The mobile 3-phase power meter Easycount-3-16-A is an energy meter, installed in a splash-proof and impact-resistant housing, for three-phase current up to 400 V. The approx. 50 cm / 19.6" long cable ends of the mobile 3-phase power meter are equipped with a CEE plug and a CEE coupling.

• Display: 6+1 roller counter
• Resolution: 0.1 kWh
• Degree of protection meter: IP 54

The mobile electrical tester Easycount-3-16-A is an energy meter, installed in a splash-proof and impact-resistant housing, for three-phase current up to 400 V. The approx. 50 cm / 19.6" long cable ends of the mobile electrical tester are equipped with a CEE plug and a CEE coupling.

• Display: 6+1 roller counter
• Resolution: 0.1 kWh
• Degree of protection meter: IP 54

The mobile power analyzer Easycount-3-16-A is an energy meter, installed in a splash-proof and impact-resistant housing, for three-phase current up to 400 V. The approx. 50 cm / 19.6" long cable ends of the mobile power analyzer are equipped with a CEE plug and a CEE coupling.

• Display: 6+1 roller counter
• Resolution: 0.1 kWh
• Degree of protection meter: IP 54

The mobile power meter Easycount-3-16-A is an energy meter, installed in a splash-proof and impact-resistant housing, for three-phase current up to 400 V. The approx. 50 cm / 19.6" long cable ends of the mobile power meter are equipped with a CEE plug and a CEE coupling.

• Display: 6+1 roller counter
• Resolution: 0.1 kWh
• Degree of protection meter: IP 54

• Automatic range: 30 … 130 dB
• Manual ranges: 30 … 80/50 … 100/80 … 130 dB
• Resolution: 0.1 dB
• Accuracy: ±1.4 dB
• Data logger function for 32,000 values
• Including sound calibratorSound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.Class II Acoustic Sound Calibrator
• Sound pressure level 94, 104, 114 db
• For weighting filters A, B, C and D
• 1/2 inch microphone connection
• Class II

The data logger with USB interface is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The data logger with USB interface has a logger function which enables the storage of up to 32,700 measured values.

• Automatic range: 30 … 130 dB
• Manual ranges: 30 … 80/50 … 100/80 … 130 dB
• Resolution: 0.1 dB
• Accuracy: ±1.4 dB
• Data logger function for 32,000 values
• Including sound calibratorSound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.Class II Acoustic Sound Calibrator
• Sound pressure level 94, 104, 114 db
• For weighting filters A, B, C and D
• 1/2 inch microphone connection
• Class II

The data logging sound level meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The sound level meter has a logger function which enables the storage of up to 32,700 measured values.

• Automatic range: 30 … 130 dB
• Manual ranges: 30 … 80/50 … 100/80 … 130 dB
• Resolution: 0.1 dB
• Accuracy: ±1.4 dB
• Data logger function for 32,000 values
• Including sound calibratorSound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.Class II Acoustic Sound Calibrator
• Sound pressure level 94, 104, 114 db
• For weighting filters A, B, C and D
• 1/2 inch microphone connection
• Class II

The decibel meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The decibel meter has a logger function, which enables the storage of up to 32,700 measured values.

• Automatic range: 30 … 130 dB
• Manual ranges: 30 … 80/50 … 100/80 … 130 dB
• Resolution: 0.1 dB
• Accuracy: ±1.4 dB
• Data logger function for 32,000 values
• Including sound calibratorSound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.Class II Acoustic Sound Calibrator
• Sound pressure level 94, 104, 114 db
• For weighting filters A, B, C and D
• 1/2 inch microphone connection
• Class II

PCE-910 is a portable handheld digital differential pressure gauge, meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
• Resolution: 100 Pa / 0.0145 psi / 0.001 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory

PCE-910 is a portable handheld digital differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
• Resolution: 100 Pa / 0.0145 psi / 0.001 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory

PCE-910 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
• Resolution: 100 Pa / 0.0145 psi / 0.001 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory

The digital thermometer is suitable for private and industrial use because of its price-performance ratio. A digital infrared thermometer is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

• Optical resolution 30:1
• Measuring range of -50 … 1000 °C / -58 … 1832 °F
• Maximum value display
• Adjustable emissivity
• incl. ISO Calibration Certificate

The environmental meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The environmental meter has a logger function, which enables the storage of up to 32,700 measured values.

• Automatic range: 30 … 130 dB
• Manual ranges: 30 … 80/50 … 100/80 … 130 dB
• Resolution: 0.1 dB
• Accuracy: ±1.4 dB
• Data logger function for 32,000 values
• Including sound calibratorSound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.Class II Acoustic Sound Calibrator
• Sound pressure level 94, 104, 114 db
• For weighting filters A, B, C and D
• 1/2 inch microphone connection
• Class II

The environmental tester is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The environmental tester has a logger function, which enables the storage of up to 32,700 measured values.

• Automatic range: 30 … 130 dB
• Manual ranges: 30 … 80/50 … 100/80 … 130 dB
• Resolution: 0.1 dB
• Accuracy: ±1.4 dB
• Data logger function for 32,000 values
• Including sound calibratorSound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.Class II Acoustic Sound Calibrator
• Sound pressure level 94, 104, 114 db
• For weighting filters A, B, C and D
• 1/2 inch microphone connection
• Class II

• Standard pH electrode
• Measuring range: 0 ... 14 pH
• Diameter: 9 mm
• Temperature range: 0 ... 130 °C
• Shaft / sensor material: Glass
• Connection: BNC
• Application: Waste water, sludge

The HVAC meter is suitable for private and industrial use because of its price-performance ratio. An infrared HVAC meter is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

• Optical resolution 30:1
• Measuring range of -50 … 1000 °C / -58 … 1832 °F
• Maximum value display
• Adjustable emissivity
• incl. ISO Calibration Certificate

PCE-910 is a portable handheld digital HVAC meter or differential pressure manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
• Resolution: 100 Pa / 0.0145 psi / 0.001 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory

The infrared thermometer is suitable for private and industrial use because of its price-performance ratio. An infrared thermometer is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

• Optical resolution 30:1
• Measuring range of -50 … 1000 °C / -58 … 1832 °F
• Maximum value display
• Adjustable emissivity
• incl. ISO Calibration Certificate

The noise meter / sound meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The noise meter / sound meter has a logger function, which enables the storage of up to 32,700 measured values.

