The Material Hardness Tester for Metal PCE-2600N is used wherever a fast hardness test has to be carried out. It is possible to use the material tester PCE-2600N to determine the surface hardness of many metals. The material tester PCE-2600N is especially suitable for quality or product inspection.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.8%
• Impactor: DL
• Display: 128 x 64 OLED

The environmental tester kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Environmental tester PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferEnvironmental tester PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

PCE-PA 8000 is a portable handheld power analyzer used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

• True RMS measurement for ACA, ACV
• True power: W, KW, MW
• VA, KVA, MVA, VAR, KVAR, MVAR
• PF (power factor), phase angle (Φ)
• KWH, KVAH, KVARH, PFH
• Voltage measurement range: 10 … 600 ACV
• Current measurement range: 0.2 … 1200 ACA
• Real-time current, voltage and power consumption measurement
• Built-in data recorder with adjustable sample rate: 2 … 7,200 sec.

The Photovoltaic Tester kit is a useful tool to examine solar cells for their characteristic curves. This enables a statement to be made about the composition and design of a photovoltaic system.

Photovoltaic Tester PCE-PVA 100

• Measuring range: 0 … 12 A DC
• Three different test functions
• PC interface for data transferSolar measuring device PCE-SPM 1
• Measuring range: 0 … 2000 W/m²
• Resolution: 1 W/m²
• Accuracy: ± 10 W/m² or ± 5%
• Data memory: 32,000 measured values
• Application, e.g .: photovoltaic systems

PCE-PA 8000 is a portable handheld power analyzer used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

• True RMS measurement for ACA, ACV
• True power: W, KW, MW
• VA, KVA, MVA, VAR, KVAR, MVAR
• PF (power factor), phase angle (Φ)
• KWH, KVAH, KVARH, PFH
• Voltage measurement range: 10 … 600 ACV
• Current measurement range: 0.2 … 1200 ACA
• Real-time current, voltage and power consumption measurement
• Built-in data recorder with adjustable sample rate: 2 … 7,200 sec.

• measurement range up to 180 km/h
• input: pulse, analogue (4 ... 20 mA) or radio transmission
• 4 ... 20 mA analogue output
• supply voltage: 110 ... 230 V AC , 50 / 60 Hz
• ambient temperature -20 ... 70°C / −4 … 158°F 
• units adjustable: km/h, mph, m/s
• protection class: IP65
• alarm relay
• data logger

• measurement range up to 180 km/h
• input: pulse, analogue (4 ... 20 mA) or radio transmission
• 4 ... 20 mA analogue output
• supply voltage: 24 V DC
• ambient temperature -20 ... 70°C / −4 … 158°F
• units adjustable: km/h, mph, m/s
• protection class: IP65
• alarm relay
• data logger

The Material Hardness Tester for Metal PCE-2600N is used wherever a fast hardness test has to be carried out. It is possible to use the material tester PCE-2600N to determine the surface hardness of many metals. The material tester PCE-2600N is especially suitable for quality or product inspection.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.8%
• Impactor: DL
• Display: 128 x 64 OLED

The Portable Metal Hardness Tester PCE-2600N is used wherever a fast hardness test has to be carried out. It is possible to use the hardness tester PCE-2600N to determine the surface hardness of many metals. The hardness tester PCE-2600N is especially suitable for quality or product inspection.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.8%
• Impactor: DL
• Display: 128 x 64 OLED

PCE-ATP 1 is a Hygiene Tester, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

PCE-ATP 1 is a food safety / hygiene - ATP tester, ATP meter, lumitester or luminometer used for surface testing. This luminometer allows for quick and easy first-generation adenosine triphosphate (ATP) testing and monitoring to ensure proper cleanliness, sterilization and sanitization. PCE-ATP 1 is an ATP tester that can be used for cleanliness control and documentation in many different applications.

