The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

• Measuring range: 10 … 999.9 V
• AC voltage AC
• Alternating current AC
• Active power
• Power factor
• Phase angle
• Frequency
• Harmonic measurement
• Data memory: 512 kB   (non-volatile memory)
• incl. 4 current clamps / tapping terminals
• Standards: IP 30 / IEC 61 010, 600 V / CAT III
• incl. ISO Calibration Certificate
• incl. ISO Calibration Certificate

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

• Measuring range: 10 … 999.9 V
• AC voltage AC
• Alternating current AC
• Active power
• Power factor
• Phase angle
• Frequency
• Harmonic measurement
• Data memory: 512 kB   (non-volatile memory)
• incl. 4 current clamps / tapping terminals
• Standards: IP 30 / IEC 61 010, 600 V / CAT III
• incl. ISO Calibration Certificate
• incl. ISO Calibration Certificate

The microohm meter PCE-MO 3001 is made to measure smallest electrical resistances. It uses four test cables that can be connected to the microohm meter. The microohm meter uses two test cables and a constant current source to allow stable current to flow within the measured device. 

• Four-wire method
• Six selectable measuring ranges
• Large LCD display
• Max. current is 1 A
• Safety: EN 61010-1 
  
• incl. ISO-Calibration certificate

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

• Measuring range: 10 … 999.9 V
• AC voltage AC
• Alternating current AC
• Active power
• Power factor
• Phase angle
• Frequency
• Harmonic measurement
• Data memory: 512 kB   (non-volatile memory)
• incl. 4 current clamps / tapping terminals
• Standards: IP 30 / IEC 61 010, 600 V / CAT III
• incl. ISO Calibration Certificate
• incl. ISO Calibration Certificate

PCE-PA 8000 is a portable handheld Clamp Meter used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

• True RMS measurement for ACA, ACV
• True power: W, KW, MW
• VA, KVA, MVA, VAR, KVAR, MVAR
• PF (power factor), phase angle (Φ)
• KWH, KVAH, KVARH, PFH
• Voltage measurement range: 10 … 600 ACV
• Current measurement range: 0.2 … 1200 ACA
• Real-time current, voltage and power consumption measurement
• Built-in data recorder with adjustable sample rate: 2 … 7,200 sec.
• Incl. ISO Calibration Certificate

PCE-PA 8000 is a portable handheld Power Meter used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

• True RMS measurement for ACA, ACV
• True power: W, KW, MW
• VA, KVA, MVA, VAR, KVAR, MVAR
• PF (power factor), phase angle (Φ)
• KWH, KVAH, KVARH, PFH
• Voltage measurement range: 10 … 600 ACV
• Current measurement range: 0.2 … 1200 ACA
• Real-time current, voltage and power consumption measurement
• Built-in data recorder with adjustable sample rate: 2 … 7,200 sec.
• Incl. ISO Calibration Certificate

The HVAC meter is a portable handheld Clamp Meter used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy HVAC meter not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

• True RMS measurement for ACA, ACV
• True power: W, KW, MW
• VA, KVA, MVA, VAR, KVAR, MVAR
• PF (power factor), phase angle (Φ)
• KWH, KVAH, KVARH, PFH
• Voltage measurement range: 10 … 600 ACV
• Current measurement range: 0.2 … 1200 ACA
• Real-time current, voltage and power consumption measurement
• Built-in data recorder with adjustable sample rate: 2 … 7,200 sec.
• Incl. ISO Calibration Certificate

The HVAC meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the HVAC meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

• Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
• Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
• Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
• Automatic ISO 10816-3 evaluation
• Data logger: 50 memory locations with 43200 measured values each
• FFT analysis
• Route measurement
• Measuring tip with handgrip
• Rechargeable battery
• Color graphic display
• incl. ISO Calibration Certificate

• CIE L*a*b*C*h, L*a*b* and XYZ
• Automatic white and black calibration
• 8°/d geometry diffused illumination integrating sphere system
• Rechargable Li-ion battery
• incl. ISO-Calibration Certificate

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

• Measuring range: 10 … 999.9 V
• AC voltage AC
• Alternating current AC
• Active power
• Power factor
• Phase angle
• Frequency
• Harmonic measurement
• Data memory: 512 kB   (non-volatile memory)
• incl. 4 current clamps / tapping terminals
• Standards: IP 30 / IEC 61 010, 600 V / CAT III
• incl. ISO Calibration Certificate
• incl. ISO Calibration Certificate

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

• Measuring range: 10 … 999.9 V
• AC voltage AC
• Alternating current AC
• Active power
• Power factor
• Phase angle
• Frequency
• Harmonic measurement
• Data memory: 512 kB   (non-volatile memory)
• incl. 4 current clamps / tapping terminals
• Standards: IP 30 / IEC 61 010, 600 V / CAT III
• incl. ISO Calibration Certificate
• incl. ISO Calibration Certificate

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

• Measuring range: 10 … 999.9 V
• AC voltage AC
• Alternating current AC
• Active power
• Power factor
• Phase angle
• Frequency
• Harmonic measurement
• Data memory: 512 kB   (non-volatile memory)
• incl. 4 current clamps / tapping terminals
• Standards: IP 30 / IEC 61 010, 600 V / CAT III
• incl. ISO Calibration Certificate
• incl. ISO Calibration Certificate

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

• Measuring range: 10 … 999.9 V
• AC voltage AC
• Alternating current AC
• Active power
• Power factor
• Phase angle
• Frequency
• Harmonic measurement
• Data memory: 512 kB   (non-volatile memory)
• incl. 4 current clamps / tapping terminals
• Standards: IP 30 / IEC 61 010, 600 V / CAT III
• incl. ISO Calibration Certificate

The microohm meter PCE-MO 3001 is made to measure smallest electrical resistances. It uses four test cables that can be connected to the microohm meter. The microohm meter uses two test cables and a constant current source to allow stable current to flow within the measured device. 

