Zum Hauptinhalt springen
Automotive Tester PCE-LES 103UV-365-CTA-KIT
US$ 975.00
ex. VAT, ex. delivery costs
Analysing the movement of rotating machines is quick and easy with our UV Automotive Tester. The UV Automotive Tester is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 202 μW/cm² at a distance of 30 cm. The Automotive Tester allows you to set the flash frequency in both FPM and Hz. And it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • incl. crack detection agent 2-component paint spray
Car Measuring Device PCE-LES 103UV-365-CTA-KIT
US$ 975.00
ex. VAT, ex. delivery costs
Analysing the movement of rotating machines is quick and easy with our UV Car Measuring Device. The UV Car Measuring Device is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 202 μW/cm² at a distance of 30 cm. The Car Measuring Device allows you to set the flash frequency in both FPM and Hz. 

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • incl. crack detection agent 2-component paint spray
Concrete Hardness Tester PCE-HT-75
US$ 975.00
ex. VAT, ex. delivery costs
Topseller

The PCE-HT-75 Concrete Hardness Tester is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This Hardness Tester in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.


  • Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
  • Measuring range: 10 … 70 N/mm²
  • Energy: 0.735 J / 0.54 ft-lbs 
  • Low strength concrete testing or Type L
  • Indication of measurement: 0 to 100 (without dimensions)
  • Maximum thickness of concrete (of the material): 70 cm

Concrete Hardness Tester PCE-HT-75
US$ 975.00
ex. VAT, ex. delivery costs

The PCE-HT-75 Concrete Hardness Tester is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This Hardness Tester in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.


  • Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
  • Measuring range: 10 … 70 N/mm²
  • Energy: 0.735 J / 0.54 ft-lbs 
  • Low strength concrete testing or Type L
  • Indication of measurement: 0 to 100 (without dimensions)
  • Maximum thickness of concrete (of the material): 70 cm

 

Concrete Rebound Test Hammer PCE-HT-75
US$ 975.00
ex. VAT, ex. delivery costs
Topseller

The Concrete Rebound Test Hammer PCE-HT-75 for concrete is easy to use and is fundamentally found in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This Concrete Rebound Test Hammer PCE-HT-75 is based on the Swiss principle of measurement.


  • Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
  • Measuring range: 10 … 70 N/mm²
  • Energy: 0.735 J / 0.54 ft-lbs
  • Low strength concrete testing
  • Indication of measurement: 0 to 100 (without dimensions)
  • Maximum thickness of concrete (of the material): 70 cm

Condition Monitoring Stroboscope PCE-LES 103UV-365-CTA-KIT
US$ 975.00
ex. VAT, ex. delivery costs
Analysing the movement of rotating machines is quick and easy with our UV Condition Monitoring Stroboscope. The UV Condition Monitoring Stroboscope is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 202 μW/cm² at a distance of 30 cm. The Condition Monitoring Stroboscope allows you to set the flash frequency in both FPM and Hz. And it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • incl. crack detection agent 2-component paint spray
Durometer PCE-HT-75
US$ 975.00
ex. VAT, ex. delivery costs
Topseller

The PCE-HT-75 durometer for concrete is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This durometer in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.


  • Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
  • Measuring range: 10 … 70 N/mm²
  • Energy: 0.735 J / 0.54 ft-lbs
  • Low strength concrete testing or Type L
  • Indication of measurement: 0 to 100 (without dimensions)
  • Maximum thickness of concrete (of the material): 70 cm

Environmental Meter PCE-LXT-ICA incl. ISO calibration certificate
US$ 975.00
ex. VAT, ex. delivery costs
ISO Calibration
The environmental meter consists of a measuring sensor with handle, a wall bracket with a 1.5 m / 4.9 ft cable, a light transmitter and a digital display. The main field of application of the environmental meter is the continuous light measurement and light monitoring of photo laboratories and production areas, such as food or drug production.

  • Measuring range: 0 … 50,000 lx
  • Resolution: 0.1 / 1 lx
  • For permanent installation
  • Relay and control output
  • Incl. ISO calibration
Environmental Tester PCE-LXT-ICA incl. ISO calibration certificate
US$ 975.00
ex. VAT, ex. delivery costs
ISO Calibration
The environmental tester consists of a measuring sensor with handle, a wall bracket with a 1.5 m / 4.9 ft cable, a light transmitter and a digital display. The main field of application of the environmental tester is the continuous light measurement and light monitoring of photo laboratories and production areas, such as food or drug production.