• Measurement range: 0 … 999,999 relative light units (RLUs)
• Stores up to 10,000 date- and time-stamped data records to internal memory
• Enables rapid detection of bacterial or microbial residue

• Turbidity: 0.001 ... 40 / 40 ... 100 NTU
• Resolution: 0.001 / 0.1 NTU
• Accuracy: ±2% of reading / ±5% of reading
• Repeatability: ±2%
• Protection rating IP65
• Power supply: 12V DC
• Suitable for salt water

The Handheld Roughness Tester is used to determine surface roughness. The compact surface roughness tester is a handheld device for mobile use. Due to the power supply via a powerful battery, it can be used directly on site. The handheld roughness tester is used in the laboratory, in production and everywhere where the roughness of surfaces is to be determined.

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor

The Portable Metal Hardness Tester PCE-2600N is used wherever a fast hardness test has to be carried out. It is possible to use the hardness tester PCE-2600N to determine the surface hardness of many metals. The hardness tester PCE-2600N is especially suitable for quality or product inspection.

• Measurement according to Leeb Rebound method
• Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
• Measurement ranges: 170-960 HLD, 59.1-88 HRA, 3.5-101.7 HRB, 17.9-69.5 HRC, 19-683 HB, 80-1042 HV, 30.6-102.6 HS 
• Accuracy: ± 0.5%, Repeatability: ± 0.8%
• Impactor: DL
• Display: 128 x 64 OLED

The Roughness Tester PCE-RT 10-ICA is a small, light device with simple navigation. Despite the fact that the device functions on a very complex and elaborate level, the measurement results can be acquired quickly and in an accurate way. Very simple to operate with a motorized diamond sensor.

• Measures Ra in Metric (µm) and Imperial (µinch)
• Ra 0.05 to 10um / 2 µinch … 400 µinch measurement range
• Rz 0.1 to 50um / 3.93 µinch … 1968.50 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• With threshold function
• Uses 4 AA Batteries (Included)
• Incl. ISO calibration certificate

The simple design and an absolutely straightforward operation make it possible for the practitioner to use the adhesion tester as an instrument for daily adhesion tests. Using adhesive with rapid curing, the tests can be performed by the user in the shortest possible time.

• Breakout force: 200 kg
• Diameter of base dolly, mm: 15.1 (№ 1) and 19.5 (№ 2)
• Specific breakout force, MPa: Dolly №1 up to 10 MPa (100) Dolly  №2 up to 6 MPa (60)

• Measures Ra, Rz, Rq and Rt in Metric (µm) and Imperial (µinch)
• Ra, Rq: 0.005 … 16.00 μm / 0.197µinch… 629.921 µinch measurement range
• Rz, Rt: 0.002 … 200.0 μm / 0.079µinch… 7874.016 µinch measurement range
• Induction method with Diamond sensor
• Accuracy < ± 10% and Repeatability < 6%
• Saves up to 20 Data points
• Micro-USB interface
• Built-in rechargeable li-ion battery

The multiway automotive tester / borescope with a cable length of one metre and a camera head diameter of 6 mm is the ideal tool for endoscopy. The LED illuminance on the camera head can be adjusted in 5 steps up to 25,000 lux.

• Multiway 360° rotation head
• Camera diameter: 6 mm / 0.23"
• Cable length: 1 m / 39"
• Camera pixels: 1,000,000
• Depth of field: 7 … 110 mm / 0.27 … 4.33"
• Mini-HDMI interface for image output

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN65 (72 ... 80 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN65 (59 ... 67 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN65 (72 ... 80 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN65 (59 ... 67 mm)

• measurement range: 0 ... 10 kN
• resolution: 2 N
• accuracy: ±0.05 % FS
• 32 GB memory for 30 million measuring points
• USB-C interface
• graphic display
• sampling rate: 1 ... 7,200 Hz

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for PVC pipes
• pipe size: DN50 (59 ... 67 mm)

• flow rate: 0.03 ... 5 m/s
• accuracy: ±2 % of Rd
• resolution: 0.01 m/s
• repeatability: 0.2 %
• display of the volume flow
• for copper pipes
• pipe size: DN50 (46 ... 54 mm)