Heat Pump Test Equipment

Heat pumps offer the possibility to utilize ambient heat from the air or the ground for heating purposes. To ensure the efficient operation of the heat pump and the associated components of the heating system, they must be carefully planned and correctly installed. Various measuring devices for heat pumps assist in design and installation. Temperature and pressure measuring devices, as well as multimeters with current clamps for electrical components, are commonly used as measuring instruments for the heat pump.

To ensure that the refrigerant required for the heat pump's operation remains in a closed circuit, refrigerant leak detectors are often used during installation as a measuring instrument for the heat pump. After installation, temperatures at the system components can be quickly and easily monitored using infrared thermometers and thermal imaging cameras. The use of these types of devices as measuring instruments for the heat pump is also recommended in case of malfunctions, failures, and during routine maintenance checks.

Pyrometer PCE-ILD 10

US$ 179.00

ex. VAT, ex. delivery costs

The pyrometer has a measuring range of -50 ... +500 °C and an adjustable emission value between 0.10 ... 1.00. In addition to the current reading, the largest, smallest, average and differential reading can be displayed.

- Measuring range: -50 … 500 °C / -58 … 932 °F
- Resolution: 0.1°C
- Accuracy: ±3 °C / ±5.4 °F at -50 … 20 °C / -58 … 68 °F
- Spot ratio: 12:1
- Multipoint laser

Ultrasonic Leak Detector PCE-LDC 8

US$ 2,145.00

ex. VAT, ex. delivery costs

The Ultrasonic Leak Detector is used to locate leaks on compressed air lines. Furthermore, the Ultrasonic Leak Detector can also be used on coolant lines or gas lines for leak detection.

- Measuring principle: ultrasound

- Measuring principle: air, coolant, non-explosive gases

- Working frequency of 40 kHz

- up to 6 h battery operation

- Leak detection via headphones and LCD display

- Localize leaks up to 18m, 59 ft.

Manometer PCE-932

US$ 338.00

ex. VAT, ex. delivery costs

PCE-932 is an easy-to-use, digital, handheld device for high pressure measurement in hydraulic and compressor systems, pumps, tanks and silos in chemical, manufacturing, plastics and HVAC industries. This portable pressure measuring device can be connected to pressure sensors with ranges up to 400 bar (each with a 1.2 m / 3.9 ft connecting cable). Please note: Pressure sensors are sold separately.

- Measuring range: 0 to 400 bar / 0 to 5801 psi, depending on sensor
- Measures system pressure in all media (e.g., gasses, liquids, etc.)
- Offers min, max and hold functionality

Automotive Tester PCE-OCM 10

US$ 132.00

ex. VAT, ex. delivery costs

The automotive tester PCE-OCM 10 is characterized by the OLED display. The OLED display on this automotive tester allows the display itself to be read in the dark, as it is self-luminous.

- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A

Automotive Tester PCE-OCM 10-ICA incl. ISO Calibration Certificate

US$ 253.00

ex. VAT, ex. delivery costs

The automotive tester is characterized by the OLED display. The OLED display on this automotive tester allows the display itself to be read in the dark, as it is self-luminous.

- Measurable up to 600 A
- Clamp with multimeter functions
- OLED display
- NCV function
- TRMS AC A
- incl. ISO Calibration Certificate

Thermometer PCE-T 420 4-channel

US$ 508.00

ex. VAT, ex. delivery costs

The 4-channel thermometer allows for the display and archiving of multiple temperature sensors simultaneously. It can be connected to up to 8 different types of thermocouples.

- Measurement range from -200 ... +1800 °C

- High resolution of ± (0.04% of full scale + 0.3 K) for Type K

- Connectable with 8 types of thermocouples

- Thermocouple types: K, J, S, R, E, T, N, B

- Storage for 10 million measurement values

- Adjustable alarm limits

- Equipped with 4 channels

Thermometer 4-channel PCE-T 420 incl. ISO-Calibration Certificate

US$ 587.00

ex. VAT, ex. delivery costs

The 4-channel thermometer allows for the display and archiving of multiple temperature sensors simultaneously. It can be connected to up to 8 different types of thermocouples.

- Measurement range from -200 ... +1800 °C

- High resolution of ± (0.04% of full scale + 0.3 K) for Type K

- Connectable with 8 types of thermocouples

- Thermocouple types: K, J, S, R, E, T, N, B

- Storage for 10 million measurement values

- Adjustable alarm limits

- Equipped with 4 channels
- incl. ISO-Calibration Certificate

Clamp Meter PCE-CTI 10

US$ 480.00

ex. VAT, ex. delivery costs

The clamp meter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the clamp meter is inductive. To do this, the supply line is placed in the clamp meter.

