The NDT test instrument PCE-VE 1036HR-F is a versatile inspection instrument or industrial camera. Various videoscope or endoscope cables with different characteristics can be connected to the NDT test instrument. A special advantage of the NDT test instrument is the large display, which offers the user the best possible overview of the area to be viewed due to its dimensions and resolution. The NDT test instrument camera allows the recording of pictures and videos, whereby the videos are additionally stored with an audio recording.

• 3 m / 9.8 ft endoscope cable with 2-way camera cable
• Stores images and video
• 8 GB Memory Card incl.

The NDT test Instrument PCE-VE 1030N is a versatile videoscope or video borescope inspection camera with a large 7" high-resolution display. This NDT test Instrument captures and stores both picture and video. Video recordings are accompanied by audio for a more immersive inspection experience.

• Cable length: 30 m / 98 ft
• Camera head diameter: 28 mm / 1.1 in
• SD card memory included
• Waterproof cable and camera

The two-way optics is a great advantage of the PCE-VE 1014N-F NDT test instrument or inspection camera. There is easy control of the camera head with the NDT test instrument. The NDT test instrument allows you to capture images and videos, and the videos are also stored with an audio recording. 

• Cable length: 1.5 m / 4.9 ft
• Camera head: 2-way
• Diameter: 4.5 mm / 0.18 in
• Resolution: 640 x 480 Pixel
• Storage of pictures and videos
• 8 GB memory card incl.
• LED lighting

PCE-HT 225E is a roll hardness test hammer, also called a rolled paper rebound hammer or Swiss hammer, used for non-destructive measurements of surface hardness and compression strength. Suitable for use with rolled paper, concrete, rock and building materials, this rebound hammer features a direct digital display, voice functionality, USB port data interface and memory for storing up 200 measurement values.

• Test range: 10 … 60 MPa or 100 … 600 kg/cm² / 1450.38 … 8702.26 psi
• Impact energy: 2.207 J or N-m / 0.225 kgf.m / 1.6278 ft-lb or Type N
• Impact stroke: 75 ± 0.3 mm / 2.95 ± 0.012 in
• Radius of spherical tip: 25 ± 1 mm / 0.99 ± 0.04 in
• Data processing software included

The hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. 

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.6%
• Impactor: Type D
• USB and WiFi for data transmission
• Incl. ISO Calibration Certificate

The PCE-830 Data Logging Instrument is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Data Logging Instrument also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

• PCE-830 + PCE-6801 amp clamp (100 A)
• Electrical conductor pick-up: 30 mm diameter
• Range selection: manual (1 A, 10 A, 100 A)
• Clamp dimensions: 210 x 62 x 36 mm
• Incl. ISO calibration certificate

The PCE-830-3 Data Logging Instrument is used for measuring one to three phases of electrical quantities for alternating current (AC). This Data Logging Instrument also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.

• PCE-830 + PCE-3007 flexible amp clamp (3000A)
• Electrical conductor pick-up: 170 mm / 6.7 in diameter
• Minimum radial curve: 35 mm / 1.4 in
• Length of electrical conductor: 610 mm / 24 in
• Sampling rate: 2 sec.
• Memory size: 512 kB / max. 52,420 data (1 phase)
• Incl. ISO calibration certificate

The UCI hardness tester PCE-3000U can be used for quickly checking the hardness of components even after installation. The device offers a wide measurement range, easy handling, robust design and a temperature resistance up to 40 °C or 104 °F. In addition to the hardness scales in Rockwell, Brinell and Vickers, the UCI hardness tester can test the tensile strength of steels up to 1740 MPa or 70 HRC.

- Ultrasonic non-destructive hardness testing or UCI 
- Ideal for thin metals, complex shapes, hardened layers, or requiring very small indentation
- Fast measurement times with very high accuracy
- One 50 N UCI probe included