Zum Hauptinhalt springen
Durometer for Metals PCE-2800
US$ 1,967.00
ex. VAT, ex. delivery costs

PCE-2800 is a portable handheld material hardness tester or durometer designed for the quick and easy surface hardness testing of metals. This user-friendly device displays measurements in Rockwell A, B & C (HRA, HRB & HRC), Vickers (HV), Brinell (HB), Shore (HS) and Leeb (HLD) hardness units. It also indicates the tensile strength (N / mm²).

- Measurement according to Leeb Rebound method
- Measurement units: HLD, HRA, HRB, HRC, HB, HV, HS
- Measurement ranges: 350-800 HLD, 59.1-85.8 HRA, 13.5-101.7 HRB, 20-68.5 HRC, 19-651 HB, 80-976 HV, , 32.2-99.5 HS, 374-2652 (N / mm²)
- Accuracy: ± 0.8%, Repeatability: ± 0.8%
- Impact Device: Type D (external probe with 1.5 m / .06 in long cable)
- Data interface: USB 1.1 port; Internal memory: Stores up to 100 data sets
PC-compatible software and data cable for analysis, reporting and archival.
- Printer is built into the device

Environmental Meter PCE-TUM 150SW
US$ 2,223.00
ex. VAT, ex. delivery costs
The Environmental Meter is used for continuous online monitoring of water turbidity in drinking water systems, filtration systems and direct drinking water systems. The Environmental Meter has a measuring range of 0.001 ... 100 NTU and enables high-resolution detection of even very low turbidity values. The device is also suitable for use in fresh water and sea water applications.

  • Turbidity: 0.001 ... 40 / 40 ... 100 NTU
  • Resolution: 0.001 / 0.1 NTU
  • Accuracy: ±2% of reading / ±5% of reading
  • Repeatability: ±2%
  • Protection rating IP65
  • Power supply: 12V DC
  • Suitable for salt water
Environmental Tester PCE-TUM 150SW
US$ 2,223.00
ex. VAT, ex. delivery costs
The Environmental Tester is used for continuous online monitoring of water turbidity in drinking water systems, filtration systems and direct drinking water systems. The Environmental Tester has a measuring range of 0.001 ... 100 NTU and enables high-resolution detection of even very low turbidity values. The device is also suitable for use in fresh water and sea water applications.

  • Turbidity: 0.001 ... 40 / 40 ... 100 NTU
  • Resolution: 0.001 / 0.1 NTU
  • Accuracy: ±2% of reading / ±5% of reading
  • Repeatability: ±2%
  • Protection rating IP65
  • Power supply: 12V DC
  • Suitable for salt water
Turbidity Meter PCE-TUM 150SW
US$ 2,223.00
ex. VAT, ex. delivery costs
The Turbidity Meter is used for continuous online monitoring of water turbidity in drinking water systems, filtration systems and direct drinking water systems. The Turbidity Meter has a measuring range of 0.001 ... 100 NTU and enables high-resolution detection of even very low turbidity values. The device is also suitable for use in fresh water and sea water applications.

  • Turbidity: 0.001 ... 40 / 40 ... 100 NTU
  • Resolution: 0.001 / 0.1 NTU
  • Accuracy: ±2% of reading / ±5% of reading
  • Repeatability: ±2%
  • Protection rating IP65
  • Power supply: 12V DC
  • Suitable for salt water
Water Analyser PCE-TUM 150SW
US$ 2,223.00
ex. VAT, ex. delivery costs
The Water Analyser is used for continuous online monitoring of water turbidity in drinking water systems, filtration systems and direct drinking water systems. The Water Analyser has a measuring range of 0.001 ... 100 NTU and enables high-resolution detection of even very low turbidity values. The device is also suitable for use in fresh water and sea water applications.