  • Measuring range: 0 … 50,000 lx
  • Resolution: 0.1 / 1 lx
  • For permanent installation
  • Relay and control output
  • Incl. ISO calibration
Gloss Meter PCE-GM 80
US$ 975.00
ex. VAT, ex. delivery costs
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
Handheld Tachometer PCE-LES 103UV-365-CTA-KIT
US$ 975.00
ex. VAT, ex. delivery costs
Analysing the movement of rotating machines is quick and easy with our UV Handheld Tachometer. The UV Handheld Tachometer is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 202 μW/cm² at a distance of 30 cm. The Handheld Tachometer allows you to set the flash frequency in both FPM and Hz. And it is small and handy in pocket size and also mains-independent thanks to the rechargeable battery.

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • incl. crack detection agent 2-component paint spray
Illuminometer PCE-LXT-ICA incl. ISO calibration certificate
US$ 975.00
ex. VAT, ex. delivery costs
ISO Calibration
The Illuminometer consists of a measuring sensor with handle, a wall bracket with a 1.5 m / 4.9 ft cable, a light transmitter and a digital display. The main field of application of the Illuminometer is the continuous light measurement and light monitoring of photo laboratories and production areas, such as food or drug production.

  • Measuring range: 0 … 50,000 lx
  • Resolution: 0.1 / 1 lx
  • For permanent installation
  • Relay and control output
  • Incl. ISO calibration
Illuminometer PCE-LXT-ICA incl. ISO calibration certificate
US$ 975.00
ex. VAT, ex. delivery costs
ISO Calibration
The illuminometer consists of a measuring sensor with handle, a wall bracket with a 1.5 m / 4.9 ft cable, a light transmitter and a digital display. The main field of application of the illuminometer is the continuous light measurement and light monitoring of photo laboratories and production areas, such as food or drug production.

  • Measuring range: 0 … 50,000 lx
  • Resolution: 0.1 / 1 lx
  • For permanent installation
  • Relay and control output
  • Incl. ISO calibration
Light Meter PCE-LXT-ICA incl. ISO calibration certificate
US$ 975.00
ex. VAT, ex. delivery costs
ISO Calibration
The light meter consists of a measuring sensor with handle, a wall bracket with a 1.5 m / 4.9 ft cable, a light transmitter and a digital display. The main field of application of the light meter is the continuous light measurement and light monitoring of photo laboratories and production areas, such as food or drug production.

  • Measuring range: 0 … 50,000 lx
  • Resolution: 0.1 / 1 lx
  • For permanent installation
  • Relay and control output
  • Incl. ISO calibration
Lux Meter PCE-LXT-ICA incl. ISO calibration certificate
US$ 975.00
ex. VAT, ex. delivery costs
ISO Calibration
The lux meter consists of a measuring sensor with handle, a wall bracket with a 1.5 m / 4.9 ft cable, a light transmitter and a digital display. The main field of application of the lux meter is the continuous light measurement and light monitoring of photo laboratories and production areas, such as food or drug production.

  • Measuring range: 0 … 50,000 lx
  • Resolution: 0.1 / 1 lx
  • For permanent installation
  • Relay and control output
  • Incl. ISO calibration
Material Tester PCE-HT-75
US$ 975.00
ex. VAT, ex. delivery costs
Topseller

The PCE-HT-75 Material Tester for concrete is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This Material Tester in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.


  • Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
  • Measuring range: 10 … 70 N/mm²
  • Energy: 0.735 J / 0.54 ft-lbs
  • Low strength concrete testing or Type L
  • Indication of measurement: 0 to 100 (without dimensions)
  • Maximum thickness of concrete (of the material): 70 cm

NDT Test Instruments PCE-HT-75
US$ 975.00
ex. VAT, ex. delivery costs
Topseller

The PCE-HT-75 durometer for concrete is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This durometer in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.


  • Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
  • Measuring range: 10 … 70 N/mm²
  • Energy: 0.735 J / 0.54 ft-lbs
  • Low strength concrete testing or Type L
  • Indication of measurement: 0 to 100 (without dimensions)
  • Maximum thickness of concrete (of the material): 70 cm

NDT Tester - Gloss Meter PCE-GM 80
US$ 975.00
ex. VAT, ex. delivery costs

The NDT Tester - Gloss Meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB

Paint Gloss Tester PCE-GM 80
US$ 975.00
ex. VAT, ex. delivery costs
The gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB
Radiation Detector PCE-LXT-ICA incl. ISO calibration certificate
US$ 975.00
ex. VAT, ex. delivery costs
ISO Calibration
The radiation detector consists of a measuring sensor with handle, a wall bracket with a 1.5 m / 4.9 ft cable, a light transmitter and a digital display. The main field of application of the radiation detector is the continuous light measurement and light monitoring of photo laboratories and production areas, such as food or drug production.

  • Measuring range: 0 … 50,000 lx
  • Resolution: 0.1 / 1 lx
  • For permanent installation
  • Relay and control output
  • Incl. ISO calibration
Rotation Meter PCE-LES 103UV-365-CTA-KIT
US$ 975.00
ex. VAT, ex. delivery costs
Analysing the movement of rotating machines is quick and easy with our UV Rotation Meter. The UV Rotation Meter is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 202 μW/cm² at a distance of 30 cm. 

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • incl. crack detection agent 2-component paint spray
Stroboscope / Stroboscope Light PCE-LES 103UV-365-CTA-KIT
US$ 975.00
ex. VAT, ex. delivery costs
Analysing the movement of rotating machines is quick and easy with our UV Stroboscope / Stroboscope Light. The UV Stroboscope / Stroboscope Light is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 202 μW/cm² at a distance of 30 cm. 

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • incl. crack detection agent 2-component paint spray
Surface Testing - Concrete Hammer PCE-HT-75
US$ 975.00
ex. VAT, ex. delivery costs
Topseller

The PCE-HT-75 Surface Testing Hammer for concrete is easy to use and is fundamentally used in the construction industry as well as other industrial sectors (testing for Wickel hardness of rolls in commodities). This Surface Testing Hammer in the form of a hammer device for testing concrete is based on the Swiss principle of measurement.


  • Spring stretch: 75 ± 0.3 mm / 3 ± .01 in
  • Measuring range: 10 … 70 N/mm²
  • Energy: 0.735 J / 0.54 ft-lbs
  • Low strength concrete testing or Type L
  • Indication of measurement: 0 to 100 (without dimensions)
  • Maximum thickness of concrete (of the material): 70 cm

Surface Testing - Gloss Meter PCE-GM 80
US$ 975.00
ex. VAT, ex. delivery costs

The surface testing gloss meter is equipped with an external gloss sensor. The measuring surface of Ø 4.5 mm of the gloss meter also contributes significantly to being able to carry out measurements on small surfaces that are difficult to access.

  • Measurement geometry: 60°
  • Measuring range up to 1000 GU
  • Measuring surface: Ø 4.5 mm
  • Data storage: 1245 measured values
  • Interface: Micro USB

Tachometer PCE-LES 103UV-365-CTA-KIT
US$ 975.00
ex. VAT, ex. delivery costs
Analysing the movement of rotating machines is quick and easy with our UV Tachometer. The UV Tachometer is equipped with 3 high-power UVA LEDs, which together generate a light intensity of 202 μW/cm² at a distance of 30 cm. The Tachometer allows you to set the flash frequency in both FPM and Hz. 

  • 3 UVA high-performance LEDs
  • light colour: 365 ... 370 nm
  • flash frequency 60 ... 300000 FPM (flashes per minute)
  • accuracy: 0.003 %
  • digital pulse width modulation
  • phase shift - 360 ° ... + 360 °
  • quick adjustment via x2 and ÷2 key
  • intuitive control keys and clear display
  • pocket size
  • incl. crack detection agent 2-component paint spray
Absolute Moisture Meter for Wood PCE-WMH-3
US$ 969.00
ex. VAT, ex. delivery costs

PCE-WMH-3 is a portable handheld digital absolute moisture meter or analyzer used to measure the moisture content of wood. This hammer-style wood moisture analyzer features preset characteristic curves for measuring moisture in 270 different wood types.


  • Measuring range: 6 … 60 % moisture content
  • Accuracy: ±1 % (within 6 … 12 % range), ±2 % (13 … 28 %), ±2 % (29 … 60 %)
  • Resolution: 0.1 %

Absolute Moisture Meter PCE-W3
US$ 969.00
ex. VAT, ex. delivery costs

The Absolute Moisture Meter POCE-W3 is designed for professional use in the input control of large amounts of waste paper or containers of paper. The Absolute Moisture Meter can detect absolute humidity in waste paper in order to determine the exact humidity content in the collection centre or in the paper-making factory. All test instruments come manufacturer calibrated. ISO certification can be ordered as an option.


  • Test / Measurement range: 6 … 30 %
  • Resolution: 0.1 %
  • Accuracy: ±10 % of the measurement value
  • Long probes
  • Accurate measurement

Damp Meter for Wood PCE-WMH 3
US$ 969.00
ex. VAT, ex. delivery costs

PCE-WMH-3 is a portable handheld digital damp meter or analyzer used to measure the moisture content of wood. This hammer-style wood moisture analyzer features preset characteristic curves for measuring moisture in 270 different wood types.


