Query results | PCE Instruments

US$ 8,127.00

ex. VAT, ex. delivery costs

The vehicle weighing pads fulfill the measuring accuracy of class III described in 2009/23 / EG. The vehicle weighing pads are delivered in calibrated form and, thanks to the proof of measurement accuracy, comply with the SOLAS regulation for weighing containers with 4 support points.

Weighing range up to max. 50t (12.5t per corner)
10 m / 32.8 ft cable connection
4 platforms each 500 x 400 x 58 mm / 19.6 x 15.7 x 2.2"
Including calibration certificate / certificate of conformity

Particle Counter PCE-PQC 20EU Incl. Calibration Certificate

US$ 7,999.00

ex. VAT, ex. delivery costs

The particle counter PCE-PQC 20EU is very well suited for monitoring and checking of clean rooms, filter systems in operating rooms and filling systems in the pharmaceutical industry. The stored data records from the particle counter PCE-PQC 20EU can be read out and processed via the supplied software via Ethernet, USB or Wifi.

Measuring range: 0.3 … 25 μm
Measurement channel sizes: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm
Counting efficiency: 50% at 0.3 μm, 100% at > 0.45 μm according to JIS
Ethernet, USB
Incl. temperature and humidity sensor
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Particle Counter PCE-PQC 21EU Incl. Calibration Certificate

US$ 7,867.00

ex. VAT, ex. delivery costs

The particle counter PCE-PQC 21EU is a portable detection system that can count particles of certain sizes in the air. Furthermore, the air temperature and the relative humidity are monitored.

Measuring range: 0.5 … 25 μm
Measurement channel sizes: 0.5, 0.7, 1.0, 3.0, 5.0, 10.0 μm
Counting efficiency: 50% at 0.5 μm, 100% at > 0.75 μm according to JIS
Ethernet, USB
Incl. temperature and humidity sensor
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Condition Monitoring Material Hardness Tester PCE-5000

US$ 7,797.00

ex. VAT, ex. delivery costs

The PCE-5000 is a portable condition monitoring material hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
Memory size: 1,000 groups for measurement data and 20 groups for calibration data
Different probe types (also automatic motorized probes) available

Material Hardness Tester PCE-5000

US$ 7,797.00

ex. VAT, ex. delivery costs

PCE-5000 is a portable material hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
Memory size: 1,000 groups for measurement data and 20 groups for calibration data
Different probe types (also automatic motorized probes) available

Metal Hardness Tester PCE-5000

US$ 7,797.00

ex. VAT, ex. delivery costs

Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
Memory size: 1,000 groups for measurement data and 20 groups for calibration data
Different probe types (also automatic motorized probes) available

NDT Test Instruments PCE-5000

US$ 7,797.00

ex. VAT, ex. delivery costs

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in Non-destructive testing produces microscopic indentation.

Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
Memory size: 1,000 groups for measurement data and 20 groups for calibration data
Different probe types (also automatic motorized probes) available

UCI Durometer PCE-5000

US$ 7,797.00

ex. VAT, ex. delivery costs

PCE-5000 is a portable hardness tester or durometer that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys to measure on a minimum material thickness of 2 mm / .08 in. The test instrument can be mounted on a test stand (as an option) for series measurement in manufacturing process checking. Non-destructive testing produces microscopic indentation.

Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
Memory size: 1,000 groups for measurement data and 20 groups for calibration data
Different probe types (also automatic motorized probes) available

UCI Hardness Tester PCE-5000

US$ 7,797.00

ex. VAT, ex. delivery costs

Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
Memory size: 1,000 groups for measurement data and 20 groups for calibration data
Different probe types (also automatic motorized probes) available

Ultrasonic / UCI Hardness Tester PCE-5000

US$ 7,797.00

ex. VAT, ex. delivery costs

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
Memory size: 1,000 groups for measurement data and 20 groups for calibration data
Different probe types (also automatic motorized probes) available

Ultrasonic testing device PCE-5000

US$ 7,797.00

ex. VAT, ex. delivery costs

PCE-5000 is a Ultrasonic testing device that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
Memory size: 1,000 groups for measurement data and 20 groups for calibration data
Different probe types (also automatic motorized probes) available

Absolute Moisture Sensor PCE-MWM 220

US$ 7,731.00

ex. VAT, ex. delivery costs

Moisture sensor for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture sensor for liquid materials has a processing unit with RS232/RS485 interfaces.

