Air flow meter with 0 … 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Air flow meter with 0 … 10 V output. Air flow meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Air velocity meter with 0 … 10 V output. Air velocity meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Anemometer with 0 … 10 V output. Anemometer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Climate meter with 0 … 10 V output. Climate meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

The differential pressure manometer PCE-P05-ICA is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The differential pressure manometer is particularly suitable for the complete documentation of your measuring tasks.

• Measuring range from -344 … +344 mbar
• Parameters:inH2O, psi, mbar, kPa, inHg, mmHg,   ozin², ftH2O, cmH2O, kgcm², bar
• Backlight can be switched on/off
• Software with USB cable included
• Incl. ISO calibration certificate

The differential pressure meter PCE-P05-ICA is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The differential pressure meter is particularly suitable for the complete documentation of your measuring tasks.

• Measuring range from -344 … +344 mbar
• Parameters:inH2O, psi, mbar, kPa, inHg, mmHg,   ozin², ftH2O, cmH2O, kgcm², bar
• Backlight can be switched on/off
• Software with USB cable included
• Incl. ISO calibration certificate

Environmental meter with 0 … 10 V output. Environmental meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Environmental tester with 0 … 10 V output. Environmental tester for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

The HVAC meter PCE-P05-ICA is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The HVAC differential pressure meter is particularly suitable for the complete documentation of your measuring tasks.

• Measuring range from -344 … +344 mbar
• Parameters:inH2O, psi, mbar, kPa, inHg, mmHg,   ozin², ftH2O, cmH2O, kgcm², bar
• Backlight can be switched on/off
• Software with USB cable included
• Incl. ISO calibration certificate

The pressure gauge PCE-P05-ICA is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The differential pressure gauge is particularly suitable for the complete documentation of your measuring tasks.

• Measuring range from -344 … +344 mbar
• Parameters:inH2O, psi, mbar, kPa, inHg, mmHg,   ozin², ftH2O, cmH2O, kgcm², bar
• Backlight can be switched on/off
• Software with USB cable included
• Incl. ISO calibration certificate

The pressure meter PCE-P05-ICA is a robust, compact and comprehensive differential pressure measuring device for measuring pressure in 11 adjustable units. The differential pressure meter is particularly suitable for the complete documentation of your measuring tasks.

• Measuring range from -344 … +344 mbar
• Parameters:inH2O, psi, mbar, kPa, inHg, mmHg,   ozin², ftH2O, cmH2O, kgcm², bar
• Backlight can be switched on/off
• Software with USB cable included
• Incl. ISO calibration certificate

Weather station with 0 … 10 V output. Weather station for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Wind measurer with 0 … 10 V output. Wind measurer for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Wind speed alarm / wind alarm controller with 0 … 10 V output. Wind speed alarm / wind alarm controller for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

Wind speed meter with 0 … 10 V output. Wind speed meter for measuring the horizontal wind speed with an analog output signal. The cup cross of the anemometer is made of plastic, the housing is made of aluminum and anodized. The device has a Pg 21 threaded pin with 2 nuts for mounting.

• Measuring range: 0 … 50 m/s
• Output signal: 0 … 10 V
• Mounting: Pipe mounting / mounting via PG screw connection
• Heating: yes

The Ozone meter / base unit AQ-FM S900 is used to measure and control gas concentrations, and can communicate with a variety of hardware systems. The transmitter can also be used as switching relays with user-set values, as 4-20 mA output gas transmitter and it can communicate with a network via the RS485 interface. Changing sensor heads is quick and easy, no configuration changes required. Calibration certificate included.

• Analog Output: 4-20 mA (optional isolated), 10… 30V
• External control signal: Min Max. Alarm, control and diagnostics
• Power supply: 12V DC 1A supply is not supplied but required
• Interface: RS485Attention! No AQ sensor head is included in the delivery, it must be ordered separately as an accessory!

• Continuous data output
• Contactless measurement range: 5 … 99,999 RPM
• Contact measurement range: 0.5 … 19,999 RPM
• Surface measurement range: 0.05 … 1,999.9 m/min
• Measuring distance without contact: 5 … 150 cm / 1.9" … 4.9 ft
• Incl. ISO calibration certificate

The automotive tester is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the automotive tester is inductive. To do this, the supply line is placed in the automotive tester.

• Measuring range: 0 … 1500 V AC/DC
• Free app for Android and iOS
• Data logging for up to 100,000 measured values
• Inrush current measurement
• Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V

The car measuring device is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the car measuring device is inductive. To do this, the supply line is placed in the car measuring device.

• Measuring range: 0 … 1500 V AC/DC
• Free app for Android and iOS
• Data logging for up to 100,000 measured values
• Inrush current measurement
• Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V

The clamp meter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the clamp meter is inductive. To do this, the supply line is placed in the clamp meter.

• Measuring range: 0 … 1500 V AC/DC
• Free app for Android and iOS
• Data logging for up to 100,000 measured values
• Inrush current measurement
• Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V

The clamp meter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the clamp meter is inductive. To do this, the supply line is placed in the clamp meter.

• Measuring range: 0 … 1500 V AC/DC
• Free app for Android and iOS
• Data logging for up to 100,000 measured values
• Inrush current measurement
• Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V

The clamp on tester is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the clamp on tester is inductive. To do this, the supply line is placed in the clamp on tester.

• Measuring range: 0 … 1500 V AC/DC
• Free app for Android and iOS
• Data logging for up to 100,000 measured values
• Inrush current measurement
• Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V

With this coating thickness gauge, layer thicknesses on metallic surfaces can be reliably determined. The coating thickness gauge has a measuring range of 1500 µm. This means that the coating thickness gauge is used, for example, in a paint shop, for incoming goods inspection or for an expert.

• Measuring range up to 1500 µm
• Measurable substrates: Fe, NFe
• Probe: internal
• Micro USB and Bluetooth interface
• Data storage for up to 600 measured values

The current clamp is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the current clamp is inductive. To do this, the supply line is placed in the current clamp.

• Measuring range: 0 … 1500 V AC/DC
• Free app for Android and iOS
• Data logging for up to 100,000 measured values
• Inrush current measurement
• Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V

The digital multimeter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the digital multimeter is inductive. To do this, the supply line is placed in the digital multimeter.

• Measuring range: 0 … 1500 V AC/DC
• Free app for Android and iOS
• Data logging for up to 100,000 measured values
• Inrush current measurement
• Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V

The electrical tester is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the electrical tester is inductive. To do this, the supply line is placed in the electrical tester.

• Measuring range: 0 … 1500 V AC/DC
• Free app for Android and iOS
• Data logging for up to 100,000 measured values
• Inrush current measurement
• Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V

The HVAC meter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the HVAC meter is inductive. To do this, the supply line is placed in the HVAC meter.

• Measuring range: 0 … 1500 V AC/DC
• Free app for Android and iOS
• Data logging for up to 100,000 measured values
• Inrush current measurement
• Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V