• Cable length: 1 m / 3.3 ft
• Camera head: Ø 6.2 mm / 0.24 in
• 2-way camera probe
• Image and video recording
• Max. resolution 1920 x 1080
• 32 GB micro SD card
• Integrated microphone in the device

The Environmental Tester PCE-THA 10 is easy to operate with one hand thanks to its compact size, the new structure and integrated impeller. In addition to the wind speed, the Environmental Tester measures the temperature, humidity, dew point, the wet bulb temperature and the air volume. Average values can be determined with the Environmental Tester from the 20 preset points. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.

• Temperature measuring range: -15 … 50°C / 5 … 122°F
• Humidity range: 5 … 95% RH
• Air speed: 0.4 … 35 m / s
• Air flow: 0 … 9.999 m³ / s

• insulation resistance: 1 MΩ ... 200 GΩ
• resolution: 0.01 MΩ
• accuracy: ±(5 % of Rd. +10 digits)
• test voltages: 250 ... 2500 V
• voltage measurement: 10 ... 600 V
• resolution: 1 V
• accuracy: +(0.8 % of Rd. +5 digits)

• Cable length: 1 m / 3.3 ft
• Camera head: Ø 6.2 mm / 0.24 in
• 2-way camera probe
• Image and video recording
• Max. resolution 1920 x 1080
• 32 GB micro SD card
• Integrated microphone in the device

The Material Tester PCE-CRC 10 is designed to determine the quality of the adhesion of coatings. The Material Tester is suitable for thin, thick or tough coatings on all surfaces. Since the adherence of paintings and other coatings is a crucial product and quality characteristic for their protective effect, material testers are used in a wide range of industries.

• Evaluation of adhesion
• For thin, thick or tough coatings
• Large, non-slip grip
• Various blades selectable

• Evaluation of adhesion
• For thin, thick or tough coatings
• Large, non-slip grip
• Various blades selectable

This environmental tester with outside sensor is a real all-rounder. The wireless environmental tester with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless environmental tester and outside sensors. The weather data of the environmental tester with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.

• Indoor temperature in Celsius or Fahrenheit
• Outside temperature in Celsius or Fahrenheit
• Indoor air humidity / outdoor air humidity
• Air pressure gauge in inHg or hPa
• Absolute or relative air pressure display selectable
• Precipitation indication in mm or inch
• Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
• Wind speed in mph, km / h, m / s, knots …
• Wind direction indicator
• Wind chill temperature gauge
• Weather forecast, trend indicator, storm warning
• and much more…

• insulation resistance: 1 MΩ ... 200 GΩ
• resolution: 0.01 MΩ
• accuracy: ±(5 % of Rd. +10 digits)
• test voltages: 250 ... 2500 V
• voltage measurement: 10 ... 600 V
• resolution: 1 V
• accuracy: +(0.8 % of Rd. +5 digits)

• measurement range -1 ... +1 kPa (-10 ... +10 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -100 ... +100 kPa (-1 ... +1 bar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -2 ... +2 kPa (-20 ... +20 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -4 ... +4 kPa (-40 ... +40 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -50 ... +50 kPa (-500 ... +500 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• Cable length: 1 m / 3.3 ft
• Camera head: Ø 6.2 mm / 0.24 in
• 2-way camera probe
• Image and video recording
• Max. resolution 1920 x 1080
• 32 GB micro SD card
• Integrated microphone in the device

• Sound level: 30 ... 120 dBA
• Resolution: 1 dB
• Accuracy: 2% FS ±0.5 dB (based on 94 dB @ 1 kHz)
• Frequency range: 20 ... 12500 Hz
• Protection class: IP65

The earth tester / earth resistance meter is a handy measuring device. Due to the robust and ergonomic design, the user can work comfortably with the earth tester. The earthing resistance can be determined quickly with the earth resistance meter.

• Measuring range: 0 … 2000 Ω
• Measuring principle: Continuity test / earth resistance measurement
• Multi-coloured, backlit LCD
• Installation category III
• 50/60 Hz operating voltage

• Measuring range: 0.0 … 14.0 pH
• Resolution: 0.01 pH
• Accuracy: ± 0.02 pH
• 100 points Datalogger
• (ATC) in the range 0 … 80°C / 32 … 176°F
• Waterproof to IP 67
• Incl. ISO calibration certificate

The environmental tester is a handheld digital device to measure temperature in the HVAC sector, as for instance in heating ducts, air conditioning vents, insulation, crawl spaces, etc., thanks to its 120 mm / 4.7 in stainless steel probe. The environmental tester is very easy to use, with small dimensions and short response time.

• Measuring range:  -40 … 250°C / -40 … 482°F
• Indication of max. and min. values
• Data function
• Lock for continuous operation
• Measured value in ºC or ºF
• incl. ISO-Calibration Cerificate

• Evaluation of adhesion
• For thin, thick or tough coatings
• Large, non-slip grip
• Various blades selectable

The Surface Tester PCE-CRC 10 is designed to determine the quality of the adhesion of coatings. The Surface Tester is suitable for thin, thick or tough coatings on all surfaces. Since the adherence of paintings and other coatings is a crucial product and quality characteristic for their protective effect, surface testers are used in a wide range of industries.

• Evaluation of adhesion
• For thin, thick or tough coatings
• Large, non-slip grip
• Various blades selectable

The PCE-S 41 Mechanics Stethoscope is battery powered and easy to use. This Mechanics Stethoscope can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

• Frequency range: 100 Hz to 10 kHz
• Headphones, 70 mm long sensor, 290 mm long sensor, battery, carrying case
• Weight: 240 g, with battery
• Dimensions: 206 mm x 50 mm x 32 mm

The Easycount-1-CEE-G energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-CEE-G energy meter are equipped with male and female connectors.

• Calibrated counter
• Voltage input: 230 VAC
• Current rating: 16 A
• Frequency: 50 HZ

The Easycount-1-Schuko-G energy meter is an electricity meter for alternating voltages up to 230 V, enclosed in a splash-proof and impact-resistant housing. The cable ends of the Easycount-1-Schuko-G energy meter are equipped with male and female connectors.

• Calibrated counter
• Voltage input: 230 VAC
• Current rating: 16 A
• Frequency: 50 HZ

The HVAC Meter PCE-THA 10 is easy to operate with one hand thanks to its compact size, the new structure and integrated impeller. In addition to the wind speed, the HVAC Meter measures the temperature, humidity, dew point, the wet bulb temperature and the air volume.

• Temperature measuring range: -15 … 50°C / 5 … 122°F
• Humidity range: 5 … 95% RH
• Air speed: 0.4 … 35 m / s
• Air flow: 0 … 9.999 m³ / s