Query results | PCE Instruments

US$ 418.00

ex. VAT, ex. delivery costs

The accelerometer is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this accelerometer, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

Frequency range: 10 Hz … 1 kHz
Measures speed, distance, acceleration in metric units only
Holds the reading after each measurement
Easy to handle and battery operated
Standard probe: 10 mm
including magnetic sensor

Condition Monitoring Vibration Meter PCE-VT 1100M

US$ 418.00

ex. VAT, ex. delivery costs

The condition monitoring vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this condition monitoring vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

Frequency range: 10 Hz … 1 kHz
Measures speed, distance, acceleration in metric units only
Holds the reading after each measurement
Easy to handle and battery operated
Standard probe: 10 mm
including magnetic sensor

HVAC Meter PCE-VT 1100M

US$ 418.00

ex. VAT, ex. delivery costs

The HVAC meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this HVAC meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

Frequency range: 10 Hz … 1 kHz
Measures speed, distance, acceleration in metric units only
Holds the reading after each measurement
Easy to handle and battery operated
Standard probe: 10 mm
including magnetic sensor

Vibration Analyzer PCE-VT 1100M

US$ 418.00

ex. VAT, ex. delivery costs

The vibration analyzer is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration analyzer, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

Frequency range: 10 Hz … 1 kHz
Measures speed, distance, acceleration in metric units only
Holds the reading after each measurement
Easy to handle and battery operated
Standard probe: 10 mm
including magnetic sensor

Vibration Meter PCE-VT 1100M

US$ 418.00

ex. VAT, ex. delivery costs

The vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on site. Thus, corresponding changes can be made directly on site after the measurement.

Frequency range: 10 Hz … 1 kHz
Easy to handle and battery operated
Standard probe: 10 mm
including magnetic sensor

PT-N Internal nFE sensor (0 ... 1500 µm)

US$ 415.00

ex. VAT, ex. delivery costs

PT-NInternal nFEsensor(0… 1500microns)

Clamp Meter PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 414.00

ex. VAT, ex. delivery costs

With the Clamp Meter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Clamp Meter captures these currents and displays them on the display.

Measurable electrical parameters: AC V, AC A, resistance
Clamp diameter: 30 mm
Operating temperature: -10 … 50°C / 50 … 122°F
Current consumption: 10-mA
Incl. ISO calibration certificate

Clamp on Tester PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 414.00

ex. VAT, ex. delivery costs

With the Clamp on Tester, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Clamp on Tester captures these currents and displays them on the display.

Measurable electrical parameters: AC V, AC A, resistance
Clamp diameter: 30 mm
Operating temperature: -10 … 50°C / 50 … 122°F
Current consumption: 10-mA
Incl. ISO calibration certificate

Current Clamp PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 414.00

ex. VAT, ex. delivery costs

With the Current Clamp it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Current Clamp captures these currents and displays them on the display.

Measurable electrical parameters: AC V, AC A, resistance
Clamp diameter: 30 mm
Operating temperature: -10 … 50°C / 50 … 122°F
Current consumption: 10-mA
Incl. ISO calibration certificate

Digital Multimeter PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 414.00

ex. VAT, ex. delivery costs

With the Digital Multimeter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The digital multimeter captures these currents and displays them on the display.

Measurable electrical parameters: AC V, AC A, resistance
Clamp diameter: 30 mm
Operating temperature: -10 … 50°C / 50 … 122°F
Current consumption: 10-mA
Incl. ISO calibration certificate

Electrical Tester PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 414.00

ex. VAT, ex. delivery costs

With the Electrical Tester, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Electrical Tester captures these currents and displays them on the display.

Measurable electrical parameters: AC V, AC A, resistance
Clamp diameter: 30 mm
Operating temperature: -10 … 50°C / 50 … 122°F
Current consumption: 10-mA
Incl. ISO calibration certificate

HVAC Meter PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 414.00

ex. VAT, ex. delivery costs

With the HVAC Meter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The HVAC Meter captures these currents and displays them on the display.

Measurable electrical parameters: AC V, AC A, resistance
Clamp diameter: 30 mm
Operating temperature: -10 … 50°C / 50 … 122°F
Current consumption: 10-mA
Incl. ISO calibration certificate

Multimeter / TRMS Multimeter PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 414.00

ex. VAT, ex. delivery costs

With the Multimeter / TRMS Multimeter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Multimeter / TRMS Multimeter captures these currents and displays them on the display.

