Products for 'Material Tester PCE CT 21BT ICA incl. ISO Calibration Certificate '

Automotive Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,303.00

ex. VAT, ex. delivery costs

The coating thickness automotive tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the automotive tester are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Material Thickness Meter PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,303.00

ex. VAT, ex. delivery costs

The material thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the material thickness meter are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Material Tester PCE-RT 11-ICA Incl. ISO Calibration Certificate

US$ 2,146.00

ex. VAT, ex. delivery costs

The Material Tester PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device.

Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
Robust Piezoelectric sensor
Accuracy: ± 15% and Repeatability < 12%
Built-in rechargeable li-ion battery
Inc. ISO Calibration Certificate

NDT Tester - Surface Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,303.00

ex. VAT, ex. delivery costs

The coating thickness NDT Tester - surface tester works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the NDT tester are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Paint Thickness Tester PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,303.00

ex. VAT, ex. delivery costs

The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Thickness Meter PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,303.00

ex. VAT, ex. delivery costs

The coating thickness meter works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness meter are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Paint Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,303.00

ex. VAT, ex. delivery costs

The paint thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the paint thickness gauge are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

IoT Sensor PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,303.00

ex. VAT, ex. delivery costs

The IoT sensor works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the IoT sensor are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,303.00

ex. VAT, ex. delivery costs

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Material Surface Roughness Tester PCE-RT 1200-ICA Incl. ISO Calibration Cert.

US$ 2,410.00

ex. VAT, ex. delivery costs

The Material Surface Roughness Tester PCE-RT 1200-ICA is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The material surface roughness tester PCE-RT 1200-ICA is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
Induction method with Diamond sensor
Accuracy < ± 10% and Repeatability < 6%
Saves up to 20 Data points
Micro-USB interface
Built-in rechargeable li-ion battery
Incl. ISO calibration certificate

NDT Test Instruments PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,303.00

ex. VAT, ex. delivery costs

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Material Hardness Tester for Metal with ISO Certificate PCE-2600N-ICA

US$ 2,283.00

ex. VAT, ex. delivery costs

The Material Hardness Tester for Metal PCE-2600N-ICA is used wherever a fast hardness test has to be carried out. It is possible to use the material tester PCE-2600N-ICA to determine the surface hardness of many metals. The material tester PCE-2600N-ICA is especially suitable for quality or product inspection.

Measurement according to Leeb Rebound method
Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
Accuracy: ± 0.5%, Repeatability: ± 0.8%
Impactor: DL
Display: 128 x 64 OLED
Includes ISO calibration certificate

Car Measuring Device PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,303.00

ex. VAT, ex. delivery costs

The car measuring device works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the car measuring device are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Coating Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Certificate

US$ 2,303.00

ex. VAT, ex. delivery costs

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Material Tester PCE-CT 1000

US$ 2,442.00

ex. VAT, ex. delivery costs

The Material Tester works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Material Tester is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Roughness Tester PCE-RT 11-ICA Incl. ISO Calibration Certificate

US$ 2,146.00

ex. VAT, ex. delivery costs

The Roughness Tester PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device. The small roughness tester is especially designed for fast measuring of roughness.

Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
Robust Piezoelectric sensor
Accuracy: ± 15% and Repeatability < 12%
Built-in rechargeable li-ion battery
Inc. ISO Calibration Certificate

Surface Testing - Thickness Gauge PCE-CT 100N-ICA incl. ISO Calibration Cert.

US$ 2,303.00

ex. VAT, ex. delivery costs

The surface testing - coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via Wifi and USB
Two different probes for NFe and Fe (included)
incl. ISO Calibration Certificate

Electrical Tester PCE-MO 3001-ICA incl. ISO-Calibration certificate

US$ 2,403.00

ex. VAT, ex. delivery costs

The ohm meter PCE-MO 3001 is made to measure smallest electrical resistances. It uses four test cables that can be connected to the ohm meter. The ohm meter uses two test cables and a constant current source to allow stable current to flow within the measured device.

Four-wire method
Six selectable measuring ranges
Large LCD display
Max. Current is 1 A
Safety: EN 61010-1
incl. ISO-Calibration certificate

Electrical Tester PCE-MO 2010-ICA incl. ISO calibration certificate

US$ 2,363.00

ex. VAT, ex. delivery costs

The electrical tester with seven selectable measuring ranges from 0 µΩ to 200 Ω, a maximum resolution of 0.1 µΩ and a maximum test current of 10 A offers a wide range of applications. Thanks to the 4-wire measuring method, the electrical tester guarantees accurate measurements at the lowest resistances without the influence of the lead resistance.