  • Measuring range: 6 … 60 % moisture content
  • Accuracy: ±1 % (within 6 … 12 % range), ±2 % (13 … 28 %), ±2 % (29 … 60 %)
  • Resolution: 0.1 %

Damp Meter PCE-W 3
US$ 969.00
ex. VAT, ex. delivery costs

Absolute Moisture Meter PCE-W3 for waste paper. The Absolute Moisture Meter can detect absolute humidity in waste paper in order to determine the exact humidity content in the collection centre or in the paper-making factory. All test instruments come manufacturer calibrated. ISO certification can be ordered as an option.


  • Test / Measurement range: 6 … 30 %
  • Resolution: 0.1 %
  • Accuracy: ±10 % of the measurement value
  • Long probes
  • Accurate measurement

Environmental Meter for Wood PCE-WMH 3
US$ 969.00
ex. VAT, ex. delivery costs

The PCE-WMH-3 is an environmental meter or analyzer used to measure the moisture content of wood. This hammer-style environmental meter features preset characteristic curves for measuring moisture in 270 different wood types.


  • Measuring range: 6 … 60 % moisture content
  • Accuracy: ±1 % (within 6 … 12 % range), ±2 % (13 … 28 %), ±2 % (29 … 60 %)
  • Resolution: 0.1 %

Environmental Tester for Wood PCE-WMH 3
US$ 969.00
ex. VAT, ex. delivery costs

The PCE-WMH-3 is an environmental tester or analyzer used to measure the moisture content of wood. This hammer-style environmental tester features preset characteristic curves for measuring moisture in 270 different wood types.


  • Measuring range: 6 … 60 % moisture content
  • Accuracy: ±1 % (within 6 … 12 % range), ±2 % (13 … 28 %), ±2 % (29 … 60 %)
  • Resolution: 0.1 %

Humidity Detector for Wood PCE-WMH 3
US$ 969.00
ex. VAT, ex. delivery costs

PCE-WMH-3 is a portable handheld digital humidity detector used to measure the moisture content of wood. This hammer-style humidity detector features preset characteristic curves for measuring moisture in 270 different wood types.


  • Measuring range: 6 … 60 % moisture content
  • Accuracy: ±1 % (within 6 … 12 % range), ±2 % (13 … 28 %), ±2 % (29 … 60 %)
  • Resolution: 0.1 %

Humidity Detector PCE-W 3
US$ 969.00
ex. VAT, ex. delivery costs

Humidity detector for waste paper. The humidity detector can detect absolute humidity in waste paper in order to determine the exact humidity content in the collection centre or in the paper-making factory. All test instruments come manufacturer calibrated. ISO certification can be ordered as an option.


  • Test / Measurement range: 6 … 30 %
  • Resolution: 0.1 %
  • Accuracy: ±10 % of the measurement value
  • Long probes
  • Accurate measurement

Moisture Tester for Wood PCE-WMH-3
US$ 969.00
ex. VAT, ex. delivery costs

PCE-WMH-3 is a portable handheld digital moisture tester or analyzer used to measure the moisture content of wood. This hammer-style wood moisture analyzer features preset characteristic curves for measuring moisture in 270 different wood types.


  • Measuring range: 6 … 60 % moisture content
  • Accuracy: ±1 % (within 6 … 12 % range), ±2 % (13 … 28 %), ±2 % (29 … 60 %)
  • Resolution: 0.1 %

Timber Moisture Meter PCE-WMH-3
US$ 969.00
ex. VAT, ex. delivery costs

PCE-WMH-3 is a portable handheld digital timber moisture meter or analyzer used to measure the moisture content of wood. This hammer-style wood moisture analyzer features preset characteristic curves for measuring moisture in 270 different wood types.


  • Measuring range: 6 … 60 % moisture content
  • Accuracy: ±1 % (within 6 … 12 % range), ±2 % (13 … 28 %), ±2 % (29 … 60 %)
  • Resolution: 0.1 %

Wall Moisture Meter PCE-WMH-3
US$ 969.00
ex. VAT, ex. delivery costs

PCE-WMH-3 is a portable handheld digital wall moisture meter or analyzer used to measure the moisture content of wood. This hammer-style wall moisture analyzer features preset characteristic curves for measuring moisture in 270 different wood types.


  • Measuring range: 6 … 60 % moisture content
  • Accuracy: ±1 % (within 6 … 12 % range), ±2 % (13 … 28 %), ±2 % (29 … 60 %)
  • Resolution: 0.1 %