Measurement range: 0 … 100 %
Temperature range: +5 … +80 °C (+41 … +176 °F)

Humidity Detector PCE-MWM 220

US$ 7,731.00

ex. VAT, ex. delivery costs

Humidity Detector for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The humidity detector for liquid materials has a processing unit with RS232/RS485 interfaces.

Measurement range: 0 … 100 %
Temperature range: +5 … +80 °C (+41 … +176 °F)

Liquid Material Moisture Analyzer PCE-MWM 220

US$ 7,731.00

ex. VAT, ex. delivery costs

Moisture analyzers for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture analyzer for liquid materials has a processing unit with RS232/RS485 interfaces.

Measurement range: 0 … 100 %
Limits of permissible absolute error of the measurements: Δ= 0,035 +0,05·W
Temperature measurement range: -40 … +150 °C

Moisture Meter PCE-MWM 220

US$ 7,731.00

ex. VAT, ex. delivery costs

Moisture meter for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture meter for liquid materials has a processing unit with RS232/RS485 interfaces.

Measurement range: 0 … 100 %
Limits of permissible absolute error of the measurements: Δ= 0,035 +0,05·W
Temperature measurement range: -40 … +150 °C

Moisture Sensor PCE-MWM 220

US$ 7,731.00

ex. VAT, ex. delivery costs

Measurement range: 0 … 100 %
Limits of permissible absolute error of the measurements: Δ = 0,035 +0,05·W
Temperature measurement range: -40 … +150 °C

Moisture Test Instrument PCE-MWM 220

US$ 7,731.00

ex. VAT, ex. delivery costs

Moisture analyzer for liquid materials are used in boiler installations, water-dosing and diesel oil emulsion dispersion systems. The scope of supply can include the control cabinet to operate the valves regulating water feed. The moisture Analyzer for liquid materials has a processing unit with RS232/RS485 interfaces.

Measurement range: 0 … 100 % moisture in pumped liquids
Absolute error of the measurement: Δ= 0,035 +0,05·W
Temperature measurement range: -40 … +150 °C

Color Meter / Colour Meter PCE-CSM 20-ICA incl. ISO-Calibration Certificate

US$ 7,507.00

ex. VAT, ex. delivery costs

PCE-CSM 20 is a handheld Color Meter / Colour Meter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the Color Meter / Colour Meter offers a long battery life, a 4-color lamp and an easy-to-use portable design. The Color Meter / Colour Meter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

Measuring geometry: 8° / d
Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
USB cable and software for data transfer
2,000 reference standard memory, 20,000 sample memory
Light source: D65, A, C, D50
Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B
incl. ISO-Calibration Certificate

Colorimeter PCE-CSM 20-ICA incl. ISO-Calibration Certificate

US$ 7,507.00

ex. VAT, ex. delivery costs

PCE-CSM 20 is a handheld Colorimeter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the Colorimeter offers a long battery life, a 4-color lamp and an easy-to-use portable design. The Colorimeter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

Measuring geometry: 8° / d
Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
USB cable and software for data transfer
2,000 reference standard memory, 20,000 sample memory
Light source: D65, A, C, D50
Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B
incl. ISO-Calibration Certificate

IoT Meter / IoT Sensor PCE-CSM 20-ICA incl. ISO-Calibration Certificate

US$ 7,507.00

ex. VAT, ex. delivery costs

PCE-CSM 20 is a handheld IoT Meter / IoT Sensor used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the IoT Meter / IoT Sensor offers a long battery life, a 4-color lamp and an easy-to-use portable design. The IoT Meter / IoT Sensor covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

