Zum Hauptinhalt springen
  1. You are here:
  2. Home
  3. Products for 'pce spu'
Profilometer PCE-RT 2000
Profilometer PCE-RT 2000
US$ 2,534.00
ex. VAT, ex. delivery costs
The profilometer PCE-RT 2000 is used for accurate measurement of surface roughness. The profilometer PCE-RT 2000 can be used on all surfaces. The roughness with the profilometer is precisely recorded via the piezo probe. The profilometer PCE-RT 2000 can be purchased here in our online shop.

  • Measures Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv, Rc in both Metric (µm) and Imperial (µinch)
  • Ra, Rq, Rc : 0.005 μm…16 μm / 0.197 µinch … 629.921 µinch measurement range
  • Rz, Rt Rp, Rv: 0.020 µm … 200 µm / 0.797 µinch … 7874.016 µinch measurement range
  • Rsm: 5 μm …1000 μm / 1968 µinch … 3937 µinch measurement range
  • Rsk: -1 …. 1 measurement range
  • Measurement accuracy: <± 10% and Repeatability < 6%
  • Robust Piezoelectric sensor
  • Saves up to 20 Data points
  • 3 different cutoff wavelengths
  • Micro USB Interface
  • PC Software
  • Built-in rechargeable li-ion battery
Details
Accelerometer PCE-VM 20
Accelerometer PCE-VM 20
US$ 2,504.00
ex. VAT, ex. delivery costs
The accelerometer PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The accelerometer can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

  • Vibration acceleration: 0 … 200 m/s², RMS and peak-peak
  • Vibration speed: 0 … 200 mm/s, RMS
  • Vibration distance: 0 … 2000 μm, peak-peak
  • Real-time FFT analysis
  • Direct evaluation according to DIN ISO 10816
Details
Durometer PCE-2900
Durometer PCE-2900
US$ 2,327.00
ex. VAT, ex. delivery costs

The durometer PCE-2900 has been developed for hardness measurements on metallic materials. The durometer PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The durometer PCE-2900 measures the hardness according to the Leeb rebound principle. 

  • Measurement according to Leeb Rebound method
  • Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
  • Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
  • Accuracy: ± 0.5%, Repeatability: ± 0.6%
  • Impactor: Type D
  • USB and WiFi for data transmission

Details
Hardness Tester PCE-2900
Hardness Tester PCE-2900
US$ 2,327.00
ex. VAT, ex. delivery costs

The hardness tester PCE-2900 has been developed for hardness measurements on metallic materials. The hardness tester PCE-2900 measures the material hardness in Vickers, Brinell, Rockwell, Leeb and Shore. The hardness tester PCE-2900 measures the hardness according to the Leeb rebound principle. 

  • Measurement according to Leeb Rebound method
  • Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
  • Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
  • Accuracy: ± 0.5%, Repeatability: ± 0.6%
  • Impactor: Type D
  • USB and WiFi for data transmission

Details
Spectrophotometer PCE-CSM 4
Spectrophotometer PCE-CSM 4
US$ 2,451.00
ex. VAT, ex. delivery costs

This Spectrophotometer is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The Spectrophotometer simulates to see surfaces like with human eyes. Used mainly in the medical and food industry the color test instrument in addition meets all requirements for plastics surface measurements (PP, PE, PET, ABS, EVA) and also powders. The color meter is delivered manufacturer calibrated, but can optionally be certified to ISO standards.


  • Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
  • Rechargeable lithium-ion battery
  • Auto white black calibration
  • Designed specifically for the food industry
  • Software included

Details
Colorimeter PCE-CSM 4
Colorimeter PCE-CSM 4
US$ 2,451.00
ex. VAT, ex. delivery costs

This Colorimeter is especially designed for meat, food, vegetables or wet products testing. Only the aperture comes into contact with the surfaces to be measured. So it is guaranteed that no liquids can cause cross contamination while doing the measurement. The colorimeter simulates to see surfaces like with human eyes. Used mainly in the medical and food industry the color test instrument in addition meets all requirements for plastics surface measurements (PP, PE, PET, ABS, EVA) and also powders. The color meter is delivered manufacturer calibrated, but can optionally be certified to ISO standards.


  • Measuring aperture of 20 mm and 45°/0° illumination/viewing angle
  • Rechargeable lithium-ion battery
  • Auto white black calibration
  • Designed specifically for the food industry
  • Software included

Details
Electrical Tester PCE-IT 150
Electrical Tester PCE-IT 150
US$ 2,450.00
ex. VAT, ex. delivery costs
The electrical tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 … 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the electrical tester.

  • Insulation resistance: 0 … 30 TΩ
  • Accuracy: ± (5% of Mw.+5 digits)
  • Test voltage: 500 V … 15 kV
  • Direct alternating voltage: 30 … 600 V
  • Accuracy: ± (2.0% v.Mw. +3 digits)
  • Polarisation index PI
  • Dielectric absorption ratio DAR
  • Memory and software
Details
Insulation Tester PCE-IT 150
Insulation Tester PCE-IT 150
US$ 2,450.00
ex. VAT, ex. delivery costs
The insulation tester is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 … 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the insulation tester.

  • Insulation resistance: 0 … 30 TΩ
  • Accuracy: ± (5% of Mw.+5 digits)
  • Test voltage: 500 V … 15 kV
  • Direct alternating voltage: 30 … 600 V
  • Accuracy: ± (2.0% v.Mw. +3 digits)
  • Polarisation index PI
  • Dielectric absorption ratio DAR
  • Memory and software
Details
Isolation Meter PCE-IT 150
Isolation Meter PCE-IT 150
US$ 2,450.00
ex. VAT, ex. delivery costs
The isolation meter is for insulation measurements with a test voltage of up to 15 kV. The measuring range of 0 … 30 TΩ and other measuring functions make the tester versatile. With 4 quick selection buttons for common test voltages and the option of setting the voltage in 500 V steps. Pre-configured diagnostic tests, including (PI), dielectric absorption ratio (DAR) and a memory function for 200 measurements are integrated into the isolation meter.

  • Insulation resistance: 0 … 30 TΩ
  • Accuracy: ± (5% of Mw.+5 digits)
  • Test voltage: 500 V … 15 kV
  • Direct alternating voltage: 30 … 600 V
  • Accuracy: ± (2.0% v.Mw. +3 digits)
  • Polarisation index PI
  • Dielectric absorption ratio DAR
  • Memory and software
Details