Query results | PCE Instruments

US$ 1,923.00

ex. VAT, ex. delivery costs

The Environmental Meter is used for continuous online monitoring of water turbidity in drinking water systems, filtration systems and direct drinking water systems. The Environmental Meter has a measuring range of 0.001 ... 100 NTU and enables high-resolution detection of even very low turbidity values.

Measuring range: 0.001 ... 40 / 40 ... 100 NTU
Resolution: 0.001 / 0.1 NTU
Accuracy: ±2% of rdg. / ±5% of rdg.
Repeatability: ±2%
Protection class IP65
Power supply: 12V DC
Suitable for fresh water

Environmental Tester PCE-TUM 150

US$ 1,923.00

ex. VAT, ex. delivery costs

The Environmental Tester is used for continuous online monitoring of water turbidity in drinking water systems, filtration systems and direct drinking water systems. The Environmental Tester has a measuring range of 0.001 ... 100 NTU and enables high-resolution detection of even very low turbidity values.

Measuring range: 0.001 ... 40 / 40 ... 100 NTU
Resolution: 0.001 / 0.1 NTU
Accuracy: ±2% of rdg. / ±5% of rdg.
Repeatability: ±2%
Protection class IP65
Power supply: 12V DC
Suitable for fresh water

Turbidity Meter PCE-TUM 150

US$ 1,923.00

ex. VAT, ex. delivery costs

The Turbidity Meter is used for continuous online monitoring of water turbidity in drinking water systems, filtration systems and direct drinking water systems. The Turbidity Meter has a measuring range of 0.001 ... 100 NTU and enables high-resolution detection of even very low turbidity values.

Measuring range: 0.001 ... 40 / 40 ... 100 NTU
Resolution: 0.001 / 0.1 NTU
Accuracy: ±2% of rdg. / ±5% of rdg.
Repeatability: ±2%
Protection class IP65
Power supply: 12V DC
Suitable for fresh water

Water Analyser PCE-TUM 150

US$ 1,923.00

ex. VAT, ex. delivery costs

The Water Analyser is used for continuous online monitoring of water turbidity in drinking water systems, filtration systems and direct drinking water systems. The Water Analyser has a measuring range of 0.001 ... 100 NTU and enables high-resolution detection of even very low turbidity values.

Measuring range: 0.001 ... 40 / 40 ... 100 NTU
Resolution: 0.001 / 0.1 NTU
Accuracy: ±2% of rdg. / ±5% of rdg.
Repeatability: ±2%
Protection class IP65
Power supply: 12V DC
Suitable for fresh water

Water Analysis Meter PCE-TUM 150

US$ 1,923.00

ex. VAT, ex. delivery costs

The Water Analysis Meter is used for continuous online monitoring of water turbidity in drinking water systems, filtration systems and direct drinking water systems. The Water Analysis Meter has a measuring range of 0.001 ... 100 NTU and enables high-resolution detection of even very low turbidity values.

Measuring range: 0.001 ... 40 / 40 ... 100 NTU
Resolution: 0.001 / 0.1 NTU
Accuracy: ±2% of rdg. / ±5% of rdg.
Repeatability: ±2%
Protection class IP65
Power supply: 12V DC
Suitable for fresh water

Condition Monitoring Stroboscope PCE-LES 400-ICA incl. ISO-Calibration Certificate

US$ 1,914.00

ex. VAT, ex. delivery costs

A Condition Monitoring Stroboscope is a device for permanent installation that generates rapid flashes of light with energy-efficient and long-lasting LEDs. With a wide measurement range of 50 ... 36,000 FPM, a high resolution of 0.1 FPM and an accuracy of 0.01 %, it offers precise and reliable measurements. Our Condition Monitoring Stroboscope can be triggered both internally and externally and supports four external trigger modes.

frequency: 50 ... 36000 FPM
resolution: 0.1 FPM
accuracy: ±0.01 % of Rd.
frequency: 1 ... 600 Hz
resolution: 0.01 Hz
accuracy: ±0.01 % of Rd.
flash duration 1 ... 3 %, max. 100 µs
trigger input
incl. ISO-Calibration Certificate

Rotation Meter PCE-LES 400-ICA incl. ISO-Calibration Certificate

US$ 1,914.00

ex. VAT, ex. delivery costs

A Rotation Meter is a device for permanent installation that generates rapid flashes of light with energy-efficient and long-lasting LEDs. With a wide measurement range of 50 ... 36,000 FPM, a high resolution of 0.1 FPM and an accuracy of 0.01 %, it offers precise and reliable measurements. Our Rotation Meter can be triggered both internally and externally and supports four external trigger modes.

frequency: 50 ... 36000 FPM
resolution: 0.1 FPM
accuracy: ±0.01 % of Rd.
frequency: 1 ... 600 Hz
resolution: 0.01 Hz
accuracy: ±0.01 % of Rd.
flash duration 1 ... 3 %, max. 100 µs
trigger input
incl. ISO-Calibration Certificate