• Four-wire method
• Six selectable measuring ranges
• Large LCD display
• Max. current is 1 A
• Safety: EN 61010-1 
• incl. ISO-Calibration certificate

The PCE-360 is a HVAC Meter with data logger functionality. This versatile Portable Power Analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

• Measuring range: 10 … 999.9 V
• AC voltage AC
• Alternating current AC
• Active power
• Power factor
• Phase angle
• Frequency
• Harmonic measurement
• Data memory: 512 kB   (non-volatile memory)
• incl. 4 current clamps / tapping terminals
• Standards: IP 30 / IEC 61 010, 600 V / CAT III
• incl. ISO Calibration Certificate
• incl. ISO Calibration Certificate

• alternating voltage: 40 ... 400 V
• alternating current: 2 ... 1250 A
• resolution: 0.01 V / 0.01 A
• active, apparent and reactive power
• electrical energy in Wh
• incl. app for Android
• 8 MB internal memory
• magnetic measuring adaptor
• incl. ISO-Calibration Certificate

• alternating voltage: 40 ... 400 V
• alternating current: 2 ... 1250 A
• resolution: 0.01 V / 0.01 A
• active, apparent and reactive power
• electrical energy in Wh
• incl. app for Android
• 8 MB internal memory
• magnetic measuring adaptor
• incl. ISO-Calibration Certificate

• alternating voltage: 40 ... 400 V
• alternating current: 3 ... 4800 A
• resolution: 0.01 V / 0.01 A
• active, apparent and reactive power
• electrical energy in Wh
• incl. app for Android
• 8 MB internal memory
• magnetic measuring adaptor
• incl. ISO-Calibration Certificate

• alternating voltage: 40 ... 400 V
• alternating current: 3 ... 4800 A
• resolution: 0.01 V / 0.01 A
• active, apparent and reactive power
• electrical energy in Wh
• incl. app for Android
• 8 MB internal memory
• magnetic measuring adaptor
• incl. ISO-Calibration Certificate

• CIE L*a*b*C*h, L*a*b* and XYZ
• Automatic white and black calibration
• 8°/d geometry diffused illumination integrating sphere system
• Rechargable Li-ion battery
• incl. ISO-Calibration Certificate

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

• Measuring range: 10 … 999.9 V
• AC voltage AC
• Alternating current AC
• Active power
• Power factor
• Phase angle
• Frequency
• Harmonic measurement
• Data memory: 512 kB   (non-volatile memory)
• incl. 4 current clamps / tapping terminals
• Standards: IP 30 / IEC 61 010, 600 V / CAT III
• incl. ISO Calibration Certificate
• incl. ISO Calibration Certificate

• CIE L*a*b*C*h, L*a*b* and XYZ
• Automatic white and black calibration
• 8°/d geometry diffused illumination integrating sphere system
• Rechargable Li-ion battery
• incl. ISO-Calibration Certificate

The PCE-360 is a HVAC Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

• Measuring range: 10 … 999.9 V
• AC voltage AC
• Alternating current AC
• Active power
• Power factor
• Phase angle
• Frequency
• Harmonic measurement
• Data memory: 512 kB   (non-volatile memory)
• incl. 4 current clamps / tapping terminals
• Standards: IP 30 / IEC 61 010, 600 V / CAT III
• incl. ISO Calibration Certificate
• incl. ISO Calibration Certificate

The ohm meter PCE-MO 3001 is made to measure smallest electrical resistances. It uses four test cables that can be connected to the ohm meter. The ohm meter uses two test cables and a constant current source to allow stable current to flow within the measured device. 

• Four-wire method
• Six selectable measuring ranges
• Large LCD display
• Max. Current is 1 A
• Safety: EN 61010-1
• incl. ISO-Calibration certificate

The force gage is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gage. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 10,000 kg / 100 kN / 22,046 lb
• Resolution: 5 kg / 50 N / 11 lb
• Minimum load: 100 kg / 220 lb
• Supplied without remote control indicator
• incl. ISO Calibration Certificate

The force gauge is ideal for mobile tensile measurements, such as those carried out by surveyors. Quality materials are used in the manufacture of the force gauge. Despite the high measuring capacity, these materials enable a compact design with a low weight.

• Measurement range: 10,000 kg / 100 kN / 22,046 lb
• Resolution: 5 kg / 50 N / 11 lb
• Minimum load: 100 kg / 220 lb
• Supplied without remote control indicator
• incl. ISO Calibration Certificate