PCE-WMM 50-ICA is a wall-mounted gas detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor air quality meter features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.

• CO2 gas measurement range: 0 … 50,000 ppm
• Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
• IP54-rated enclosure on sensor and remote display units
• 2 adjustable alarm thresholds
• 3- to 4-digit remote display (depends on range)
• incl. ISO Calibration Certificate

PCE-WMM 50-ICA is a wall-mounted carbon dioxide gas leak detector that uses diffusion to monitor carbon dioxide (CO2) gas levels and ambient temperature (ºC / ºF) indoors. This indoor carbon dioxide gas leak detector features an alarm-activated potential-free contact that can, for example, activate a fan to reduce CO2 gas concentration in the room.

• CO2 gas measurement range: 0 … 50,000 ppm
• Temperature measurement range: 0 … +45 ºC / +32 … +113 ºF
• IP54-rated enclosure on sensor and remote display units
• 2 adjustable alarm thresholds
• 3- to 4-digit remote display (depends on range)
• incl. ISO Calibration Certificate

The Gas Detector Gasman-CO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Detector fulfills all the European and international norms, even ATEX and UL standards.

• Non-rechargeable, 1-year battery
• For CO₂ (Carbon Dioxide)
• Dust and water resistant - IP 65/67
• 0… 5 % v/v

The Gas Leak Detector Gasman-CO2 is a unique gas meter which protects against a specific gas, inflammable or toxic. The Gas Leak Detector warns with a penetrating alarm and an optical signal (useful in case when there are loud noises in the surroundings) of the existence of dangerous gas concentrations and shows on screen the value of the gas measurement. The Gas Leak Detector fulfills all the European and international norms, even ATEX and UL standards.

• Non-rechargeable, 1-year battery
• For CO₂ (Carbon Dioxide)
• Dust and water resistant - IP 65/67
• 0… 5 % v/v

The PCE-VA 20-SET is a multi-functional humidity detector including flow hoods for assessing and balancing heating, ventilation and air conditioning or cooling (HVAC) installations. This multi-faceted anemometer-thermometer-hygrometer incorporates a 10 cm / 3.9" diam. fan impeller, easy-to-view backlit LCD, and useful functions, e.g. display hold, average val, maximum val, minimum val, auto power-off, low battery indication, and imperial/metric option.

• Measures air flow velocity, volume flow, relative humidity, air temperature, dew  point temperature and wet-bulb temperature
• Air flow velocity range: 0.2 … 30 m/s (39.4 … 5905.5 fpm)
• Accuracy: ±(1.5% of measured value + 0.3 m/s) when less than 20 m/s, ±(3% of  measured value + 0.3 m/s) when more than 20 m/s
• Resolution: 0.1°C / 0.18°F
• Includes 2 x capture hoods (1 x round 210 mm / 8.3 in Ø, 1 x square 346 x 346  mm / 13.6 x 13.6 in)
• incl. ISO Calibration Certificate

PCE-TUM 20 is a portable handheld photometer for water quality analysis. This photometer is equipped with a large LCD screen and user-friendly keyboard. The photometer features two automatically switching measuring ranges between 0 … 50 NTU and 50 … 1000 NTU for increased accuracy.

• 0 … 1000 NTU turbidity measuring range
• Infrared LED light source
• Calibration references included

The colorimeter is a handy device equipped with a large display, fulfilling all standards for a turbidity analysis on-site. The measuring range of 0 … 1000 NTU is separated into two automatically switching measuring ranges for purposes of increasing the accuracy of the Colorimeter.

• Measuring range: 0.00 to 50.0 NTU and 50 to 1000 NTU
• Resolution: 0.01 and 1 NTU
• Large LCD display 41 mm x 34 mm
• Real-time clock
• High accuracy
• ISO 7027 conformity
• Infrared turbidity measurement method

With the radiation detector PCE-EMF 40, it is possible to measure magnetic fields up to 2000 mG directly. At the same time, the radiation detector shows the strength of the magnetic field numerically using an X, Y and Z axis.

• Measuring ranges: 20.00 … 200.0 µT / 200.0 … 2000 mG
• Bandwidth: 50 MHz … 3.5 GHz
• Units: V / m, mV / m, V / m, µW / cm², µW / m², mW / m², mA / m

The data-logging humidity detector is used to measure indoor / outdoor wet bulb globe temperature (WBGT), black globe temperature (TG), wet bulb temperature (WB), dew point temperature, air temperature (TA) and relative humidity. Thus, this multipurpose data-recording humidity detector is an ideal tool for evaluating heat stress risks in different work environments.

• Programmable WBGT alarm setting with audible and visual alerts
• Manual (push-button) or automatic (adjustable 1 … 3600 sec) sampling
• SD card memory (1 … 16 GB) allows for quick and easy data transfer to a PC

The PCE-TUM 20 is a portable handheld turbidity meter or turbidimeter for water quality analysis. This turbidity measuring device is equipped with a large LCD screen and user-friendly keyboard. The turbidity meter features two automatically switching measuring ranges between 0 … 50 NTU and 50 … 1000 NTU for increased accuracy.

• 0 … 1000 NTU turbidity measuring range
• Infrared LED light source
• Calibration references included

• temperature: -20 °C ... +400 °C
• resolution: 0.1 °C
• accuracy >0 °C: ±2 °C or ±2 %
• accuracy ≤0 °C: ±5 °C or ±5 %
• storage medium: internal, micro SD card
• file format: .bmp
• camera: 120 x 90 pixels

The Durometer is a handy, digital measuring device for measuring tensile and compressive forces. The Durometer offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

• Measuring range: 0 … 20 N
• Resolution: 0.005 N
• Accuracy: ± 0.3% of the measuring range
• Memory for 100 measurements
• USB interface
• Graphic display

The force gage is a handy, digital measuring device for measuring tensile and compressive forces. The force gage offers a sampling rate of 500 Hz and various measurement options such as real-time measurement (RT), maximum value measurement (PEAK), configurable average value acquisition (Average) and automatic measurement storage of up to 100 measurements.

• Measuring range: 0 … 20 N
• Resolution: 0.005 N
• Accuracy: ± 0.3% of the measuring range
• Memory for 100 measurements
• USB interface
• Graphic display

• temperature: -20 °C ... +400 °C
• resolution: 0.1 °C
• accuracy >0 °C: ±2 °C or ±2 %
• accuracy ≤0 °C: ±5 °C or ±5 %
• storage medium: internal, micro SD card
• file format: .bmp
• camera: 120 x 90 pixels

• temperature: -20 °C ... +400 °C
• resolution: 0.1 °C
• accuracy >0 °C: ±2 °C or ±2 %
• accuracy ≤0 °C: ±5 °C or ±5 %
• storage medium: internal, micro SD card
• file format: .bmp
• camera: 120 x 90 pixels

• temperature: -20 °C ... +400 °C
• resolution: 0.1 °C
• accuracy >0 °C: ±2 °C or ±2 %
• accuracy ≤0 °C: ±5 °C or ±5 %
• storage medium: internal, micro SD card
• file format: .bmp
• camera: 120 x 90 pixels