Measuring geometry: 8° / d
Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
USB cable and software for data transfer
2,000 reference standard memory, 20,000 sample memory
Light source: D65, A, C, D50
Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B
incl. ISO-Calibration Certificate

Paint Testing Equipment PCE-CSM 20-ICA incl. ISO-Calibration Certificate

US$ 7,507.00

ex. VAT, ex. delivery costs

PCE-CSM 20 is a handheld Paint Testing Equipment used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the Paint Testing Equipment offers a long battery life, a 4-color lamp and an easy-to-use portable design. The Paint Testing Equipment covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

Measuring geometry: 8° / d
Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
USB cable and software for data transfer
2,000 reference standard memory, 20,000 sample memory
Light source: D65, A, C, D50
Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B
incl. ISO-Calibration Certificate

Spectrophotometer PCE-CSM 20-ICA incl. ISO-Calibration Certificate

US$ 7,507.00

ex. VAT, ex. delivery costs

PCE-CSM 20 is a handheld Spectrophotometer used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the Spectrophotometer offers a long battery life, a 4-color lamp and an easy-to-use portable design. The Spectrophotometer covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

Measuring geometry: 8° / d
Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
USB cable and software for data transfer
2,000 reference standard memory, 20,000 sample memory
Light source: D65, A, C, D50
Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B
incl. ISO-Calibration Certificate

AW Tester PCE-WAM 60

US$ 7,472.00

ex. VAT, ex. delivery costs

The AW tester enables the simultaneous or separate measurement of water activity on 4 channels. It measures water activity within a range from 0 ... 1 aw and temperature from -10 ... 50°C / 14 ... 122°F. Our meter is equipped with a 7" touchscreen that displays the data in real time and saves it for later analysis. Results, graphs and measurement data can be called up at any time in the AW tester.

Water activity: 0 ... 1 aw
Resolution: 0.0001 aw
Accuracy: ±0.01 aw (10 ... 30°C / 50 ... 86°F)
Temperature: -10 ... 50°C / 14 ... 122°F
External measuring cell
Up to 4 aw sensors simultaneously
Integrated printer
Memory: 65535 data records per channel
Real-time display of the measurement curve
7" LCD touch display
Incl. software

Food Hygiene / Hygiene Test Equipment PCE-WAM 60

US$ 7,472.00

ex. VAT, ex. delivery costs

The Food Hygiene / Hygiene Test Equipment enables the simultaneous or separate measurement of water activity on 4 channels. It measures water activity within a range from 0 ... 1 aw and temperature from -10 ... 50°C / 14 ... 122°F. Our meter is equipped with a 7" touchscreen that displays the data in real time and saves it for later analysis. Results, graphs and measurement data can be called up at any time in the Food Hygiene / Hygiene Test Equipment.

Water activity: 0 ... 1 aw
Resolution: 0.0001 aw
Accuracy: ±0.01 aw (10 ... 30°C / 50 ... 86°F)
Temperature: -10 ... 50°C / 14 ... 122°F
External measuring cell
Up to 4 aw sensors simultaneously
Integrated printer
Memory: 65535 data records per channel
Real-time display of the measurement curve
7" LCD touch display
Incl. software

Humidity Detector PCE-WAM 60

US$ 7,472.00

ex. VAT, ex. delivery costs

The Humidity Detector enables the simultaneous or separate measurement of water activity on 4 channels. It measures water activity within a range from 0 ... 1 aw and temperature from -10 ... 50°C / 14 ... 122°F. Our meter is equipped with a 7" touchscreen that displays the data in real time and saves it for later analysis. Results, graphs and measurement data can be called up at any time in the Humidity Detector.

