The legal for trade scale was designed for mobile use on tables. It is equipped with a display tripod that can be folded up in a few simple steps without tools. The conformity assessment, which replaces the first verification, is carried out for the largest possible geographical area around the planned installation site of the legal for trade scale.

• Measuring range [Max]: 60 kg / 132 lb
• Calibration value [e]: 20 g / 0.7 oz
• Usable area [WxD]: 45 x 42 cm / 17.7 x 16.5"
• Collapsible tripod
• Incl. verification (conformity-assessed)
• Interface: USB-B (bidirectional)

The platform scale was designed for mobile use on tables. It is equipped with a display tripod that can be folded up in a few simple steps without tools. The conformity assessment, which replaces the first verification, is carried out for the largest possible geographical area around the planned installation site of the scale.

• Measuring range [Max]: 60 kg / 132 lb
• Calibration value [e]: 20 g / 0.7 oz
• Usable area [WxD]: 45 x 42 cm / 17.7 x 16.5"
• Collapsible tripod
• Incl. verification (conformity-assessed)
• Interface: USB-B (bidirectional)

The trade approved scale was designed for mobile use on tables. It is equipped with a display tripod that can be folded up in a few simple steps without tools. The conformity assessment, which replaces the first verification, is carried out for the largest possible geographical area around the planned installation site of the trade approved scale.

• Measuring range [Max]: 60 kg / 132 lb
• Calibration value [e]: 20 g / 0.7 oz
• Usable area [WxD]: 45 x 42 cm / 17.7 x 16.5"
• Collapsible tripod
• Incl. verification (conformity-assessed)
• Interface: USB-B (bidirectional)

Air flow meter with 0 … 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Air flow meter with 0 … 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Air velocity meter with 0 … 10 V output. Air velocity meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Anemometer with 0 … 10 V output. Anemometer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Climate meter with 0 … 10 V output. Climate meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Environmental meter with 0 … 10 V output. Environmental meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Environmental tester with 0 … 10 V output. Environmental tester for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Weather station with 0 … 10 V output. Weather station for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Wind measurer with 0 … 10 V output. Wind measurer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Wind speed alarm / wind alarm controller with 0 … 10 V output. Wind speed alarm / wind alarm controller for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Wind speed meter with 0 … 10 V output. Wind speed meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

PCE-CS 300 is a digital, battery-powered Crane Scale for indoor use. The rugged design of the Crane Scale accommodates applications in rough industrial conditions as well as in fields such as food and hygiene.

• Maximum capacity: 300 kg / 661.39 lb
• Readability: 0.05 kg / 0.11 lbs
• TARE: Full range
• Power off screen reminder after 30 minutes of inactivity
• incl. ISO Calibration Certificate

The differential pressure manometer PCE-P05-ICA is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The differential pressure manometer is particularly suitable for the complete documentation of your measuring tasks.

• Measuring range from -344 … +344 mbar
• Parameters:inH2O, psi, mbar, kPa, inHg, mmHg,   ozin², ftH2O, cmH2O, kgcm², bar
• Backlight can be switched on/off
• Software with USB cable included
• Incl. ISO calibration certificate

The differential pressure meter PCE-P05-ICA is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The differential pressure meter is particularly suitable for the complete documentation of your measuring tasks.

• Measuring range from -344 … +344 mbar
• Parameters:inH2O, psi, mbar, kPa, inHg, mmHg,   ozin², ftH2O, cmH2O, kgcm², bar
• Backlight can be switched on/off
• Software with USB cable included
• Incl. ISO calibration certificate