Measurable electrical parameters: AC V, AC A, resistance
Clamp diameter: 30 mm
Operating temperature: -10 … 50°C / 50 … 122°F
Current consumption: 10-mA
Incl. ISO calibration certificate

Voltmeter PCE-LCT 1-ICA incl. ISO Calibration Certificate

US$ 414.00

ex. VAT, ex. delivery costs

With the Voltmeter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The Voltmeter captures these currents and displays them on the display.

Measurable electrical parameters: AC V, AC A, resistance
Clamp diameter: 30 mm
Operating temperature: -10 … 50°C / 50 … 122°F
Current consumption: 10-mA
Incl. ISO calibration certificate

Dissolved Oxygen Meter PCE-DOM 20

US$ 413.00

ex. VAT, ex. delivery costs

The Dissolved Oxygen Meter is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation.

Measuring range up to 20 mg / L
For oxygen analysis
Temperature compensation up to 50°C / 122°F
For measurement in liquids and in air
Exchangeable oxygen sensor

Environmental Meter PCE-DOM 20

US$ 413.00

ex. VAT, ex. delivery costs

The environmental meter PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this environmental meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the environmental meter is able to carry out an automatic temperature compensation.

Measuring range up to 20 mg / L
For oxygen analysis
Temperature compensation up to 50°C / 122°F
For measurement in liquids and in air
Exchangeable oxygen sensor

Environmental Meter PCE-PDR 10

US$ 413.00

ex. VAT, ex. delivery costs

The PCE-PDR 10 environmental meter is a pressure measurement gauge. Up to three pressure sensors can be connected to this environmental meter and synchronously read out and logged. Thanks to the 4 … 20-mA input signal, many different pressure sensors can be connected.

4 … 20-mA measuring signal
Intelligent storage system
Connection to a PC via RS232
Wall mounting for permanent installation
SD card slot for up to 16GB
Measurement of three pressure sensors simultaneously
Sensors must be selected as an option!

Environmental Tester PCE-DOM 20

US$ 413.00

ex. VAT, ex. delivery costs

The environmental tester PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this environmental tester, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the environmental tester is able to carry out an automatic temperature compensation.

Measuring range up to 20 mg / L
For oxygen analysis
Temperature compensation up to 50°C / 122°F
For measurement in liquids and in air
Exchangeable oxygen sensor

Environmental Tester PCE-PDR 10

US$ 413.00

ex. VAT, ex. delivery costs

The PCE-PDR 10 environmental tester is a pressure measurement gauge. Up to three pressure sensors can be connected to this environmental tester and synchronously read out and logged. Thanks to the 4 … 20-mA input signal, many different pressure sensors can be connected.

4 … 20-mA measuring signal
Intelligent storage system
Connection to a PC via RS232
Wall mounting for permanent installation
SD card slot for up to 16GB
Measurement of three pressure sensors simultaneously
Sensors must be selected as an option!

Food / Hygiene Meter PCE-DOM 20

US$ 413.00

ex. VAT, ex. delivery costs

The food / hygiene meter PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this food / hygiene meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the food / hygiene meter is able to carry out an automatic temperature compensation.

Measuring range up to 20 mg / L
For oxygen analysis
Temperature compensation up to 50°C / 122°F
For measurement in liquids and in air
Exchangeable oxygen sensor

HVAC Meter PCE-PDR 10

US$ 413.00

ex. VAT, ex. delivery costs

The PCE-PDR 10 HVAC meter is a pressure measurement gauge. Up to three pressure sensors can be connected to this HVAC meter and synchronously read out and logged. Thanks to the 4 … 20-mA input signal, many different pressure sensors can be connected.

4 … 20-mA measuring signal
Intelligent storage system
Connection to a PC via RS232
Wall mounting for permanent installation
SD card slot for up to 16GB
Measurement of three pressure sensors simultaneously
Sensors must be selected as an option!

Hygiene Tester PCE-DOM 20

US$ 413.00

ex. VAT, ex. delivery costs

The Hygiene Tester PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this food / hygiene meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the Hygiene Tester is able to carry out an automatic temperature compensation.