Water activity: 0 ... 1 aw
Resolution: 0.0001 aw
Accuracy: ±0.01 aw (10 ... 30°C / 50 ... 86°F)
Temperature: -10 ... 50°C / 14 ... 122°F
External measuring cell
Up to 4 aw sensors simultaneously
Integrated printer
Memory: 65535 data records per channel
Real-time display of the measurement curve
7" LCD touch display
Incl. software

Hygiene Tester PCE-WAM 60

US$ 7,472.00

ex. VAT, ex. delivery costs

The Hygiene Tester enables the simultaneous or separate measurement of water activity on 4 channels. It measures water activity within a range from 0 ... 1 aw and temperature from -10 ... 50°C / 14 ... 122°F. Our meter is equipped with a 7" touchscreen that displays the data in real time and saves it for later analysis. Results, graphs and measurement data can be called up at any time in the Hygiene Tester.

Water activity: 0 ... 1 aw
Resolution: 0.0001 aw
Accuracy: ±0.01 aw (10 ... 30°C / 50 ... 86°F)
Temperature: -10 ... 50°C / 14 ... 122°F
External measuring cell
Up to 4 aw sensors simultaneously
Integrated printer
Memory: 65535 data records per channel
Real-time display of the measurement curve
7" LCD touch display
Incl. software

Moisture Analyzer / Moisture Analyzer PCE-WAM 60

US$ 7,472.00

ex. VAT, ex. delivery costs

The Moisture Analyzer / Moisture Analyzer enables the simultaneous or separate measurement of water activity on 4 channels. It measures water activity within a range from 0 ... 1 aw and temperature from -10 ... 50°C / 14 ... 122°F. Our meter is equipped with a 7" touchscreen that displays the data in real time and saves it for later analysis. Results, graphs and measurement data can be called up at any time in the Moisture Analyzer / Moisture Analyzer.

Water activity: 0 ... 1 aw
Resolution: 0.0001 aw
Accuracy: ±0.01 aw (10 ... 30°C / 50 ... 86°F)
Temperature: -10 ... 50°C / 14 ... 122°F
External measuring cell
Up to 4 aw sensors simultaneously
Integrated printer
Memory: 65535 data records per channel
Real-time display of the measurement curve
7" LCD touch display
Incl. software

Moisture Meter PCE-WAM 60

US$ 7,472.00

ex. VAT, ex. delivery costs

The Moisture Meter enables the simultaneous or separate measurement of water activity on 4 channels. It measures water activity within a range from 0 ... 1 aw and temperature from -10 ... 50°C / 14 ... 122°F. Our meter is equipped with a 7" touchscreen that displays the data in real time and saves it for later analysis. Results, graphs and measurement data can be called up at any time in the Moisture Meter.

Water activity: 0 ... 1 aw
Resolution: 0.0001 aw
Accuracy: ±0.01 aw (10 ... 30°C / 50 ... 86°F)
Temperature: -10 ... 50°C / 14 ... 122°F
External measuring cell
Up to 4 aw sensors simultaneously
Integrated printer
Memory: 65535 data records per channel
Real-time display of the measurement curve
7" LCD touch display
Incl. software

Particle Counter PCE-PQC 10EU (ISO 21501-4)

US$ 7,431.00

ex. VAT, ex. delivery costs

The particle counter PCE-PQC 10EU detects quickly where eg particles, air particles contaminate the air and can cause diseases such as asthma, bronchitis, skin and lung diseases.

Measuring range: 0.3 … 25 μm
Measuring channel sizes: 0.3, 0.5, 1.0, 2.5, 5.0, 10.0 μm
Counting efficiency: 50% at 0.3 μm 100% at > 0.45 μm according to JIS
ISO 14644-1, EU GMP Annex I, FS 209E
Mass concentration
Ethernet, USB
Incl. temperature and humidity sensor
Incl. calibration certificate traceable to NIST ISO 21501-4 and JIS B9921

Condition Monitoring Slow Motion Camera PCE-HSC 1660

US$ 7,425.00

ex. VAT, ex. delivery costs

The Condition Monitoring Slow Motion Camera is suitable for simple slow motion recordings in industry and research. With the Condition Monitoring Slow Motion Camera, film recordings can be made at a frame rate of 2420 frames per second. This Condition Monitoring Slow Motion Camera is distinguished by its compact design and ease of use.