• Automatic range: 30 … 130 dB
• Manual ranges: 30 … 80/50 … 100/80 … 130 dB
• Resolution: 0.1 dB
• Accuracy: ±1.4 dB
• Data logger function for 32,000 values
• Including sound calibratorSound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.Class II Acoustic Sound Calibrator
• Sound pressure level 94, 104, 114 db
• For weighting filters A, B, C and D
• 1/2 inch microphone connection
• Class II

PCE-910 is a portable handheld digital differential pressure meter or manometer used to measure differential pressure in pneumatic, compressor and pump installations, valves, tanks and heating, ventilation and air conditioning (HVAC) systems. The PCE-910 features a dust-proof, splash-resistant housing, allowing the meter to be used under adverse conditions.

• Pressure measuring range: ± 200 kPa / ± 29 psi / ± 2 bar
• Resolution: 100 Pa / 0.0145 psi / 0.001 bar
• 10 measurement units: psi, mbar, inH2O, mH2O, inHg, mmHg, Torr, Pa / kPa, atm, kg/cm²
• Optional PC software with RS-232 cable sold separately as a data transfer accessory

The pyrometer is suitable for private and industrial use because of its price-performance ratio. An infrared pyrometer is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

• Optical resolution 30:1
• Measuring range of -50 … 1000 °C / -58 … 1832 °F
• Maximum value display
• Adjustable emissivity
• incl. ISO Calibration Certificate

The sound level data logger is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The sound level data logger has a logger function which enables the storage of up to 32,700 measured values.

• Automatic range: 30 … 130 dB
• Manual ranges: 30 … 80/50 … 100/80 … 130 dB
• Resolution: 0.1 dB
• Accuracy: ±1.4 dB
• Data logger function for 32,000 values
• Including sound calibratorSound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.Class II Acoustic Sound Calibrator
• Sound pressure level 94, 104, 114 db
• For weighting filters A, B, C and D
• 1/2 inch microphone connection
• Class II

The SPL meter is particularly suitable for measurements of noise pollution in the field of industrial, health, safety and environmental monitoring. The SPL meter has a logger function, which enables the storage of up to 32,700 measured values.

• Automatic range: 30 … 130 dB
• Manual ranges: 30 … 80/50 … 100/80 … 130 dB
• Resolution: 0.1 dB
• Accuracy: ±1.4 dB
• Data logger function for 32,000 values
• Including sound calibratorSound calibrator for recalibrating sound measuring devices. Sound measuring devices are delivered pre-adjusted, the sensor of the device is subject to a temporal drift, with the sound calibrator you can always re-calibrate the sound measuring device independently and thus have continuously optimal measurement results. The sound calibrator is an optimal addition to the sound meter.Class II Acoustic Sound Calibrator
• Sound pressure level 94, 104, 114 db
• For weighting filters A, B, C and D
• 1/2 inch microphone connection
• Class II

The Surface Testing is suitable for private and industrial use because of its price-performance ratio. A digital infrared thermometer is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

• Optical resolution 30:1
• Measuring range of -50 … 1000 °C / -58 … 1832 °F
• Maximum value display
• Adjustable emissivity
• incl. ISO Calibration Certificate

The temperature meter is suitable for private and industrial use because of its price-performance ratio. An infrared temperature meter is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

• Optical resolution 30:1
• Measuring range of -50 … 1000 °C / -58 … 1832 °F
• Maximum value display
• Adjustable emissivity
• incl. ISO Calibration Certificate

The infrared thermometer is suitable for private and industrial use because of its price-performance ratio. An infrared thermometer is a contactless measuring device. The bright laser dots from infrared instruments are clearly visible and provide easier temperature measurement from a distance.

• Optical resolution 30:1
• Measuring range of -50 … 1000 °C / -58 … 1832 °F
• Maximum value display
• Adjustable emissivity
• incl. ISO Calibration Certificate

• measurement range: 20 ... 130 dB
• accuracy: ±1.5 dB
• time weighting: F and S
• frequency weighting: A, C and Z
• battery and mains operation
• standards: IEC 61672-1 (class II)

• measurement range: 20 ... 130 dB
• accuracy: ±1.5 dB
• time weighting: F and S
• frequency weighting: A, C and Z
• battery and mains operation
• standards: IEC 61672-1 (class II)

• measurement range: 20 ... 130 dB
• accuracy: ±1.5 dB
• time weighting: F and S
• frequency weighting: A, C and Z
• battery and mains operation
• standards: IEC 61672-1 (class II)

• measurement range: 20 ... 130 dB
• accuracy: ±1.5 dB
• time weighting: F and S
• frequency weighting: A, C and Z
• battery and mains operation
• standards: IEC 61672-1 (class II)

• measurement range: 20 ... 130 dB
• accuracy: ±1.5 dB
• time weighting: F and S
• frequency weighting: A, C and Z
• battery and mains operation
• standards: IEC 61672-1 (class II)

• measurement range: 20 ... 130 dB
• accuracy: ±1.5 dB
• time weighting: F and S
• frequency weighting: A, C and Z
• battery and mains operation
• standards: IEC 61672-1 (class II)