Measuring range up to 20 mg / L
For oxygen analysis
Temperature compensation up to 50°C / 122°F
For measurement in liquids and in air
Exchangeable oxygen sensor

Manometer PCE-PDR 10

US$ 413.00

ex. VAT, ex. delivery costs

The PCE-PDR 10 Manometer is a pressure measurement gauge. Up to three pressure sensors can be connected to this manometer and synchronously read out and logged. Thanks to the 4 … 20-mA input signal, many different pressure sensors can be connected.

4 … 20-mA measuring signal
Intelligent storage system
Connection to a PC via RS232
Wall mounting for permanent installation
SD card slot for up to 16GB
Measurement of three pressure sensors simultaneously
Sensors must be selected as an option!

Oxygen Meter PCE-DOM 20

US$ 413.00

ex. VAT, ex. delivery costs

The oxygen meter PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this oxygen meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the oxygen meter is able to carry out an automatic temperature compensation.

Measuring range up to 20 mg / L
For oxygen analysis
Temperature compensation up to 50°C / 122°F
For measurement in liquids and in air
Exchangeable oxygen sensor

Pressure Data Logger PCE-PDR 10

US$ 413.00

ex. VAT, ex. delivery costs

The PCE-PDR 10 pressure data logger is a pressure measurement gauge. Up to three pressure sensors can be connected to this pressure data logger and synchronously read out and logged. Thanks to the 4 … 20-mA input signal, many different pressure sensors can be connected.

4 … 20-mA measuring signal
Intelligent storage system
Connection to a PC via RS232
Wall mounting for permanent installation
SD card slot for up to 16GB
Measurement of three pressure sensors simultaneously
Sensors must be selected as an option!

Pressure Gauge PCE-PDR 10

US$ 413.00

ex. VAT, ex. delivery costs

The PCE-PDR 10 pressure gauge is a pressure measurement gauge. Up to three pressure sensors can be connected to this pressure gauge and synchronously read out and logged. Thanks to the 4 … 20-mA input signal, many different pressure sensors can be connected.

4 … 20-mA measuring signal
Intelligent storage system
Connection to a PC via RS232
Wall mounting for permanent installation
SD card slot for up to 16GB
Measurement of three pressure sensors simultaneously
Sensors must be selected as an option!

Pressure Meter PCE-PDR 10

US$ 413.00

ex. VAT, ex. delivery costs

The PCE-PDR 10 pressure meter is a pressure measurement gauge. Up to three pressure sensors can be connected to this pressure meter and synchronously read out and logged. Thanks to the 4 … 20-mA input signal, many different pressure sensors can be connected.

4 … 20-mA measuring signal
Intelligent storage system
Connection to a PC via RS232
Wall mounting for permanent installation
SD card slot for up to 16GB
Measurement of three pressure sensors simultaneously
Sensors must be selected as an option!

Water Analysis Meter PCE-DOM 20

US$ 413.00

ex. VAT, ex. delivery costs

The water analysis meter PCE-DOM 20 is a measuring device to determine the oxygen content both in liquids and in the ambient air. With this water analysis meter, water analyzes can be carried out on the oxygen content in a very short time and with the integrated temperature sensor, the water analysis meter is able to carry out an automatic temperature compensation.

Measuring range up to 20 mg / L
For oxygen analysis
Temperature compensation up to 50°C / 122°F
For measurement in liquids and in air
Exchangeable oxygen sensor

Environmental Meter PCE-PH 28L-ICA incl. ISO Calibration Certificate

US$ 412.00

ex. VAT, ex. delivery costs

The environmental meter is equipped with a flat electrode membrane which is installed in a shaft. So with the environmental meter you can measure samples of viscous media in test tubes. This feature makes it possible to use very small volumes of liquids in beakers or test tubes. As a result, the environmental meter can be used not only in the field but also in the laboratory.

Calibration points: 1, 2 or 3
Measuring range: -1 … 15 pH
Temperature measuring range: 0.0 … 60°C / 32 … 140°F
Flat pH electrode with long shaft
Automatic temperature compensation
For small sample quantities
incl. ISO Calibration Certificate

Environmental Tester PCE-PH 28L-ICA incl. ISO Calibration Certificate

US$ 412.00

ex. VAT, ex. delivery costs

The environmental tester is equipped with a flat electrode membrane which is installed in a shaft. So with the environmental tester you can measure samples of viscous media in test tubes. This feature makes it possible to use very small volumes of liquids in beakers or test tubes. As a result, the environmental tester can be used not only in the field but also in the laboratory.