Measuring range 0 µΩ … 200 Ω
Resolution: 0.1 µΩ
Accuracy: 1 %
Test current: 10 A, 1 A, 100 mA, 10 mA
Memory for 200 measured values
Software with data export
incl. ISO calibration certificate

Roughness Tester PCE-RT 1200-ICA Incl. ISO Calibration Cert.

US$ 2,410.00

ex. VAT, ex. delivery costs

The Roughness Tester PCE-RT 1200-ICA is used to determine surface roughness. The compact roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The roughness tester PCE-RT 1200-ICA is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
Induction method with Diamond sensor
Accuracy < ± 10% and Repeatability < 6%
Saves up to 20 Data points
Micro-USB interface
Built-in rechargeable li-ion battery
Incl. ISO calibration certificate

Paint Roughness Tester PCE-RT 11-ICA Incl. ISO Calibration Certificate

US$ 2,146.00

ex. VAT, ex. delivery costs

Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
Robust Piezoelectric sensor
Accuracy: ± 15% and Repeatability < 12%
Built-in rechargeable li-ion battery
Inc. ISO Calibration Certificate

Clamp on Tester PCE-PA 6500 F50-ICA incl. ISO-Calibration Certificate

US$ 2,437.00

ex. VAT, ex. delivery costs

The Clamp on Tester measures current and voltage values using the connected current transformers and test leads. From this, the active, apparent and reactive power are determined and transmitted to the measuring platform every second via Wi-Fi. The data is then filed historically on the Clamp on Tester, processed graphically and can be analysed or exported.

alternating voltage: 40 ... 400 V
alternating current: 2 ... 1250 A
resolution: 0.01 V / 0.01 A
active, apparent and reactive power
electrical energy in Wh
incl. app for Android
8 MB internal memory
magnetic measuring adaptor
incl. ISO-Calibration Certificate

Clamp on Tester PCE-PA 6500 F150-ICA incl. ISO-Calibration Certificate

US$ 2,437.00

ex. VAT, ex. delivery costs

alternating voltage: 40 ... 400 V
alternating current: 3 ... 4800 A
resolution: 0.01 V / 0.01 A
active, apparent and reactive power
electrical energy in Wh
incl. app for Android
8 MB internal memory
magnetic measuring adaptor
incl. ISO-Calibration Certificate

Tensile Tester PCE-DFG 100K X-ICA incl. ISO-Calibration Certificate

US$ 2,325.00

ex. VAT, ex. delivery costs

The Tensile Tester records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Tensile Tester is supplied with an external measuring cell and can measure forces of up to 100 kN.

Measuring range: 0 ... 100 kN
Resolution: 10 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 ... 7200 Hz
incl. ISO-Calibration Certificate

Tensile Tester PCE-DFG 10K X-ICA incl. ISO-Calibration Certificate

US$ 2,209.00

ex. VAT, ex. delivery costs

The Tensile Tester records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 10,000 N.

Measuring range: 0 ... 10 kN
Resolution: 2 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measurement rate: 1 .... 7,200 Hz
incl. ISO-Calibration Certificate

Electrical Tester 2-Channel PCE-PA 7500-ICA incl. ISO-Calibration Certificate

US$ 2,095.00

ex. VAT, ex. delivery costs

The electrical tester is used for the quick and precise measurement or analysis of parameters such as power consumption and quality. The electrical tester has 2 input channels for measuring parameters including voltage, current, active power, power factor, frequency, and energy consumption in kWh.

Power range: 0.1 … 5000 W
Current range: 0.001 … 20 A AC
Frequency, power factor, energy
Accuracy: ±(0.4% of reading + 0.1)
2 input channels

Color display
incl. ISO-Calibration Certificate

Profilometer PCE-RT 11-ICA Incl. ISO Calibration Certificate

US$ 2,146.00

ex. VAT, ex. delivery costs

The Profilometer PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device.

Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
Robust Piezoelectric sensor
Accuracy: ± 15% and Repeatability < 12%
Built-in rechargeable li-ion battery
Inc. ISO Calibration Certificate

Material Thickness Meter PCE-CT 100N

US$ 2,145.00

ex. VAT, ex. delivery costs

Measuring range: 0 … 1250 µm
Accuracy: ± (1% + 1 µm)
Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
Measurement data storage for up to 500 data
Data transfer via wifi and USB
Two different probes for NFe and Fe (included)

Material Thickness Meter PCE-CT 1000

US$ 2,442.00

ex. VAT, ex. delivery costs

The Material Thickness Meter works according to the pulse-reflection principle of ultrasonic measurement and delivers precise results for a wide range of materials. The Material Thickness Meter is for measuring coating thicknesses on non-metallic substrates such as plastic parts, wood or glass as well as for determining the thickness of metallic base materials and coatings.