  • Turbidity: 0.001 ... 40 / 40 ... 100 NTU
  • Resolution: 0.001 / 0.1 NTU
  • Accuracy: ±2% of reading / ±5% of reading
  • Repeatability: ±2%
  • Protection rating IP65
  • Power supply: 12V DC
  • Suitable for salt water
Water Analysis Meter PCE-TUM 150SW
US$ 2,223.00
ex. VAT, ex. delivery costs
The Water Analysis Meter is used for continuous online monitoring of water turbidity in drinking water systems, filtration systems and direct drinking water systems. The Water Analysis Meter has a measuring range of 0.001 ... 100 NTU and enables high-resolution detection of even very low turbidity values. The device is also suitable for use in fresh water and sea water applications.

  • Turbidity: 0.001 ... 40 / 40 ... 100 NTU
  • Resolution: 0.001 / 0.1 NTU
  • Accuracy: ±2% of reading / ±5% of reading
  • Repeatability: ±2%
  • Protection rating IP65
  • Power supply: 12V DC
  • Suitable for salt water
Automotive Tester PCE-CT 90
US$ 2,220.00
ex. VAT, ex. delivery costs
The automotive tester is a versatile measuring device. This is made possible by the various optional sensors on the automotive tester. Thanks to the surface temperature sensor, the automotive tester can be used to determine the surface temperature of an object within a measuring range of -50 … 125°C / -58 … 257°F. 

  • Measuring range standard sensor : 0 … 6 cm (Fe and non-Fe)
  • Automatic sensor detection
  • Zero point and one-point calibration
  • Various sensors (optional selectable)
Coating Thickness Gauge PCE-CT 90
US$ 2,220.00
ex. VAT, ex. delivery costs
The coating thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the coating thickness gauge. Thanks to the surface temperature sensor, the coating thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Condition Monitoring Surface Tester PCE-CT 90
US$ 2,220.00
ex. VAT, ex. delivery costs
The condition monitoring surface tester is a versatile measuring device. This is made possible by the various optional sensors on the condition monitoring surface tester. Thanks to the surface temperature sensor, the condition monitoring surface tester can be used to determine the surface temperature of an object within a measuring range of -50 … 125°C / -58 … 257°F. 

  • Measuring range standard sensor : 0 … 6 cm (Fe and non-Fe)
  • Automatic sensor detection
  • Zero point and one-point calibration
  • Various sensors (optional selectable)
Material Tester PCE-CT 90
US$ 2,220.00
ex. VAT, ex. delivery costs
The material tester is a versatile measuring device. This is made possible by the various optional sensors on the material tester. Thanks to the surface temperature sensor, the material tester can be used to determine the surface temperature of an object within a measuring range of -50 … 125°C / -58 … 257°F. 

  • Measuring range standard sensor : 0 … 6 cm (Fe and non-Fe)
  • Automatic sensor detection
  • Zero point and one-point calibration
  • Various sensors (optional selectable)
NDT Tester PCE-CT 90
US$ 2,220.00
ex. VAT, ex. delivery costs
The NDT tester is a versatile measuring device. This is made possible by the various optional sensors on the NDT tester. Thanks to the surface temperature sensor, the NDT tester can be used to determine the surface temperature of an object within a measuring range of -50 … 125°C / -58 … 257°F. 

  • Measuring range standard sensor : 0 … 6 cm (Fe and non-Fe)
  • Automatic sensor detection
  • Zero point and one-point calibration
  • Various sensors (optional selectable)
Paint Thickness Gauge PCE-CT 90
US$ 2,220.00
ex. VAT, ex. delivery costs
The paint thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the paint thickness gauge. Thanks to the surface temperature sensor, the paint thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 … 125°C / -58 … 257°F. 

  • Measuring range standard sensor : 0 … 6 cm (Fe and non-Fe)
  • Automatic sensor detection
  • Zero point and one-point calibration
  • Various sensors (optional selectable)
Paint Thickness Tester PCE-CT 90
US$ 2,220.00
ex. VAT, ex. delivery costs
The thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the thickness gauge. Thanks to the surface temperature sensor, the thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 … 125°C / -58 … 257°F. 

