Industrial Measurement Products and Solutions

Digital Universal Indicator

Order no.: PCE-N25S

The digital universal indicator PCE-N25S is used for processing standardised signals. Depending on your specific needs, the digital universal indicator can be ordered with different inputs, such as 0...20 mA, 4...20 mA, 0...60 mV, 0...10 V, ±60 mV or ±10 V. The input signal of the digital universal indicator is freely scalable, which increases its application possibilities.

 

- IP65 protected front
- 6 different standardised signal inputs available
- configuration via software
- 5-digit LED display

 

Manufacturer: PCE Instruments
US$ 120.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-N20U

PCE-N20U is a digital universal display panel meter used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.


- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

Manufacturer: PCE Instruments
US$ 135.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-N20I

The PCE-N20I digital universal indicator is used for processing 4...20 mA and 0...20 mA signals. Many measuring transducers and sensors use this type of output, which makes the PCE-N20I suitable in a wide application area. The measurement results are shown on the large 5-digit LED-display of the PCE-N20I.


- Input (selectable): 0...20 mA, 4...20 mA, ± 20 mA
- Accuracy: ± (0.2 % FS + 1 dgt.)
- Two open collector outputs
- 24 V power supply sytem for sensors and transducers

Manufacturer: PCE Instruments
US$ 135.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-N20U

PCE-N20U is a digital universal indicator used for signal processing. Designed for quick and easy system integration, the digital panel meter features a large 5-digit LED display with tricolor coding dependent on the measured values. The PCE-N20U also can output signals via two open collector outputs when a threshold value is exceeded.


- Input (selectable): 0...10 V / 0...60 mV / ±10 V
- Accuracy: ± (0.2 % FS + 1 digit)
- 24 V power supply system for sensors and transducers

Manufacturer: PCE Instruments
US$ 135.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-N30U

The universal digital indicator PCE-N30U can process several different input signals, such as 0...410/4010 Ohm, -10...+63 mV DC, -13...+13 V DC, -24...+24 mA DC or signals from thermocouples and resistance thermometers. This makes the digital universal indicator applicable in a wide range of applications. The measured values are shown on the large LED display of the PCE-N30U.


- 21-point scaling
- IP 65 protection on the front
- Three-colored display
- Two alarm outputs

Manufacturer: PCE Instruments
US$ 173.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-NA5

The digital universal indicator PCE-NA5 is equipped with a 55-digit bar graph display, which is freely programmable. In addition, the digital indicator also comes with a conventional display, which shows the active measuring value as a figure. The digital universal indicator PCE-NA5 is able to process a large variety of signals.


- 55-digit bar graph display
- 4-digit, 7-segment display
- Analogue output
- Four alarm relays

 

Manufacturer: PCE Instruments
US$ 298.70

ex. VAT, ex. delivery costs

Test Instruments manufacturer
Order no.: PCE-NA6

The digial universal indicator PCE-NA6 series is equipped with two freely programmable 55-digit bar graph displays. In addition, the digital indicator comes with two conventional displays that show the active measuring values as figures. This allows the digital universal indicator to display two different measuring values at the same time, making the device particularly useful for climate control applications.


- Dual 55-digit bar graph displays
- Dual conventional (4-digit, 7-segment) displays
- Optional analogue output and RS485 interface
- Four alarm relays

 

Manufacturer: PCE Instruments
US$ 510.00

ex. VAT, ex. delivery costs

Test Instruments manufacturer