Power Indicator

US$ 277.00

ex. VAT, ex. delivery costs

The power indicator measures current up to 63 A directly. This makes it possible to connect the power display directly to the main distribution. The power indicator measures all relevant network parameters such as current, voltage, power and frequency. The power indicator is ideally suited for measurement purposes in order to comply with the ISO 50001 energy management standard.

Measures up to 63 A directly

Measuring about 1A / 5A transducer possible

Measurement of U, I, f, P

DIN rail

Power Indicator PCE-N24S

US$ 115.00

ex. VAT, ex. delivery costs

The power indicator is used for the signal processing of 4 .. 20 mA. The power indicator has a 5-digit LED display to allow the user to read the directly measured current values.

- Power supply: 230 V, 110 V, 24 V, 20 ... 40 V AC/DC, 85 ... 253 V AC/DC (selectable)
- Input signal: 0/4 ... 20 mA, 0 ... 60 mV, ±60 mV DC, 0 ... 10 V, ± 10 V DC (selectable)
- Display: 4 digits, red
- Digit height: 20 mm

Power Indicator PCE-N24Z

US$ 122.00

ex. VAT, ex. delivery costs

The power indicator is used to display AC parameters. The power indicator can measure and display AC current, AC voltage or frequencies. The possibility of freely scaling the input signal allows a very versatile use of this power indicator.

- Power supply:
   230V, 110V, 24V, 20 ... 40V AC/DC,
   85 ... 253 V AC/DC (selectable)
- Input signal:
   1 ... 100V, 2.5 ... 250V, 4 ... 400V,
   20 ... 500 Hz, 1 A, 5 A (selectable)
- Display: 4 digits, red
- Digit height: 20 mm / 0.78"

Power Indicator PCE-N25S

US$ 125.00

ex. VAT, ex. delivery costs

The power indicator is used for processing standardised signals. Depending on your specific needs, the power indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the power indicator is freely scalable, which increases its application possibilities.

- IP65 protected at the front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

Power Indicator PCE-N20U

US$ 135.00

ex. VAT, ex. delivery costs

The PCE-N20U is a power indicator used for signal processing. Designed for quick and easy system integration, the digital power indicator features a large 5-digit LED display with tricolor coding dependent on the measured values. The power indicator also can output signals via two open collector outputs when a threshold value is exceeded.

- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

Power Indicator PCE-N20Z

US$ 171.00

ex. VAT, ex. delivery costs

The power indicator can be used to measure AC voltages up to 400 V and AC currents. The voltage to be measured is connected directly and can then be read on the 5-digit LED display of the power indicator.

- Input:
   1A AC, 5A AC, 100V AC, 250V AC,
   400 V AC, 20 ... 500 Hz (selectable)
- Supply voltage:
   85 ... 253V AC/DC / 20 ... 40 V AC/DC (selectable)
- Display: 5 digits, three colors
- Digit height: 14 mm / 0.55"

Power Indicator PCE-N30U

US$ 249.00

ex. VAT, ex. delivery costs

The power indicator can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the power indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the power indicator.

- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs