Pressure Indicator

The pressure indicator is used for the signal processing of 4 .. 20 mA. The pressure indicator has a 5-digit LED display to allow the user to read the directly measured current values.

• Power supply: 230 V, 110 V, 24 V, 20 … 40 V AC/DC, 85 … 253 V AC/DC (selectable)
• Input signal: 0/4 … 20 mA, 0 … 60 mV, ±60 mV DC, 0 … 10 V, ± 10 V DC (selectable)
• Display: 4 digits, red
• Digit height: 20 mm

The pressure indicator is used for processing 4…20 mA and 0…20 mA signals. Many measuring transducers and sensors use this type of output, which makes the pressure indicator suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the pressure indicator.

• Input (selectable): 0…20 mA, 4…20 mA, ± 20 mA
• Accuracy: ± (0.2 % FS + 1 dgt.)
• Two open collector outputs
• 24 V power supply sytem for sensors and transducers

The PCE-N20U is a pressure indicator used for signal processing. Designed for quick and easy system integration, the digital pressure indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The pressure indicator also can output signals via two open collector outputs when a threshold value is exceeded.

• Input (selectable): 0…10 V / 0…60 mV / ±10 V
• Accuracy: ± (0.2 % FS + 1 digit)
• 24 V power supply system for sensors and transducers

The pressure indicator can process several different input signals, such as 0…410/4010 Ohm, -10…+63 mV DC, -13…+13 V DC, -24…+24 mA DC or signals from thermocouples and resistance thermometers. This makes the pressure indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the pressure indicator.

• 21-point scaling
• IP 65 protection on the front
• Three-colored display
• Two alarm outputs

• Pressure range: -0.088 ... +1.6 MPa
• Accuracy: 0.1% FS
• Measuring media: water, oil, air
• Interface: RS485

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• Accuracy: 0.1% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +1.6 MPa
• High accuracy: 0.05 % FS
• Measuring media: water, oil, air
• Interface: RS485

• Pressure range: -0.088 ... +2.0 MPa
• Resolution: 0.0001 MPa
• High accuracy: 0.05 % FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm

• Pressure range: -0.088 ... +2.5 MPa
• Resolution: 0.0001 MPa
• High accuracy: 0.05% FS.
• Measuring media: water, oil, air
• Interface: RS485
• Connection: M20 x 1.5 mm