0702 and, for example, standard VDE 0100-600. Corresponding limit values can also be found there.
- test voltage
- more functions
- ISO certification
An important criterion for an insulation meter is the test voltage. The test voltage to be used depends on the later applied operating voltage on the supply line and the consumers. The selected test voltage for an insulation measuring device must be higher than the operating voltage. There is a wide range of insulation measuring devices that can generate test voltage from a few 100 V up to several 10.000 V.
The test voltage is a highly-transformed voltage by the insulation meter, which is taken from its own supply voltage. Many insulation meters are mobile handheld devices and therefore have a power supply from the battery used. The current flowing during the test with the insulation measuring device is therefore often not more than 5 mA. This means that the test voltage cannot be used as a short-term supply voltage even in case of the insulation measuring device.
There are insulation meters performing not only the pure insulation measurement function, but also many other functions. For example, there are insulation meters with a built-in voltage measurement function. This function is very helpful when it must be checked whether there is voltage on the device under test. Many insulation measuring devices do not carry out the measurement automatically if any voltage is detected on the device under test. This minimizes the risk of the operator errors as well as incorrect measurements.
Another possible function in the insulation measuring device is data acquisition. Due to the data acquisition in the insulation measuring device, several measurements can be carried out in succession and then evaluated, for example, on a PC or transferred directly to a digital test report.
Depending on the area of application, the insulation meter must be ISO certified at regular intervals. This ensures that the measurement values obtained with the help of the insulation measuring device are within the stated specifications. A typical interval for renewing an ISO certification for the insulation meter is one year.
