The Durometer is a handy, digital measuring device for measuring tensile and compressive forces. The Durometer offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

• Measuring range: 0 … 10 N
• Resolution: 0,002 N
• Accuracy: ± 0.3% of the measuring range
• Memory for 100 measurements
• USB interface
• Graphic display

• Measuring range: 0 … 10 m / 0 … 32.8 ft
• Accuracy: 0.5%
• Resolution: 0.001 m
• With display for setting and reading
• Stable M60 connection thread
• incl. external digital display PCE-N24S:
• Voltage supply: selectable
• Input signal: selectable
• Display: 4 digits, red
• Digit height: 20 mm / 0.78"

The ultrasonic level indicator is the ideal measuring device to determine the filling level of a silo. Thanks to the 4 … 20 mA output signal, the ultrasonic level indicator can also be connected to the operational process control.

• Measuring range: 0 … 10 m / 0 … 32.8 ft
• Accuracy: 0.5%
• Resolution: 0.001 m
• With display for setting and reading
• Stable M60 connection thread
• incl. external digital display PCE-N24S:
• Voltage supply: selectable
• Input signal: selectable
• Display: 4 digits, red
• Digit height: 20 mm / 0.78"

The level indicator is the ideal measuring device to determine the filling level of a silo. Thanks to the 4 … 20 mA output signal, the level indicator can also be connected to the operational process control.

• Measuring range: 0 … 10 m / 0 … 32.8 ft
• Accuracy: 0.5%
• Resolution: 0.001 m
• With display for setting and reading
• Stable M60 connection thread
• incl. external digital display PCE-N24S:
• Voltage supply: selectable
• Input signal: selectable
• Display: 4 digits, red
• Digit height: 20 mm / 0.78"

The panel meter is the ideal measuring device to determine the filling level of a silo. Thanks to the 4 … 20 mA output signal, the panel meter can also be connected to the operational process control.

• Measuring range: 0 … 10 m / 0 … 32.8 ft
• Accuracy: 0.5%
• Resolution: 0.001 m
• With display for setting and reading
• Stable M60 connection thread
• incl. external digital display PCE-N24S:
• Voltage supply: selectable
• Input signal: selectable
• Display: 4 digits, red
• Digit height: 20 mm / 0.78"

The PCE-DDA 10 Shore A durometer is a portable handheld device used to check Shore A hardness in soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).

• Portable handheld digital device
• For Shore A hardness testing
• Single and serial measurements
• Data transfer to PC

The force gauge is a handy, digital measuring device for measuring tensile and compressive forces. The force gauge offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

• Measuring range: 0 … 10 N
• Resolution: 0,002 N
• Accuracy: ± 0.3% of the measuring range
• Memory for 100 measurements
• USB interface
• Graphic display

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units. The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.

• Handheld device
• For Shore A measurements
• Single and Serial Measurements
• Data transfer to PC

The PCE-DDA 10 Shore A Material Tester is a portable handheld device used to check Shore A hardness in soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. This digital Material Tester has a reading accuracy of 0.1 hardness units. The Material Tester comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).

• Portable handheld digital device
• For Shore A hardness testing
• Single and serial measurements
• Data transfer to PC

The PCE-DDD 10 Shore D durometer is a portable handheld device used to check Shore D hardness in hard rubber and thermoplastic. This digital durometer has a reading accuracy of 0.1 hardness units. The durometer comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).

• Portable handheld digital device
• For Shore D hardness testing
• Single and serial measurements
• Data transfer to PC

The PCE-DDD 10 shore hardness tester and durometer is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.  The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.

• Handheld device
• For Shore D measurements
• Single and Serial Measurements
• Data transfer to PC

The PCE-DDA 10 shore hardness tester is an ergonomic device to check Shore hardness in gum, plastic and other non-metallic materials. It has been designed with a very high quality. The PCE-DDA 10 durometer is mainly used for soft gums, elastomers, natural rubber, neoprenes, casting resin, white PVC, leather, etc. It has a reading accuracy of 0.1 hardness units. The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.

• Handheld device
• For Shore A measurements
• Single and Serial Measurements
• Data transfer to PC

The PCE-DDD 10 Shore D Material Tester is a portable handheld device used to check Shore D hardness in hard rubber and thermoplastic. This digital Material Tester has a reading accuracy of 0.1 hardness units. The Material Tester comes manufacturer calibrated and can be optionally certified to ISO standards for an additional fee (see accessories for details).

• Portable handheld digital device
• For Shore D hardness testing
• Single and serial measurements
• Data transfer to PC

The PCE-DDD 10 shore hardness tester and durometer is an ergonomic device to check Shore D hardness in materials such as hard rubber and thermoplastic. It has been designed with a very high quality.  The durometer (as all test instruments) comes manufacturer calibrated and can additionally be lab certified to ISO standards.

• Handheld device
• For Shore D measurements
• Single and Serial Measurements
• Data transfer to PC

The wind speed meter  is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The wind speed meter has many different pressure measuring functions.

• Measuring range:
  ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The differential pressure gauge PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The differential pressure gauge PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The pressure meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The pressure meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The Flow Meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The Flow Meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The air flow meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The air flow meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The manometer PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The manometer PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

The differential pressure meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The differential pressure meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

• measurement range: 20 ... 130 dB
• resolution: 0.1 dB
• accuracy: ±1.5 dB
• measurement functions: HOLD, MAX, LEQ
• time weighting: F, S and I
• frequency weighting: A, C and Z
• frequency range: 20 ... 8000 Hz
• standards: IEC 61672-1 (class II)

The pitot pipe anemometer is a reliable differential pressure gauge for pressure measurement of air in the range of ±20 kPa. The Anemometer can be used in combination with various pitot pipes what makes the instrument very useful in air flow measurements of industrial plants.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable

• measurement range: 20 ... 130 dB
• resolution: 0.1 dB
• accuracy: ±1.5 dB
• measurement functions: HOLD, MAX, LEQ
• time weighting: F, S and I
• frequency weighting: A, C and Z
• frequency range: 20 ... 8000 Hz
• standards: IEC 61672-1 (class II)

• measurement range: 20 ... 130 dB
• resolution: 0.1 dB
• accuracy: ±1.5 dB
• measurement functions: HOLD, MAX, LEQ
• time weighting: F, S and I
• frequency weighting: A, C and Z
• frequency range: 20 ... 8000 Hz
• standards: IEC 61672-1 (class II)

The Air Velocity Meter PCE-PDA 10L is a reliable differential pressure gauge for pressure measurement of gases in the range of ±20 kPa. The Air Velocity Meter PCE-PDA 10L has many different pressure measuring functions.

• Measuring range: ± 20 kPa /± 2.9 psi / ± 0.2 bar
• Resolution: 10 Pa / 0.00145 psi / 0.0001 bar
• Accuracy: ± 0.5% of final value
• Min and Max value memory
• Data logger and leak test
• Temperature measurement, flow measurement
• Pitot tube not included in delivery / optionally selectable