  • Measuring range standard sensor : 0 … 6 cm (Fe and non-Fe)
  • Automatic sensor detection
  • Zero point and one-point calibration
  • Various sensors (optional selectable)
Surface Tester PCE-CT 90
US$ 2,220.00
ex. VAT, ex. delivery costs
The surface tester is a versatile measuring device. This is made possible by the various optional sensors on the surface tester. Thanks to the surface temperature sensor, the surface tester can be used to determine the surface temperature of an object within a measuring range of -50 … 125°C / -58 … 257°F. 

  • Measuring range standard sensor : 0 … 6 cm (Fe and non-Fe)
  • Automatic sensor detection
  • Zero point and one-point calibration
  • Various sensors (optional selectable)
Thickness Gauge PCE-CT 90
US$ 2,220.00
ex. VAT, ex. delivery costs
The thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the thickness gauge. Thanks to the surface temperature sensor, the thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 … 125°C / -58 … 257°F. 

  • Measuring range standard sensor : 0 … 6 cm (Fe and non-Fe)
  • Automatic sensor detection
  • Zero point and one-point calibration
  • Various sensors (optional selectable)
Thickness Meter PCE-CT 90
US$ 2,220.00
ex. VAT, ex. delivery costs
The Thickness Meter is a versatile measuring device. This is made possible by the various optional sensors on the Thickness Meter. Thanks to the surface temperature sensor, the Thickness Meter can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 6 cm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Ultrasonic Thickness Tester PCE-CT 90
US$ 2,220.00
ex. VAT, ex. delivery costs
The ultrasonic thickness tester is a versatile measuring device. This is made possible by the various optional sensors on the ultrasonic thickness tester. Thanks to the surface temperature sensor, the ultrasonic thickness tester can be used to determine the surface temperature of an object within a measuring range of -50 … 125°C / -58 … 257°F. 

  • Measuring range standard sensor : 0 … 6 cm (Fe and non-Fe)
  • Automatic sensor detection
  • Zero point and one-point calibration
  • Various sensors (optional selectable)
Gloss Meter PCE-SGM 60-ICA incl. ISO calibration certificate
US$ 2,214.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Gloss Meter PCE-SGM 60-ICA incl. ISO calibration certificate
US$ 2,214.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Gloss Test Instrument PCE-SGM 60-ICA incl. ISO calibration certificate
US$ 2,214.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. These gloss test instruments allow you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Paint Gloss Tester PCE-SGM 60-ICA incl. ISO calibration certificate
US$ 2,214.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Surface Testing - Gloss Meter PCE-SGM 60-ICA incl. ISO calibration certificate
US$ 2,214.00
ex. VAT, ex. delivery costs
ISO Calibration

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


  • Measurement geometry: 60° degree angle
  • Measurement up to 1000 gloss units
  • Internal reading memory up to 5000 readings
  • 3.5" TFT display
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Dynamometer PCE-DFG 100K X
US$ 2,205.00
ex. VAT, ex. delivery costs
The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The dynamometer is supplied with an external measuring cell and can measure forces of up to 100 kN.

  • Measuring range: 0 … 100 kN / 0 ... 100000 N / 0 ... 22480.9 lbf
  • Resolution: 10 N / 2.2 lbf
  • Accuracy: ±0.05% F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 … 7200 Hz
Force Gage PCE-DFG 20K X-ICA incl. ISO-Calibration Certificate
US$ 2,205.00
ex. VAT, ex. delivery costs
ISO Calibration
The Force Gage records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Force Gage is supplied with an external measuring cell and can measure forces of up to 20 kN.

  • Measuring range: 0 ... 20 kN
  • Resolution: 2 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Force Gage PCE-DFG 50K X-ICA incl. ISO-Calibration Certificate
US$ 2,205.00
ex. VAT, ex. delivery costs
ISO Calibration
The Force Gage records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.