Stroboscope / Stroboscope Light PCE-LES 400-ICA incl. ISO-Calibration Certificate

US$ 1,914.00

ex. VAT, ex. delivery costs

A Stroboscope / Stroboscope Light is a device for permanent installation that generates rapid flashes of light with energy-efficient and long-lasting LEDs. With a wide measurement range of 50 ... 36,000 FPM, a high resolution of 0.1 FPM and an accuracy of 0.01 %, it offers precise and reliable measurements. Our Stroboscope / Stroboscope Light can be triggered both internally and externally and supports four external trigger modes.

frequency: 50 ... 36000 FPM
resolution: 0.1 FPM
accuracy: ±0.01 % of Rd.
frequency: 1 ... 600 Hz
resolution: 0.01 Hz
accuracy: ±0.01 % of Rd.
flash duration 1 ... 3 %, max. 100 µs
trigger input
incl. ISO-Calibration Certificate

Tachometer PCE-LES 400-ICA incl. ISO-Calibration Certificate

US$ 1,914.00

ex. VAT, ex. delivery costs

A Tachometer is a device for permanent installation that generates rapid flashes of light with energy-efficient and long-lasting LEDs. With a wide measurement range of 50 ... 36,000 FPM, a high resolution of 0.1 FPM and an accuracy of 0.01 %, it offers precise and reliable measurements. Our Tachometer can be triggered both internally and externally and supports four external trigger modes.

frequency: 50 ... 36000 FPM
resolution: 0.1 FPM
accuracy: ±0.01 % of Rd.
frequency: 1 ... 600 Hz
resolution: 0.01 Hz
accuracy: ±0.01 % of Rd.
flash duration 1 ... 3 %, max. 100 µs
trigger input
incl. ISO-Calibration Certificate

Vibration Analyzer / Vibration Analyser PCE-LES 400-ICA incl. ISO-Calibration Certificate

US$ 1,914.00

ex. VAT, ex. delivery costs

A Vibration Analyzer / Vibration Analyser is a device for permanent installation that generates rapid flashes of light with energy-efficient and long-lasting LEDs. With a wide measurement range of 50 ... 36,000 FPM, a high resolution of 0.1 FPM and an accuracy of 0.01 %, it offers precise and reliable measurements. Our Vibration Analyzer / Vibration Analyser can be triggered both internally and externally and supports four external trigger modes.

frequency: 50 ... 36000 FPM
resolution: 0.1 FPM
accuracy: ±0.01 % of Rd.
frequency: 1 ... 600 Hz
resolution: 0.01 Hz
accuracy: ±0.01 % of Rd.
flash duration 1 ... 3 %, max. 100 µs
trigger input
incl. ISO-Calibration Certificate

Vibration Meter / Vibration Tester PCE-LES 400-ICA incl. ISO-Calibration Certificate

US$ 1,914.00

ex. VAT, ex. delivery costs

A Vibration Meter / Vibration Tester is a device for permanent installation that generates rapid flashes of light with energy-efficient and long-lasting LEDs. With a wide measurement range of 50 ... 36,000 FPM, a high resolution of 0.1 FPM and an accuracy of 0.01 %, it offers precise and reliable measurements. Our Vibration Meter / Vibration Tester can be triggered both internally and externally and supports four external trigger modes.

frequency: 50 ... 36000 FPM
resolution: 0.1 FPM
accuracy: ±0.01 % of Rd.
frequency: 1 ... 600 Hz
resolution: 0.01 Hz
accuracy: ±0.01 % of Rd.
flash duration 1 ... 3 %, max. 100 µs
trigger input
incl. ISO-Calibration Certificate

Automotive Tester LM-MCDX-52D

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Automotive Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Automotive Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism

Automotive Tester LM-MCDX-7F

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Automotive Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method of this Automotive Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 7000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
FE probe for thick layers with sliding sleeve and prism

Car Measuring Device LM-MCDX-52D

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Car Measuring Device. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Car Measuring Device allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism

Car Measuring Device LM-MCDX-7F

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Car Measuring Device. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method of this Car Measuring Device allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 7000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
FE probe for thick layers with sliding sleeve and prism

Coating Thickness Gauge LM-MCDX-52D

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Coating Thickness Gauge. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Coating Thickness Gauge allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism

Coating Thickness Gauge LM-MCDX-7F

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Coating Thickness Gauge. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method of this Coating Thickness Gauge allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 7000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
FE probe for thick layers with sliding sleeve and prism

Dynamometer PCE-DFG 20K X

US$ 1,905.00

ex. VAT, ex. delivery costs

The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The dynamometer is supplied with an external measuring cell and can measure forces of up to 20 kN.

Measuring range: 0 … 20 kN
Resolution: 2 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 … 7200 Hz

Dynamometer PCE-DFG 50K X

US$ 1,905.00

ex. VAT, ex. delivery costs

The dynamometer records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The device is supplied with an external measuring cell and can measure forces of up to 50 kN.

Measuring range: 0 … 50 kN
Resolution: 5 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 … 7200 Hz

Force Gauge PCE-DFG 20 X

US$ 1,905.00

ex. VAT, ex. delivery costs

The force measuring device records both tensile and compressive forces with extremely precise accuracy. Tensile and compressive forces are frequently measured in test laboratories, for example to determine yield points, tear-off force or the force required to actuate buttons or switches. The force gauge is supplied with an external measuring cell and can measure forces of up to 20 kN.

Measuring range: 0 … 20 kN
Resolution: 2 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 … 7200 Hz

Force Gauge PCE-DFG 50K X

US$ 1,905.00

ex. VAT, ex. delivery costs

Measuring range: 0 … 50 kN
Resolution: 5 N
Accuracy: ±0.05 % F.S.
32 GB memory for 30 million measuring points
USB-C interface
Graphic display
Measuring rate: 1 … 7200 Hz

Material Tester LM-MCDX-52D

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Material Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Material Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism

Material Tester LM-MCDX-7F

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Material Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method of this Material Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 7000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
FE probe for thick layers with sliding sleeve and prism

Material Thickness Meter LM-MCDX-52D

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Material Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Material Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism

Material Thickness Meter LM-MCDX-7F

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Material Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method of this Material Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 7000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
FE probe for thick layers with sliding sleeve and prism

Paint Gauge / Paint Tester LM-MCDX-52D

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Paint Gauge / Paint Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Paint Gauge / Paint Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism

Paint Gauge / Paint Tester LM-MCDX-7F

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Paint Gauge / Paint Tester. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method of this Paint Gauge / Paint Tester allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 7000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
FE probe for thick layers with sliding sleeve and prism

Paint Test Equipment / Paint Testing Equipment LM-MCDX-52D

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Paint Test Equipment / Paint Testing Equipment. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Paint Test Equipment / Paint Testing Equipment allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism

Paint Test Equipment / Paint Testing Equipment LM-MCDX-7F

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Paint Test Equipment / Paint Testing Equipment. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method of this Paint Test Equipment / Paint Testing Equipment allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 7000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
FE probe for thick layers with sliding sleeve and prism

Surface Testing LM-MCDX-52D

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Surface Testing. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Surface Testing allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism

Surface Testing LM-MCDX-7F

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Surface Testing. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method of this Surface Testing allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 7000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
FE probe for thick layers with sliding sleeve and prism

Thickness Gauge LM-MCDX-52D

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Thickness Gauge. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Thickness Gauge allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism

Thickness Gauge LM-MCDX-7F

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Thickness Gauge. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method of this Thickness Gauge allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 7000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
FE probe for thick layers with sliding sleeve and prism

Thickness Meter LM-MCDX-52D

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method for the Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: FE: 2 ... 5000 µm
Coating thickness: NF: 2 ... 2000 µm
Resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
Dual probe with sliding sleeve and prism

Thickness Meter LM-MCDX-7F

US$ 1,905.00

ex. VAT, ex. delivery costs

Numerous specialized digital probes can be connected to the Thickness Meter. This makes applications on particularly small openings, thick coatings and hard-to-reach or small measuring points possible without any problems. The magnetic induction method of this Thickness Meter allows measurements of paint, varnish, plastic, rubber, ceramics, galvanized coatings and galvanic coatings on steel. The eddy current method can be used to measure insulating layers such as paint, varnish, plastic or anodized coatings on non-ferrous metals.

Layer thickness: 2 ... 7000 µm
smallest resolution: 0.1 µm
Accuracy: ±1 % (100 ... 1000 µm)
Single measurement, scan measurement, duplex measurement
Color touch screen (320 × 480 pixels)
Data storage
USB and wireless
FE probe for thick layers with sliding sleeve and prism

Belt Tension Meter PCE-BTM 2000TVT-KIT Maintenance Kit

US$ 1,881.00

ex. VAT, ex. delivery costs

A belt tension meter measures the belt tension of a belt when it is stationary. The maintenance kit includes a vibration accelerometer for checking vibrating parts, machines and systems. It is also possible to measure the surface speed with a tachometer up to 99,999 revolutions per minute.

Belt Tension Meter

Measurement of the vibration frequency of the belt
Measuring range: 10 … 900 Hz
Accuracy: ± (1% of reading + 4 digits)Vibration Meter
Acceleration: 0.0 … 399.9 m/s² / 0.0 - 15744 in/s²
Velocity: 0.00 … 399.9 mm/s / 0.00 - 15.74 in/s
Displacement: 0.000 … 3.9 mm / 0.000 - 0.154 inTachometer
Contactless measurement: 5 … 99,999 rpm
Contact measurement: 0.5 … 19,999 rpm
Surface measurement: 0.05 … 1,999.9 m/min