PCE Instruments

Automotive Tester

Order no.: PCE-CM 5
The automotive tester is a multimeter with a multitude of different functions. Thus, with the automotive tester, current measurements up to 200 A AC can be carried out without contact. This current range of the automotive tester already covers a large range of current measurements. 

Measurement function:
- AC
- DC
- DC voltage
- AC voltage
- LowZ AC / DC
- Resistance
- Continuity test
- Diode test
- Capacities
- Temperature (type K)
- Frequency (with the current clamp)
- Frequency (during voltage measurement)
- frequency (direct measurement)
- Duty cycle
Manufacturer: PCE Instruments
US$ 88.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-T 260
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the automotive tester also has the option of removing the rotational contacts and measuring temperatures.

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
Manufacturer: PCE Instruments
US$ 391.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-T 260-ICA
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope function, the automotive tester also has the option of removing the rotational contacts and measuring temperatures.  

- Optical tachometer
- Measuring range: 5 ... 99999 rpm
- Contact tachometer
- Stroboscope LED
- Temperature measurement: Type K, PT 1000, Infrared
- LED Flash frequency: 100 ... 99990 FPM
- Temperature measurement: Type K, PT 1000
- Infrared
- Incl. ISO calibration certificate (only for the tachometer function)
Manufacturer: PCE Instruments
US$ 541.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 26FN
The PCE-CT 26FN automotive tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN automotive tester is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm / 0 ...  49.2 mils 
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
Manufacturer: PCE Instruments
US$ 165.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 26FN-ICA
The PCE-CT 26FN automotive tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN automotive tester is ideally suited to immediately detect, for example, accident damage to the vehicle. 

- Measuring range: 0 ... 1250 μm / 0 ...  49.2 mils 
- Resolution: 1 μm / 0.039 mils
- Accuracy: ± (3% + 2 μm / 0.079 mils)
- Wear-resistant sensor
- V-groove for measurement on pipes
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
US$ 368.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-VE 270HR
The PCE-VE 270HR automotive tester / borescope gives you new, visual insights into the interior of motors and systems. The automotive tester / borescope is the ideal tool for maintenance and repair in workshops or industrial companies. Optical analysis with an automotive tester / borescope has never been so easy.

- Cable length:  2 m, 6.56 ft
- Cable diameter:  2.8 mm, 0.11 inch
- 0° viewing angle
- Camera resolution / image sensor:  400 x 400 Px
- Cable type: flexible
- Video output: HDMI
- LED light

 

Manufacturer: PCE Instruments
US$ 3,564.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-ACT 10
The automotive tester PCE-ACT 10 is a versatile meter in the automotive sector. Possible measuring functions are the voltage measurement, resistance measurement and the diode measurement of the vehicle measuring instrument

- Various measuring functions
- Adapter for cigarette lighter
- LED lighting
Manufacturer: PCE Instruments
US$ 59.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-BFT 2

This practical and handy brake fluid tester in pen format should not be missing in any car or hobby workshop. With the brake fluid tester, the water content in the brake fluid can be checked quickly and precisely. The LC display shows exactly the water content in the brake fluid. So it can be recognized exactly when the brake fluid must be changed.

 

- To determine the quality of the brake fluid
- Adjustment of the brake fluid tester possible
- Fast and accurate results
- Suitable for DOT3, DOT4 and DOT5.1

Manufacturer: PCE Instruments
US$ 66.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-S 40

The PCE-S 40 is an automotive-testing acoustic stethoscope which amplifies machine noises. An acoustic stethoscope makes it possible to detect noises in bearings, fan flaps, pumps and similar parts. In mechanical engineering, it is used for preventive maintenance to diagnose potential machine faults before they arise.


- Measuring tip: approx. 16.5 cm
- Earpieces made of soft plastic
- Total length: approx. 1 m
- Tight ear clips

Manufacturer: PCE Instruments
US$ 66.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CBA 10

The Automotive Tester PCE-CBA 10 can be used as a car battery tester. To test the battery, the automotive tester can measure, inter alia, the starting current to determine the capacity of the car battery in the range between 30 and 100 Ah.

- For 12V starter batteries
- Cold start current CCA:  100 ... 1700 A
- Battery capacity:  30 Ah ... 100 Ah
- Battery standards:  DIN, JIS, EN, IEC, SAE, GB & MCA

Manufacturer: PCE Instruments
US$ 72.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-SG

PCE-SG is an automotive tester or handheld refractometer used to determine the specific gravity (sg) of electrolyte solution batteries as well as the freezing point of propylene or ethylene glycol-based coolants in degrees Celsius (°C). This refractometer works well for measuring cleaning products too. The instrument also gives indication of the charge level in battery acid.