  • Measuring range: 0 ... 50 kN
  • Resolution: 5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Force Gauge / Digital Force Gauge PCE-DFG 20K X-ICA incl. ISO-Calibration Certificate
US$ 2,205.00
ex. VAT, ex. delivery costs
ISO Calibration
The Force Gauge / Digital Force Gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Force Gauge / Digital Force Gauge is supplied with an external measuring cell and can measure forces of up to 20 kN.

  • Measuring range: 0 ... 20 kN
  • Resolution: 2 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Force Gauge / Digital Force Gauge PCE-DFG 50K X-ICA incl. ISO-Calibration Certificate
US$ 2,205.00
ex. VAT, ex. delivery costs
ISO Calibration
The Force Gauge / Digital Force Gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.

  • Measuring range: 0 ... 50 kN
  • Resolution: 5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Force Gauge PCE-DFG 100K X
US$ 2,205.00
ex. VAT, ex. delivery costs
The force measuring device records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 100 kN.

  • Measuring range: 0 … 100 kN / 0 ... 100000 N / 0 ... 22480.9 lbf
  • Resolution: 10 N / 2.2 lbf
  • Accuracy: ±0.05% F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 … 7200 Hz
Gloss Meter PCE-IGM 60 ICA incl. ISO calibration certificate
US$ 2,205.00
ex. VAT, ex. delivery costs
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


  • Measurement geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

NDT Test Instruments PCE-IGM 60 ICA incl. ISO calibration certificate
US$ 2,205.00
ex. VAT, ex. delivery costs
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


  • Measurement geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Paint Gloss Tester PCE-IGM 60 ICA incl. ISO calibration certificate
US$ 2,205.00
ex. VAT, ex. delivery costs
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


  • Measurement geometry: 60° degree angle
  • Measuring range: 0 … 300 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Surface Testing - Gloss Meter PCE-IGM 60 ICA incl. ISO calibration certificate
US$ 2,205.00
ex. VAT, ex. delivery costs
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


  • Measurement geometry: 60° degree angle
  • Measuring range: 0 … 1000 GU
  • Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
  • Light source: D65
  • Wave length: 400-700 nm
  •  Incl. ISO calibration certificate

Tensile Tester PCE-DFG 20K X-ICA incl. ISO-Calibration Certificate
US$ 2,205.00
ex. VAT, ex. delivery costs
ISO Calibration
The Tensile Tester records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Tensile Tester is supplied with an external measuring cell and can measure forces of up to 20 kN.

  • Measuring range: 0 ... 20 kN
  • Resolution: 2 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Tensile Tester PCE-DFG 50K X-ICA incl. ISO-Calibration Certificate
US$ 2,205.00
ex. VAT, ex. delivery costs
ISO Calibration
The Tensile Tester records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.

  • Measuring range: 0 ... 50 kN
  • Resolution: 5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Tension Dynamometer / Tension Load Cell PCE-DFG 20K X-ICA incl. ISO-Calibration Certificate
US$ 2,205.00
ex. VAT, ex. delivery costs
ISO Calibration
The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell is supplied with an external measuring cell and can measure forces of up to 20 kN.

  • Measuring range: 0 ... 20 kN
  • Resolution: 2 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate
Tension Dynamometer / Tension Load Cell PCE-DFG 50K X-ICA incl. ISO-Calibration Certificate
US$ 2,205.00
ex. VAT, ex. delivery costs
ISO Calibration
The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.

  • Measuring range: 0 ... 50 kN
  • Resolution: 5 N
  • Accuracy: ±0.05 % F.S.
  • 32 GB memory for 30 million measuring points
  • USB-C interface
  • Graphic display
  • Measuring rate: 1 ... 7200 Hz
  • incl. ISO-Calibration Certificate