Calibration points: 1, 2 or 3
Measuring range: -1 … 15 pH
Temperature measuring range: 0.0 … 60°C / 32 … 140°F
Flat pH electrode with long shaft
Automatic temperature compensation
For small sample quantities
incl. ISO Calibration Certificate

pH Meter PCE-PH 28L-ICA incl. ISO Calibration Certificate

US$ 412.00

ex. VAT, ex. delivery costs

The pH meter PCE-PH 28L-ICA is equipped with a flat electrode membrane which is installed in a shaft. So with the pH meter you can measure samples of viscous media in test tubes. This feature makes it possible to use very small volumes of liquids in beakers or test tubes. As a result, the pH meter can be used not only in the field but also in the laboratory.

Calibration points: 1, 2 or 3
Measuring range: -1 … 15 pH
Temperature measuring range: 0.0 … 60°C / 32 … 140°F
Flat pH electrode with long shaft
Automatic temperature compensation
For small sample quantities
incl. ISO Calibration Certificate

Water Analysis Meter PCE-PH 28L-ICA incl. ISO Calibration Certificate

US$ 412.00

ex. VAT, ex. delivery costs

The water analysis meter is equipped with a flat electrode membrane which is installed in a shaft. So with the water analysis meter you can measure samples of viscous media in test tubes. This feature makes it possible to use very small volumes of liquids in beakers or test tubes. As a result, the water analysis meter can be used not only in the field but also in the laboratory.

Calibration points: 1, 2 or 3
Measuring range: -1 … 15 pH
Temperature measuring range: 0.0 … 60°C / 32 … 140°F
Flat pH electrode with long shaft
Automatic temperature compensation
For small sample quantities
incl. ISO Calibration Certificate

Absolute Moisture Meter for Soil PCE-SMM 1

US$ 409.00

ex. VAT, ex. delivery costs

PCE-SMM 1 is an absolute moisture meter for soil ideal for use in agriculture, crop science, horticulture, botany, landscaping, gardening and environmental testing applications. This portable handheld moisture meter or analyzer measures soil moisture or humidity quickly, easily and accurately.

Moisture measurement range: 0 … 50 %
Resolution: 0.1 %
Accuracy: ±5 % +5 digits
250 mm / 9.84" long probe

$Antifreeze Digital Refractometer PCE-DRA 1 Ethylene Glycol / Propylene Glycol$

Antifreeze Digital Refractometer PCE-DRA 1 Ethylene Glycol / Propylene Glycol

US$ 409.00

ex. VAT, ex. delivery costs

PCE-DRA 1 is an antifreeze digital antifreeze refractometer used to determine the percentage or content and freezing point of propylene glycol- and ethylene glycol-based solutions. This waterproof IP65-rated digital refractometer features automatic temperature compensation (ATC) from +10 … +40 °C / +50 … +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:

Ethylene glycol %, propylene glycol %, temperature °C
Measuring range: 0 … 60 % ethylene glycol
Resolution: 0.1 % / 0.1 °
Accuracy: ±0.5 % / ±0.5 °C
Automatic temperature compensation (ATC)
Easy calibration with distilled water

Car Measuring Device PCE-DRA 1 Ethylene Glycol / Propylene Glycol

US$ 409.00

ex. VAT, ex. delivery costs

PCE-DRA 1 is an antifreeze car measuring device used to determine the percentage or content and freezing point of propylene glycol- and ethylene glycol-based solutions. This waterproof IP65-rated car measuring device features automatic temperature compensation (ATC) from +10 … +40 °C / +50 … +104 °F, as well as a large, easy-to-read LCD that shows both the measured value and the temperature.

Measurement parameters:

Ethylene glycol %, propylene glycol %, temperature °C
Measuring range: 0 … 60 % ethylene glycol
Resolution: 0.1 % / 0.1 °
Accuracy: ±0.5 % / ±0.5 °C
Automatic temperature compensation (ATC)
Easy calibration with distilled water

Damp Meter for Soil PCE-SMM 1

US$ 409.00

ex. VAT, ex. delivery costs

PCE-SMM 1 is a damp meter for soil ideal for use in agriculture, crop science, horticulture, botany, landscaping, gardening and environmental testing applications. This portable handheld moisture meter or analyzer measures soil moisture or humidity quickly, easily and accurately.

Moisture measurement range: 0 … 50 %
Resolution: 0.1 %
Accuracy: ±5 % +5 digits
250 mm / 9.84" long probe