CMOS: 1.3 megapixels
Max. resolution: 1280 x 1024
2420 frames per second
USB 3.0
Can be controlled directly via PC
Battery life approx. 150 minutes
Slow motion function

High-Speed Camera PCE-HSC 1660

US$ 7,425.00

ex. VAT, ex. delivery costs

The high-speed camera PCE-HSC 1660 is suitable for simple slow motion recordings in industry and research. With the high-speed camera, film recordings can be made at a frame rate of 2420 frames per second. This slow motion camera is distinguished by its compact design and ease of use.

CMOS: 1.3 megapixels
Max. resolution: 1280 x 1024
2420 frames per second
USB 3.0
Can be controlled directly via PC
Battery life approx. 150 minutes
Slow motion function

High-Speed Inspection Camera PCE-HSC 1660

US$ 7,425.00

ex. VAT, ex. delivery costs

The high-speed inspection camera PCE-HSC 1660 is suitable for simple slow motion recordings in industry and research. With the high-speed inspection camera, film recordings can be made at a frame rate of 2420 frames per second. This slow motion inspection camera is distinguished by its compact design and ease of use.

CMOS: 1.3 megapixels
Max. resolution: 1280 x 1024
2420 frames per second
USB 3.0
Can be controlled directly via PC
Battery life approx. 150 minutes
Slow motion function

Material Tester PCE-TCT 100

US$ 7,425.00

ex. VAT, ex. delivery costs

The Material Tester is a special device for checking torque wrenches. A direction of rotation indicator also provides immediate feedback on the current direction of movement. Equipped with a real-time curve function, the Material Tester displays torque values directly on the 7-inch touchscreen, enabling visual monitoring of the measurement data in real time.

torque: 0.01 ... 100 Nm
accuracy: ±1 % of Rd
real-time curve
display of the direction of rotation
units Nm, kgf cm, lbf in
USB interface
adjustable limit values
peak hold
7-inch touchscreen

Test Stand PCE-TCT 100

US$ 7,425.00

ex. VAT, ex. delivery costs

The Test Stand is a special device for checking torque wrenches. A direction of rotation indicator also provides immediate feedback on the current direction of movement. Equipped with a real-time curve function, the Test Stand displays torque values directly on the 7-inch touchscreen, enabling visual monitoring of the measurement data in real time.

torque: 0.01 ... 100 Nm
accuracy: ±1 % of Rd
real-time curve
display of the direction of rotation
units Nm, kgf cm, lbf in
USB interface
adjustable limit values
peak hold
7-inch touchscreen

Torque Meter PCE-TCT 100

US$ 7,425.00

ex. VAT, ex. delivery costs

The Torque Meter is a special device for checking torque wrenches. A direction of rotation indicator also provides immediate feedback on the current direction of movement. Equipped with a real-time curve function, the Torque Meter displays torque values directly on the 7-inch touchscreen, enabling visual monitoring of the measurement data in real time.

torque: 0.01 ... 100 Nm
accuracy: ±1 % of Rd
real-time curve
display of the direction of rotation
units Nm, kgf cm, lbf in
USB interface
adjustable limit values
peak hold
7-inch touchscreen

Universal Testing Machine PCE-TCT 100

US$ 7,425.00

ex. VAT, ex. delivery costs

The Universal Testing Machine is a special device for checking torque wrenches. A direction of rotation indicator also provides immediate feedback on the current direction of movement. Equipped with a real-time curve function, the Universal Testing Machine displays torque values directly on the 7-inch touchscreen, enabling visual monitoring of the measurement data in real time.

torque: 0.01 ... 100 Nm
accuracy: ±1 % of Rd
real-time curve
display of the direction of rotation
units Nm, kgf cm, lbf in
USB interface
adjustable limit values
peak hold
7-inch touchscreen