Measurement ranges:
   -50 ... 0 °C for coolant or antifreeze
   1.15 ... 1.30 sg for battery acid
   -40 ... 0 °C for cleaner

 

Manufacturer: PCE Instruments
US$ 79.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC 10
The automotive tester is an ideal measuring device for the fast measurement of currents and voltages. To perform current measurements, a automotive tester must be connected in series to the load.

Measuring function
- AC power
- AC voltage
- DC voltage
- Resistance
- Frequency
- Duty cycle
- Three measurements per second
- "SMART" function facilitates operation
Manufacturer: PCE Instruments
US$ 79.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-AT 5

The PCE-AT 5 automotive tester / handheld ignition-tachometer is a portable device used to measure revolutions per minute (rpm) in one-cylinder two-stroke and eight-cylinder four-stroke combustion engines with electric ignition starters. The PCE-AT 5 handheld automotive ignition-tachometer features an easy-to-read, backlit digital LCD display and flashlight functionality for low-light applications.


- Measurement range: 100 ... 20000 rpm
- Resolution: 1 rpm
- Accuracy: ± 10 rpm
- Measurement interval: 0.5 seconds

 

Manufacturer: PCE Instruments
US$ 85.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DT 50
The revolver PCE-DT 50 in the form of a pistol is ideal for quick control of speeds. This PCE-DT 50 automotive tester measures the rotational speed of moving objects, such as shafts, drives, pinions etc., without contact using reflective tape to count revolutions.

- Measuring range: 2.5 ... 99,999 rpm (RPM)
- Measurement accuracy: ± 0.02% + 1 digit
- Resolution: 2.5 ... 999 rpm: 0.1 rpm
- MIN / MAX / AVG mode
- Data hold function
Manufacturer: PCE Instruments
US$ 85.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CBA 20

The Automotive Tester tests 12V and 24V starter batteries. The vehicle battery tester checks the condition of the car battery via the battery voltage in the charging cycle, when starting or when idling. 

 

- Measurement object:  12V / 24V starter batteries

- Battery standards: DIN, JIS, EN, SAE

- Power supply: 9 ... 35V DC via test voltage

Manufacturer: PCE Instruments
US$ 86.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-OBD 10
Automotive tester PCE-OBD 10 is a high quality OBD reader for many popular vehicles. This professional automotive tester is a "standalone" OBD reader and therefore requires no accessories.

- Read out and delete OBD error codes
- Battery tester
- Live data display even whilst the vehicle is in motion
- 2.4" TFT color display
Manufacturer: PCE Instruments
US$ 86.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-S 41

The PCE-S 41 Mechanics Stethoscope is battery powered and easy to use. This Mechanics Stethoscope can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.


- Frequency range: 100 Hz to 10 kHz
- Headphones, 70 mm long sensor, 290 mm long sensor, battery, carrying case
- Weight: 240 g, with battery
- Dimensions: 206 mm x 50 mm x 32 mm

 

Manufacturer: PCE Instruments
US$ 119.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC 20
The automotive tester is a versatile measuring instrument for the determination of currents, voltages and many other electrical quantities. With a current clamp opening of 40 mm / 1.6 in, even cables with a larger diameter can be tested with the automotive tester.

Measurement functions
- DC power
- AC power
- DC voltage
- AC voltage
- Resistance
- Frequency (direct)
- Frequency (current clamp)
Manufacturer: PCE Instruments
US$ 138.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-CT 25FN

The Automotive Material Thickness Tester is used for the quick and precise detection of layer thicknesses on metals. In comparison to many other thickness meters, this Automotive Material Thickness Tester does not have to differentiate between ferrous and non-ferrous metal.

- Measuring range:  0 ... 1500 µm
-  Minimum thickness: Fe: 0.3 mm, NFe: 0.05 mm
- Measuring accuracy: ± (3% + 1 µm)
- Resolution: 0.1 µm in the measuring range 0 ... 100 µm
                      1 µm in the measuring range> 100 µm
Manufacturer: PCE Instruments
US$ 140.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-DC 25
The automotive tester has a measuring range of 0 … 1000 A AC/DC. The current is measured inductively using the clamp on the measuring device. Live supply lines with a diameter of up to 32 mm (1.2") can be connected to the automotive tester.

- Measuring range: 0 ... 1000 A AC/DC
- Bluetooth interface
- Inrush current measurement
- LC color display
- Not Connected Voltage function
Manufacturer: PCE Instruments
US$ 191.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer