Query results | PCE Instruments

US$ 2,211.00

ex. VAT, ex. delivery costs

The accelerometer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the accelerometer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
Automatic ISO 10816-3 evaluation
Data logger: 50 memory locations with 43200 measured values each
FFT analysis
Route measurement
Rechargeable battery
Color graphic display
incl. headset

Clamp Meter PCE-360

US$ 2,211.00

ex. VAT, ex. delivery costs

The PCE-360 is a Single-Phase Power Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

Measuring range: 10 … 999.9 V
AC voltage AC
Alternating current AC
Active power
Power factor
Phase angle
Frequency
Harmonic measurement
Data memory: 512 kB (non-volatile memory)
incl. 4 current clamps / tapping terminals
Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate

Clamp-On Tester PCE-360

US$ 2,211.00

ex. VAT, ex. delivery costs

Measuring range: 10 … 999.9 V
AC voltage AC
Alternating current AC
Active power
Power factor
Phase angle
Frequency
Harmonic measurement
Data memory: 512 kB (non-volatile memory)
incl. 4 current clamps / tapping terminals
Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate

Condition Monitoring Vibration Meter PCE-VT 3950

US$ 2,211.00

ex. VAT, ex. delivery costs

The condition monitoring vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the condition monitoring vibration meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
Automatic ISO 10816-3 evaluation
Data logger: 50 memory locations with 43200 measured values each
FFT analysis
Route measurement
Rechargeable battery
Color graphic display
incl. headset

Current Clamp PCE-360

US$ 2,211.00

ex. VAT, ex. delivery costs

Measuring range: 10 … 999.9 V
AC voltage AC
Alternating current AC
Active power
Power factor
Phase angle
Frequency
Harmonic measurement
Data memory: 512 kB (non-volatile memory)
incl. 4 current clamps / tapping terminals
Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate

Electrical Tester PCE-360

US$ 2,211.00

ex. VAT, ex. delivery costs

Measuring range: 10 … 999.9 V
AC voltage AC
Alternating current AC
Active power
Power factor
Phase angle
Frequency
Harmonic measurement
Data memory: 512 kB (non-volatile memory)
incl. 4 current clamps / tapping terminals
Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate

HVAC Meter PCE-360

US$ 2,211.00

ex. VAT, ex. delivery costs

Measuring range: 10 … 999.9 V
AC voltage AC
Alternating current AC
Active power
Power factor
Phase angle
Frequency
Harmonic measurement
Data memory: 512 kB (non-volatile memory)
incl. 4 current clamps / tapping terminals
Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate

HVAC Meter PCE-VT 3950

US$ 2,211.00

ex. VAT, ex. delivery costs

The HVAC meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the HVAC meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
Automatic ISO 10816-3 evaluation
Data logger: 50 memory locations with 43200 measured values each
FFT analysis
Route measurement
Rechargeable battery
Color graphic display
incl. headset

Portable Power Analyzer PCE-360

US$ 2,211.00

ex. VAT, ex. delivery costs

Measuring range: 10 … 999.9 V
AC voltage AC
Alternating current AC
Active power
Power factor
Phase angle
Frequency
Harmonic measurement
Data memory: 512 kB (non-volatile memory)
incl. 4 current clamps / tapping terminals
Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate

Power Meter PCE-360

US$ 2,211.00

ex. VAT, ex. delivery costs

Measuring range: 10 … 999.9 V
AC voltage AC
Alternating current AC
Active power
Power factor
Phase angle
Frequency
Harmonic measurement
Data memory: 512 kB (non-volatile memory)
incl. 4 current clamps / tapping terminals
Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate

Power Quality Analyzer PCE-360

US$ 2,211.00

ex. VAT, ex. delivery costs

Measuring range: 10 … 999.9 V
AC voltage AC
Alternating current AC
Active power
Power factor
Phase angle
Frequency
Harmonic measurement
Data memory: 512 kB (non-volatile memory)
incl. 4 current clamps / tapping terminals
Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate

Single-Phase / 1-Phase Power Meter PCE-360

US$ 2,211.00

ex. VAT, ex. delivery costs

Measuring range: 10 … 999.9 V
AC voltage AC
Alternating current AC
Active power
Power factor
Phase angle
Frequency
Harmonic measurement
Data memory: 512 kB (non-volatile memory)
incl. 4 current clamps / tapping terminals
Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate

Three-Phase Power Data Logger PCE-360

US$ 2,211.00

ex. VAT, ex. delivery costs

Measuring range: 10 … 999.9 V
AC voltage AC
Alternating current AC
Active power
Power factor
Phase angle
Frequency
Harmonic measurement
Data memory: 512 kB (non-volatile memory)
incl. 4 current clamps / tapping terminals
Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate

Three-Phase Power Meter PCE-360

US$ 2,211.00

ex. VAT, ex. delivery costs

This device is a Three-Phase Power Meter / 3-Phase Power Analyzer with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.

Measuring range: 10 … 999.9 V
AC voltage AC
Alternating current AC
Active power
Power factor
Phase angle
Frequency
Harmonic measurement
Data memory: 512 kB (non-volatile memory)
incl. 4 current clamps / tapping terminals
Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate

Vibration Analyzer PCE-VT 3950

US$ 2,211.00

ex. VAT, ex. delivery costs

The vibration analyzer is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the vibration analyzer, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 in
Automatic ISO 10816-3 evaluation
Data logger: 50 memory locations with 43200 measured values each
FFT analysis
Route measurement
Rechargeable battery
Color graphic display
incl. headset

Vibration Meter PCE-VT 3950

US$ 2,211.00

ex. VAT, ex. delivery costs

The vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the vibration meter, such as RMS, peak, peak-peak and crest factor.

Measuring ranges

Acceleration:
0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
Velocity:
0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
Displacement:
0.000 … 3.9 mm / 0.000 - 0.154 in
Data logger
FFT analysis
Route measurement
Rechargeable battery
Color graphic display
incl. headset
Automatic ISO 10816-3 evaluation

Force Gage PCE-DFG 10K X-ICA incl. ISO-Calibration Certificate

US$ 2,209.00

ex. VAT, ex. delivery costs

The Force Gage records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 10,000 N.

Measuring range: 0 ... 10 kN
Resolution: 2 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measurement rate: 1 .... 7,200 Hz
incl. ISO-Calibration Certificate

Force Gage PCE-DFG 10K XF-ICA incl. ISO-Calibration Certificate

US$ 2,209.00

ex. VAT, ex. delivery costs

The Force Gage with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gage or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 10 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Force Gauge / Digital Force Gauge PCE-DFG 10K X-ICA incl. ISO-Calibration Certificate

US$ 2,209.00

ex. VAT, ex. delivery costs

The Force Gauge / Digital Force Gauge records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 10,000 N.

Measuring range: 0 ... 10 kN
Resolution: 2 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measurement rate: 1 .... 7,200 Hz
incl. ISO-Calibration Certificate

Force Gauge / Digital Force Gauge PCE-DFG 10K XF-ICA incl. ISO-Calibration Certificate

US$ 2,209.00

ex. VAT, ex. delivery costs

The Force Gauge / Digital Force Gauge with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Force Gauge / Digital Force Gauge or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 10 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Tensile Tester PCE-DFG 10K X-ICA incl. ISO-Calibration Certificate

US$ 2,209.00

ex. VAT, ex. delivery costs

The Tensile Tester records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 10,000 N.

Measuring range: 0 ... 10 kN
Resolution: 2 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measurement rate: 1 .... 7,200 Hz
incl. ISO-Calibration Certificate

Tensile Tester PCE-DFG 10K XF-ICA incl. ISO-Calibration Certificate

US$ 2,209.00

ex. VAT, ex. delivery costs

The Tensile Tester with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tensile Tester or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 10 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Tension Dynamometer / Tension Load Cell PCE-DFG 10K X-ICA incl. ISO-Calibration Certificate

US$ 2,209.00

ex. VAT, ex. delivery costs

The Tension Tension Dynamometer / Tension Load Cell / Tension Load Cell records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 10,000 N.

Measuring range: 0 ... 10 kN
Resolution: 2 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measurement rate: 1 .... 7,200 Hz
incl. ISO-Calibration Certificate

Tension Dynamometer / Tension Load Cell PCE-DFG 10K XF-ICA incl. ISO-Calibration Certificate

US$ 2,209.00

ex. VAT, ex. delivery costs

The Tension Dynamometer / Tension Load Cell with an external pressure load cell is designed for measuring compressive forces at measuring locations that are difficult to access. The Tension Dynamometer / Tension Load Cell or rather the pressure load cell has several threaded holes at the bottom that allow it to be mounted securely.

measurement range: 0 ... 10 kN
resolution: 2 N
accuracy: ±0.05 % FS
32 GB memory for 30 million measuring points
USB-C interface
graphic display
sampling rate: 1 ... 7,200 Hz
incl. ISO-Calibration Certificate

Universal Testing Machine PCE-HTS 50

US$ 2,206.00

ex. VAT, ex. delivery costs

The motorized tension-compression Universal Testing Machine is a motorized test station with a force range of up to 500 N. With the help of the horizontal Universal Testing Machine, it is possible to to carry out tension-compression tests.

Force range: 500 N / 50 kg / 110 lb
Distance display resolution: 0.02 mm
Resolution: 1 mm/min
Tensile and compression testing
Travel: 270 mm / 10.6"

ATP Tester PCE-ATP 1 KIT

US$ 2,204.00

ex. VAT, ex. delivery costs

The PCE-ATP 1-KIT is used to quickly and easily check the cleanliness of surfaces. The PCE-ATP 1 displays a measurement result on the large LC display after only 10 seconds. The PCE-ATP 1 internal memory stores up to 10,000 measured data sets with time and date.

Measuring width: 0 … 999,999 RLU
Fast hygiene tests in just 10 seconds
USB and Bluetooth printer interface
Automatic calibration
For HACCP implementation
Data storage
Enables rapid detection of bacterial or microbial residue
Incl. 100 Test tubes (swabs)

Food / Hygiene ATP Testing Meter PCE-ATP 1 KIT

US$ 2,204.00

ex. VAT, ex. delivery costs

Measuring width: 0 … 999,999 RLU
Fast hygiene tests in just 10 seconds
USB and Bluetooth printer interface
Automatic calibration
For HACCP implementation
Data storage
Enables rapid detection of bacterial or microbial residue
Incl. 100 Test tubes (swabs)

Food / Hygiene ATP Testing Meter PCE-ATP 1 KIT2 for water

US$ 2,204.00

ex. VAT, ex. delivery costs

The PCE-ATP 1-KIT3 is used to quickly and easily check the cleanliness of water. The ATP Testing Meter displays a measurement result on the large LC display after only 10 seconds. Up to 10,000 measurement data sets with time and date can be stored on the internal memory of the ATP measuring device.

Measuring width: 0 … 999,999 RLU
Fast hygiene tests in just 10 seconds
USB and Bluetooth printer interface
Automatic calibration
For HACCP implementation
Data storage
Incl. 100 Test tubes (swabs) for surfaces
Incl. 100 Test tubes (swabs) for water

Hygiene Tester PCE-ATP 1 KIT

US$ 2,204.00

ex. VAT, ex. delivery costs

Measuring width: 0 … 999,999 RLU
Fast hygiene tests in just 10 seconds
USB and Bluetooth printer interface
Automatic calibration
For HACCP implementation
Data storage
Enables rapid detection of bacterial or microbial residue
Incl. 100 Test tubes (swabs)

Hygiene Tester PCE-ATP 1 KIT2 for water

US$ 2,204.00

ex. VAT, ex. delivery costs

Measuring width: 0 … 999,999 RLU
Fast hygiene tests in just 10 seconds
USB and Bluetooth printer interface
Automatic calibration
For HACCP implementation
Data storage
Incl. 100 Test tubes (swabs) for surfaces
Incl. 100 Test tubes (swabs) for water

Luminometer PCE-ATP 1 KIT2 for water

US$ 2,204.00

ex. VAT, ex. delivery costs

The PCE-ATP 1-KIT3 is used to quickly and easily check the cleanliness of water. The luminometer displays a measurement result on the large LC display after only 10 seconds. Up to 10,000 measurement data sets with time and date can be stored on the internal memory of the ATP measuring device.

Measuring width: 0 … 999,999 RLU
Fast hygiene tests in just 10 seconds
USB and Bluetooth printer interface
Automatic calibration
For HACCP implementation
Data storage
Incl. 100 Test tubes (swabs) for surfaces
Incl. 100 Test tubes (swabs) for water

Surface Testing - ATP Meter PCE-ATP 1 KIT

US$ 2,204.00

ex. VAT, ex. delivery costs

Measuring width: 0 … 999,999 RLU
Fast hygiene tests in just 10 seconds
USB and Bluetooth printer option
Automatic calibration
For HACCP implementation
Data storage
Enables rapid detection of bacterial or microbial residue
Incl. 100 Test tubes or swabs

Electrical Tester PCE-MO 3001

US$ 2,198.00

ex. VAT, ex. delivery costs

Electrical Tester in a robust case with a resolution of up to 1 μΩ.

Four-wire method
Six selectable measuring ranges
Large LCD display
Max. Current is 1 A
Safety: EN 61010-1

Microohm-Meter PCE-MO 3001

US$ 2,198.00

ex. VAT, ex. delivery costs

Microohm-Meter in a robust case with a resolution of up to 1 μΩ.

Four-wire method
Six selectable measuring ranges
Large LCD display
Max. current is 1 A
Safety: EN 61010-1

Microohm-Meter PCE-MO 3001

US$ 2,198.00

ex. VAT, ex. delivery costs

The microohm meter PCE-MO 3001 is made to measure smallest electrical resistances. It uses four test cables that can be connected to the microohm meter. The microohm meter uses two test cables and a constant current source to allow stable current to flow within the measured device.

Four-wire method
Six selectable measuring ranges
Large LCD display
Max. current is 1 A
Safety: EN 61010-1

Calibrated Precision Balance PCE-ABI 120

US$ 2,191.00

ex. VAT, ex. delivery costs

The calibrated precision balance PCE-ABI 120 impresses with a very good price / performance ratio, high measuring accuracy and simple operation. This calibrated class I precision balance has an internal adjustment weight which ensures high measuring accuracy.

Weighing range [max]: 120 g
Readability: 0.1 mg (0.0001 g)
Calibration value: 0.001 g (1 mg)
Weighing plate: Ø 90mm
USB und RS-232 interface
Graphical display
Includes calibration M I