Coating thickness: 13 ... 5500 µm
Material thickness: 300 ... 14800 µm
Resolution: 1 µm
Accuracy: 3% of the weight
Multilayer measurements
Waveform display
Adjustable sonic velocity
Continuous measurement possible
Internal memory for 999 data records
PC software

Surface Testing - Roughness Tester PCE-RT 11-ICA Incl. ISO Calibration Cert.

US$ 2,146.00

ex. VAT, ex. delivery costs

The Surface Tester PCE-RT 11-ICA is a portable measuring instrument for determination of surface roughness according to Ra, Rz, Rq and Rt in just one device. The small roughness tester is especially designed for fast measuring of roughness. The roughness is a term of surface physics that describes unevenness of surface height.

Measures Ra, Rz, Rq and Rt in both Metric (µm) and Imperial (µinch)
Ra, Rq: 0.05 µm … 10 µm / 0.002 µinch … 394 µinch measurement range
Rz, Rt: 0.1 µm … 50 µm / 0.004 µinch …1968 µinch measurement range
Robust Piezoelectric sensor
Accuracy: ± 15% and Repeatability < 12%
Built-in rechargeable li-ion battery
Inc. ISO Calibration Certificate

Metal Hardness Tester with ISO Certificate PCE-2600N-ICA

US$ 2,283.00

ex. VAT, ex. delivery costs

Measurement according to Leeb Rebound method
Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
Accuracy: ± 0.5%, Repeatability: ± 0.8%
Impactor: DL
Display: 128 x 64 OLED
Includes ISO calibration certificate

Portable Metal Hardness Tester with ISO Certificate PCE-2600N-ICA

US$ 2,283.00

ex. VAT, ex. delivery costs

The Portable Metal Hardness Tester PCE-2600N-ICA is used wherever a fast hardness test has to be carried out. It is possible to use the hardness tester PCE-2600N-ICA to determine the surface hardness of many metals. The hardness tester PCE-2600N-ICA is especially suitable for quality or product inspection.

Measurement according to Leeb Rebound method
Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS
Accuracy: ± 0.5%, Repeatability: ± 0.8%
Impactor: DL
Display: 128 x 64 OLED
Includes ISO calibration certificate

Gloss Meter PCE-PGM 100-ICA incl. ISO calibration certificate

US$ 2,133.00

ex. VAT, ex. delivery costs

The PCE-PGM 100 gloss meter works with measuring geometries of 20°, 60° and 85°, using the reflection principle. This means that the gloss meter emits light which hits the surface to be tested. A part of the light will be absorbed by the surface and another part will be reflected.

Measurement geometry: 20° / 60° / 85°
Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
Range: 20°: 0 … 1000 GU / 60°: 0 … 1000 GU / 85°: 0 … 160 GU
Incl. ISO calibration certificate

Paint Gloss Tester PCE-PGM 100-ICA incl. ISO calibration certificate

US$ 2,133.00

ex. VAT, ex. delivery costs

Measurement geometry: 20° / 60° / 85°
Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
Range: 20°: 0 … 1000 GU / 60°: 0 … 1000 GU / 85°: 0 … 160 GU
Incl. ISO calibration certificate

Paint Roughness Tester PCE-RT 1200-ICA Incl. ISO Calibration Cert.

US$ 2,410.00

ex. VAT, ex. delivery costs

Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
Induction method with Diamond sensor
Accuracy < ± 10% and Repeatability < 6%
Saves up to 20 Data points
Micro-USB interface
Built-in rechargeable li-ion battery
Incl. ISO calibration certificate

Profilometer - Roughness Tester PCE-RT 1200-ICA Incl. ISO Calibration Cert.

US$ 2,410.00

ex. VAT, ex. delivery costs

The profilometer - roughness tester PCE-RT 1200-ICA is used to determine surface roughness. The compact profilometer is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The profilometer is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
Ra, Rq: 0.005 … 16.00 μm / 0.197 µinch… 629.921 µinch measurement range
Rz, Rt: 0.002 … 200.0 μm / 0.079 µinch… 7874.016 µinch measurement range
Induction method with Diamond sensor
Large OLED display
Display for the position of the probe
Micro-USB interface
incl. ISO Calibration Certificate