- Measuring range: 0 ... 1500 V AC/DC
- Free app for Android and iOS
- Data logging for up to 100,000 measured values
- Inrush current measurement
- Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V

Clamp Meter PCE-CTI 10-ICA incl. ISO Calibration Certificate

US$ 571.00

ex. VAT, ex. delivery costs

Current Clamp PCE-MCM 10

US$ 376.00

ex. VAT, ex. delivery costs

The current clamp has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the current clamp is a particularly accurate measuring instrument. In order to conveniently perform measurements with the current clamp, the current clamp itself is connected to a 1 meter / 3.3 ft cable.

- Measuring range 1: ±20.99 mA DC

- Measuring range 2: ±21.0 … ±99.9 mA DC

- Diameter of clamp opening: Ø5 mm

- Detachable current clamp with 1 m / 3.3 ft cable

Current Clamp PCE-MCM 10-ICA incl. ISO Calibration Certificate

US$ 581.00

ex. VAT, ex. delivery costs

- Measuring range 1: ±20.99 mA DC

- Measuring range 2: ±21.0 … ±99.9 mA DC

- Diameter of clamp opening: Ø5 mm

- Detachable current clamp with 1 m / 3.3 ft cable

- Incl. ISO Calibration Certificate

Voltmeter PCE-CM 3

US$ 119.00

ex. VAT, ex. delivery costs

The voltmeter is used for quick and easy AC measurements. For current measurement, the voltmeter is plugged over the live conductor. The voltmeter is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
CAT II 1000V
CAT III 600V

Voltmeter PCE-CM 3-ICA incl. ISO Calibration Certificate

US$ 288.00

ex. VAT, ex. delivery costs

- Digital Multimeters up to 200 A

- Compact dimensions

- Robust plastic housing

- Multimeter functions

- Safety conditions: IEC1010-1 (2001)

CAT II 1000V

CAT III 600V

- Incl. ISO Calibration Certificate

Temperature Data Logger PCE-T 330

US$ 317.00

ex. VAT, ex. delivery costs

The temperature data logger has two measuring inputs. Each measuring input from the temperature data logger can be connected to a thermocouple of type K, T and J. With a measuring rate of 2 Hz, the temperature data logger shows rapid temperature fluctuations.

- Measuring range dependent on sensor: -200 ... 1370 °C / -328 ... 2498 °F
- Resolution: 0.01 °C
- Two-channel temperature data logger
- For thermocouples type K, T and J
- Data storage for 20,000 measuring points

Temperature Data Logger PCE-T 330-ICA incl. ISO Calibration Certificate

US$ 395.00

ex. VAT, ex. delivery costs

Pyrometer PCE-895

US$ 871.00

ex. VAT, ex. delivery costs

The dual infrared pyrometer is used for fast surface temperature measurement. The two laser points of the pyrometer PCE-895 mark the exact measuring point and thus offer excellent assistance with the temperature measurement.

- Temperature measurement up to 1600°C / 2912°F
- Cross laser thermometer
- K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Can be calibrated
- Suitable for long-term measurements

Pyrometer PCE-895-ICA incl. ISO Calibration Certificate

US$ 1,016.00

ex. VAT, ex. delivery costs

The pyrometer is used for fast surface temperature measurement. The two laser points of the pyrometer PCE-895-ICA mark the exact measuring point and thus offer excellent assistance with the temperature measurement.

- Temperature measurement up to 1600°C / 2912°F
- Cross laser thermometer
- K-Type or infrared measurement
- Optical resolution: 60:1
- Adjustable emissivity
- Suitable for long-term measurements
- Incl. ISO Calibration Certificate

Infrared Thermometer PCE-MIR 20

US$ 78.00

ex. VAT, ex. delivery costs

The infrared thermometer has a measuring range of -50 ... +760 °C and thus covers a wide temperature range. With an accuracy of ±2 % ±2 °C at 20 ... 760 °C, the infrared thermometer is a very precise measuring device.

- Measuring range: -50 ... +760 °C,
-58 ... +1400 °F

- Resolution: 0.1 °C / 0.1 °F

- Spot ratio: 12:1

- Laser class: 2