With the environmental tester it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the environmental tester. The environmental tester can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function

• CO2: 400 ... 5,000 ppm
• formaldehyde: 0 ... 1.999 mg/m³
• TVOC: 0 ... 9.999 mg/m³
• temperature: 0 ... 50 °C
• relative humidity: 0 ... 99 % RH
• particulate matter: PM1 / PM 2.5 / PM 10
• interface: USB-C
• WiFi connection
• app with live data transmission

• Measured variables:
• TVOC: 0.000 ... 9.999 mg/m³
• PM1, PM 2.5, PM10: 0 ... 1000 µg/m³
• Temperature: 0 ... 50°C / 32 ... 122°F
• Humidity: 0 ... 99% r.h.
• CO2: 400 ... 5000 ppm/m
• Calculation of the air quality index (AQI)
• Interface: USB-C
• WiFi connection
• App with live data transmission

The environmental tester has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the environmental tester. This guarantees a non-destructive measurement with the environmental tester. The environmental tester is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

• Measuring range: 0.0 … 100.0%
• Resolution: 0.1%
• Measuring depth: 20 … 40 mm / 0.78 … 1.57"
• Interface: Bluetooth 4.0
• Free Android and iOS app

• X-, γ- and β-radiation
• Dose rate measuring range: 0.01 µSv/h ... 50 mSv/h
• Resolution: 0.01 µSv/h
• Accuracy: <10% at 1 mSv/h
• Dose measurement range: 0 μSv ... 1000 Sv.
• Sensitivity: 1 cps/μSv/h (related to Co-60)
• Data memory for 10,000 values
• Adjustable alarm: acoustic, visual, vibration
• Software

• O3: 0,00 ... 50.0 ppm
• Resolution: 0.01 ppm
• Accuracy: ±10% v.Mw.
• Relative humidity: 20 ... 85%
• Resolution: 1%
• Accuracy: ±4%
• Temperature: -10 ... 50°C / 14 ... 122°F
• Resolution: 1°C / 1.8°F
• Accuracy: ±1°C / ±1.8°F
• Battery operation
• Visual and audible alarm
• With standby mode

With the environmental meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the environmental meter. The environmental meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function

The environmental meter has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the environmental meter. This guarantees a non-destructive measurement with the environmental meter. The environmental meter is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

• Measuring range: 0.0 … 100.0%
• Resolution: 0.1%
• Measuring depth: 20 … 40 mm / 0.78 … 1.57"
• Interface: Bluetooth 4.0
• Free Android and iOS app

• CO2: 400 ... 5,000 ppm
• formaldehyde: 0 ... 1.999 mg/m³
• TVOC: 0 ... 9.999 mg/m³
• temperature: 0 ... 50 °C
• relative humidity: 0 ... 99 % RH
• particulate matter: PM1 / PM 2.5 / PM 10
• interface: USB-C
• WiFi connection
• app with live data transmission

• Measured variables:
• TVOC: 0.000 ... 9.999 mg/m³
• PM1, PM 2.5, PM10: 0 ... 1000 µg/m³
• Temperature: 0 ... 50°C / 32 ... 122°F
• Humidity: 0 ... 99% r.h.
• CO2: 400 ... 5000 ppm/m
• Calculation of the air quality index (AQI)
• Interface: USB-C
• WiFi connection
• App with live data transmission

• X-, γ- and β-radiation
• Dose rate measuring range: 0.01 µSv/h ... 50 mSv/h
• Resolution: 0.01 µSv/h
• Accuracy: <10% at 1 mSv/h
• Dose measurement range: 0 μSv ... 1000 Sv.
• Sensitivity: 1 cps/μSv/h (related to Co-60)
• Data memory for 10,000 values
• Adjustable alarm: acoustic, visual, vibration
• Software

• O3: 0,00 ... 50.0 ppm
• Resolution: 0.01 ppm
• Accuracy: ±10% v.Mw.
• Relative humidity: 20 ... 85%
• Resolution: 1%
• Accuracy: ±4%
• Temperature: -10 ... 50°C / 14 ... 122°F
• Resolution: 1°C / 1.8°F
• Accuracy: ±1°C / ±1.8°F
• Battery operation
• Visual and audible alarm
• With standby mode

The moisture tester for wood has a measuring range of 0.0 … 100.0%. For a measurement, the ball head is positioned on the test object by the moisture tester for wood. This guarantees a non-destructive measurement with the moisture tester for wood. The moisture tester for wood is therefore used, for example, for on-site inspections of buildings, wood and other surfaces.

• Measuring range: 0.0 … 100.0%
• Resolution: 0.1%
• Measuring depth: 20 … 40 mm / 0.78 … 1.57"
• Interface: Bluetooth 4.0
• Free Android and iOS app

This clamp on tester was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this clamp on tester.

• AC/DC current, AC voltage and frequency measurement
• AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
• DCA zero point function

• Measuring range: 0.0 … 100.0%
• Resolution: 0.1%
• Measuring depth: 20 … 40 mm / 0.78 … 1.57"
• Interface: Bluetooth 4.0
• Free Android and iOS app

This electrical tester was developed for the indirect measurement of AC/DC currents as well as the frequency. A non-contact voltage tester function and a torch/flashlight for illuminating the measuring point have also been integrated into this electrical tester.

• AC/DC current, AC voltage and frequency measurement
• AC voltage test (contactless test):   100 VAC to 600 VAC 50/60Hz 100 VAC to 600 VAC 50/60Hz
• DCA zero point function

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or standards.

• AC / DC current, voltage and resistance measurement
• 3 2/3-digit LCD display
• Power supply: 2 x 1.5V AAA battery
• Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

The HVACR tester is used in HVAC technology to monitor humidity and temperature. The measured values are output as a standard signal by the HVACR tester. Air humidity and temperature are accurately determined in this compact HVACR tester via a semiconductor component. For commissioning, the HVACR tester is supplied with a DC voltage. The measured values are output via a two-wire cable.

• With display
• Standard signal output
• Simple wall mounting
• RS-485 interface

• measurement range -40 ... +40 kPa (-400 ... +400 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• measurement range -10 ... +10 kPa (-100 ... +100 mbar)
• resolution 0.01 kPa
• accuracy: ±1 % FS
• MAX, MIN, AVG value, HOLD
• audible alarm
• 13 selectable pressure units
• USB-C with data transfer
• PC software

• Laboratory pH electrode
• Measuring range: 0 ... 14 pH
• Temperature range: -5 ... 60 °C
• Shaft / sensor material: Glass
• Connection: BNC
• Application: Food industry, laboratory, agriculture

• testing under UV light
• high UV resistance
• suitable for industrial applications on steel surfaces
• colour strength and gloss are retained over a long period of time
• processing temperature - 10 ... + 80 °C
• quantity: 500 ml

With the climate meter it is possible to determine the humidity, ambient, wet bulb and dew point temperature. Measurements up to 60 °C are possible with the climate meter. The climate meter can therefore be used universally because of its various measuring functions to determine the ambient conditions.

Measuring ranges:

• Humidity: 0 … 100% RH
• Ambient temperature: -20 … 60 °C / -4 … 140 °F
• Wet bulb temperature: 0 … 60 °C / 32 … 140 °F
• Dew point temperature: -20 … 60 °C / -4 … 140 °F
• Interface: Bluetooth
• MIN / MAX / HOLD function