Gas Leak Detector Gasmaster GM-4
US$ 2,478.00
ex. VAT, ex. delivery costs

The Gasmaster GM-4 gas leak detector is a reliable, stationary warning device for gases. To connect a gas sensor, the gas measuring device is optionally supplied with a 4 - 20 mA or an mV signal input. The signal input has two alarm relays with which the gas leak detector can control signal lamps/horns or fans, for example.

  • 4 inputs for a gas sensor
  • Adaptation of gas sensors: O2, O3, CO, CO2, NH3, H2S
  • Various combinations possible
  • Event logging
  • Large, backlit LCD display
  • A/V alarm device max. 24V DC 650 mA
  • Gas sensors optional

Food / Hygiene ATP Testing Meter PCE-ATP 1 KIT3 for surfaces and water
US$ 2,455.00
ex. VAT, ex. delivery costs
The PCE-ATP 1-KIT3 is used to quickly and easily check the cleanliness of surfaces and water. The  ATP Testing Meter displays a measurement result on the large LC display after only 10 seconds. Up to 10,000 measurement data sets with time and date can be stored on the internal memory of the ATP measuring device.

  • Measuring width: 0 … 999,999 RLU
  • Fast hygiene tests in just 10 seconds
  • USB and Bluetooth printer interface
  • Automatic calibration
  • For HACCP implementation
  • Data storage
  • Incl. 100 Test tubes (swabs) for surfaces
  • Incl. 100 Test tubes (swabs) for water
Hygiene Tester PCE-ATP 1 KIT3 for surfaces and water
US$ 2,455.00
ex. VAT, ex. delivery costs
The PCE-ATP 1-KIT3 is used to quickly and easily check the cleanliness of surfaces and water. The  ATP Testing Meter displays a measurement result on the large LC display after only 10 seconds. Up to 10,000 measurement data sets with time and date can be stored on the internal memory of the ATP measuring device.

  • Measuring width: 0 … 999,999 RLU
  • Fast hygiene tests in just 10 seconds
  • USB and Bluetooth printer interface
  • Automatic calibration
  • For HACCP implementation
  • Data storage
  • Incl. 100 Test tubes (swabs) for surfaces
  • Incl. 100 Test tubes (swabs) for water
Luminometer PCE-ATP 1 KIT3 for surfaces and water
US$ 2,455.00
ex. VAT, ex. delivery costs
The luminometer is used to quickly and easily check the cleanliness of surfaces and water. The  luminometer displays a measurement result on the large LC display after only 10 seconds. Up to 10,000 measurement data sets with time and date can be stored on the internal memory of the ATP measuring device.

  • Measuring width: 0 … 999,999 RLU
  • Fast hygiene tests in just 10 seconds
  • USB and Bluetooth printer interface
  • Automatic calibration
  • For HACCP implementation
  • Data storage
  • Incl. 100 Test tubes (swabs) for surfaces
  • Incl. 100 Test tubes (swabs) for water
Surface Testing - ATP Meter PCE-ATP 1 KIT3 for surfaces and water
US$ 2,455.00
ex. VAT, ex. delivery costs
The surface testing PCE-ATP 1-KIT3 is used to quickly and easily check the cleanliness of surfaces and water. The  surface testing ATP Testing Meter displays a measurement result on the large LC display after only 10 seconds. Up to 10,000 measurement data sets with time and date can be stored on the internal memory of the ATP measuring device.

  • Measuring width: 0 … 999,999 RLU
  • Fast hygiene tests in just 10 seconds
  • USB and Bluetooth printer interface
  • Automatic calibration
  • For HACCP implementation
  • Data storage
  • Incl. 100 Test tubes (swabs) for surfaces
  • Incl. 100 Test tubes (swabs) for water
Digital Force Gauge PCE-DFG 20K XF
US$ 2,454.00
ex. VAT, ex. delivery costs
The Digital Force Gauge with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Digital Force Gauge or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

  • measurement range: 0 ... 20 kN
  • resolution: 2 N
  • accuracy: ±0.05 % FS
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • graphic display
  • sampling rate: 1 ... 7,200 Hz
Force Gage PCE-DFG 20K XF
US$ 2,454.00
ex. VAT, ex. delivery costs
The Force Gage with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gage or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

  • measurement range: 0 ... 20 kN
  • resolution: 2 N
  • accuracy: ±0.05 % FS
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • graphic display
  • sampling rate: 1 ... 7,200 Hz
Force Gage PCE-DFG 50K XF
US$ 2,454.00
ex. VAT, ex. delivery costs
The Force Gage with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gage or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

  • measurement range: 0 ... 50 kN
  • resolution: 5 N
  • accuracy: ±0.05 % FS
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • graphic display
  • sampling rate: 1 ... 7,200 Hz
Force Gauge PCE-DFG 50K XF
US$ 2,454.00
ex. VAT, ex. delivery costs
The Force Gauge with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gauge or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

  • measurement range: 0 ... 50 kN
  • resolution: 5 N
  • accuracy: ±0.05 % FS
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • graphic display
  • sampling rate: 1 ... 7,200 Hz